Honda Civic Forum

Honda Civic Forum (https://www.civicforums.com/forums/)
-   Member's Rides (https://www.civicforums.com/forums/46-members-rides)
-   -   My few interior mods. (https://www.civicforums.com/forums/46-members-rides/302119-my-few-interior-mods.html)

AmbulanceMonkee 11-17-2007 04:18 PM

My few interior mods.
 
A couple new shots of my interior. In the past month, I've swapped to an 05 EX cluster, managed to fubar the install so my hi beam indicator didn't work, and the abs light was on, in my car doesn't have abs. Got both of those issues fixed and managed to trip my abs light by turning on the ignition with the cluster unplugged, to diagnose the hi beam issue. Got the indicator working, and took the cluster apart to put tape over the abs indicator. I would have been concerned about fixing it right, if my car had abs. In the process, reversed my gas gauge, so when you shut the car off, it went right to full. Fixed that, and reset my abs light with the DIY on the first shot. Also hardwired my radar detector, and stuck it above the mirror. Two switches seen are for fogs (didn't like the ebay switch/harness, so i made my own) and for 3 extra outlets for my GPS laptop power supply and fm transmitter. Shift knob is ebay, and may get replaced eventually, and the silver trim on the dash is Honda OEM. Also removed aftermarket tach, since i swapped to cluster with one. Other than needing a good vacuuming/shampooing, what do you guys think of my interior??

http://i79.photobucket.com/albums/j1...y/DSCN3957.jpg
http://i79.photobucket.com/albums/j1...y/DSCN3956.jpg
http://i79.photobucket.com/albums/j1...y/DSCN3955.jpg
http://i79.photobucket.com/albums/j1...y/DSCN3953.jpg
http://i79.photobucket.com/albums/j1...y/DSCN3954.jpg

metalviper 11-17-2007 04:31 PM

Re: My few interior mods.
 
i have the same switch for my fogs, but y 2?

TRIZ 11-17-2007 04:47 PM

Re: My few interior mods.
 
Looks pretty good. Same cluster, same fog light switches.

IMO, the dash kit and the knob dont match.. if it was swapped out for a sliver knob like the type r knob, it'd flow a lot better. Its just a little distracting.

Other then that, looks like a cool civic.

lordhelmet 11-17-2007 04:57 PM

Re: My few interior mods.
 
I dont like the knob at all. The rest looks great.

AmbulanceMonkee 11-17-2007 05:00 PM

Re: My few interior mods.
 

Originally Posted by TRIZ (Post 4263889)
Looks pretty good. Same cluster, same fog light switches.

IMO, the dash kit and the knob dont match.. if it was swapped out for a sliver knob like the type r knob, it'd flow a lot better. Its just a little distracting.

Other then that, looks like a cool civic.

actually tried a silver one, and it didn't match the factory silver trim/dash kit, so i gave up and used a black one, to match all the black in the interior. i kinda see your point, but black is the better of the two options. here's a pic of the old knob. nevermind the position of the old tach, it was there so i didn't end up with visible holes when i removed it, as it was only temporary till i got around to swapping clusters.

http://i79.photobucket.com/albums/j1...y/DSCN2277.jpg


Originally Posted by metalviper (Post 4263884)
i have the same switch for my fogs, but y 2?

the second one is for the extra outlets, for laptop, etc. i ran power from the under hood fuse box, fused it inline, goes through the switch, to outlets. That way i can have power with the car off to shut down the laptopt if the battery's dead, etc. outlets may eventually be removed, and switch will be used to control cold cathode lights under dash, etc., as the dx has only a one bulb dome light for interior light.

TRIZ 11-17-2007 05:32 PM

Re: My few interior mods.
 
custom shift knob!!

AmbulanceMonkee 11-17-2007 05:49 PM

Re: My few interior mods.
 
yeah, sure, when i finish cleaning up after my roommate, working 60 hours in 5 days this coming week, fixing a couple of my friends' and my sister's computers, swapping my desktop's video card and power supply to my server, and installing a new one of each in my main computer, re-bolting-on the OEM exhaust tip i ripped off on a curb the other night, changing over to my winter wheels, and checking all the bolts on my suspension, i'll see if i can find time to sand down the old knob and match the color up to the dash trim. :lol:

EG06KRS 11-17-2007 06:29 PM

Re: My few interior mods.
 
Dude I think it looks really nice. Great job!

01HonderCivic 11-17-2007 06:59 PM

Re: My few interior mods.
 
My Ep3 knob looks pretty good with my dash kit...

Your interior looks good either way though :tup:

AmbulanceMonkee 11-17-2007 07:05 PM

Re: My few interior mods.
 

Originally Posted by 01HonderCivic (Post 4263922)
My Ep3 knob looks pretty good with my dash kit...

Your interior looks good either way though :tup:

thanks. i'll look into the ep3 knob, then. if the price is right, i may pick one up

HonCiv02 11-17-2007 08:24 PM

Re: My few interior mods.
 
interior looks good, i like the cluster swap.

sl33pyriceboi 11-17-2007 08:40 PM

Re: My few interior mods.
 
invest in a revo. it'll be worth it.

AmbulanceMonkee 11-17-2007 09:28 PM

Re: My few interior mods.
 

Originally Posted by HonCiv02 (Post 4263938)
interior looks good, i like the cluster swap.

thanks, rep returned


Originally Posted by sl33pyriceboi (Post 4263944)
invest in a revo. it'll be worth it.

thinking about it. how difficult to install??

01HonderCivic 11-17-2007 09:56 PM

Re: My few interior mods.
 
Pretty much remove center console, unbolt the linkage, unbolt the shifter assembly, and redo for the revo. I'd rate it as faily simple...

gsniper666 11-17-2007 10:13 PM

Re: My few interior mods.
 
haha.. looks good man... keepin it clean is allways the best ay to go.. congrats

speedfoos 11-18-2007 11:39 AM

Re: My few interior mods.
 
Looks really good man. I'll echo on the Revo. I even wrote a DIY on it here. I think you should follow mine because it's better than the other ones. It amazes me how tall your shifter looks compare to a Revo. I'd recommend the RSX stock knob over the EP3. It will match your interior better than the EP3. Unless I'm talking out my ass and the EP3 is silver too!

Here's the Revo and RSX knob in my car.

http://img253.imageshack.us/img253/4...61smallva3.jpg

http://img186.imageshack.us/img186/3...66smallgi1.jpg

cyberphox 11-18-2007 07:31 PM

Re: My few interior mods.
 
i have those same switches..and believe it or not..i'm just curious how you drilled a hole in those slots and still got the buttons to stick in?

icuslipn2 11-18-2007 08:37 PM

Re: My few interior mods.
 
did u install your fog lights yourself, if so could u email me how to instructions i just ordered my fog lights email is icuslipn2@aol.com

gearbox 11-18-2007 08:54 PM

Re: My few interior mods.
 
handaaccessories.com has info

AmbulanceMonkee 11-19-2007 12:05 AM

Re: My few interior mods.
 

Originally Posted by speedfoos (Post 4264036)
Looks really good man. I'll echo on the Revo. I even wrote a DIY on it here. I think you should follow mine because it's better than the other ones. It amazes me how tall your shifter looks compare to a Revo. I'd recommend the RSX stock knob over the EP3. It will match your interior better than the EP3. Unless I'm talking out my ass and the EP3 is silver too!

Here's the Revo and RSX knob in my car.

That looks really good. I'll keep that in mind. Will prolly be my first mod in the spring. Right now, it's in the 30's here, and getting too cold to be out working on my car.


Originally Posted by cyberphox (Post 4264182)
i have those same switches..and believe it or not..i'm just curious how you drilled a hole in those slots and still got the buttons to stick in?

I took the blank out, drilled a hole in it big enough to fit the round part on the back of the switch with the contacts through, and then glued the back of the switch to front of the blank to hold it in there. no problem so far.


Originally Posted by icuslipn2 (Post 4264203)
did u install your fog lights yourself, if so could u email me how to instructions i just ordered my fog lights email is icuslipn2@aol.com

it's a bit in depth. i'd have to write a diy, and that's been done already, i think. check around the site, or like gearbox says, h and a has a pdf of the install instructions for dealers. should be about the same even if you get the ebay kit.

jamis33 11-20-2007 07:04 PM

Re: My few interior mods.
 
did u paint ur interior urself?? and factory head unit cmon. All a factory head unit is good for is a paperweight LOL i'd definantly reccomend gettin a different one.

AmbulanceMonkee 11-21-2007 10:33 AM

Re: My few interior mods.
 

Originally Posted by jamis33 (Post 4264879)
did u paint ur interior urself?? and factory head unit cmon. All a factory head unit is good for is a paperweight LOL i'd definantly reccomend gettin a different one.

Read the thread, dude. It's not painted, it's the OEM dash trim kit. As far as the head unit, quarters for my job is not in the nicest neighborhood. My last car got broken into and they took a pry bar to the deck. The sound from the stock stereo isn't as bad as some other cars, and leaving the audio stock minimizes the chances of someone smashing out my windows. I'm gonna get some wheel locks, and call it a day. Thieves here aren't into stealing exhausts, etc. They just smash windows and grab anything that looks expensive. I don't keep anything inside my car.

jamis33 11-21-2007 03:06 PM

Re: My few interior mods.
 
good idea i live in a small town so its not too bad but i still wanna get a good alarm just to be safe. I like the alpine head units that flip around wen u turn the car off those are sweet

pinoyboy_drew 11-21-2007 04:00 PM

Re: My few interior mods.
 
damn man looks like u did alot of work on it........completely worth it......its good!!!!


All times are GMT -5. The time now is 02:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands