pistons????
 

im gonna be bossting soon guys. looking to go with stage 2 crower cam turbo spec ans spring retainer. also looking for pistons. whatcomp should i be 9-1? where can i get these form fo rmy 04 civic ex coupe.. correct me if 9-1 is wrong for me. i think that is what boosted car woudl need.

????????help me

go to PROCIVIC.COM you'll find everything you need there

search?

you can get 9.0-1 pistons for $435 and it comes with rings @ procivic.com

check dezod?

9:1 is about as low as I would go. In addition, if you're looking for pistons, I'd look at upgrading the rods and crank as well. I'm sure the rods i this motor are tiny, but I'm not sure on the crank.


If those cams are made for NA power and have a lot of overlap, I would suggest NOT using them with boost as you'll be letting boost escape out of your exhaust.

When are you Dezod fanboyz going to learn that he is just an overpriced middleman?

HwN, For all you d17 needs i would recommend race engineering

http://www.raceeng.com/pc-7902-55-ho...ton75mm91.aspx

these are the same ones dezod sells for 100$ more.......

Rods?
http://www.raceeng.com/p-7177-crwr-b...a-17-d17a.aspx

Again dezod is allmost 100$ more, not including your gonna get riped a new one for shipping.

Just lending a helping hand :tup:

good site was going to by my head parts from dezod but this place is cheaper

hey guys .. whatis the stock compression on my 2004 civic ex coupe??????

9.9:1 fyi

tanks bro..