Rsx steering wheel
 

how hard is it to put the rsx steering wheel on an 02 coupe?

on a scale from 1-10, 10 being rocket surgery...id say 3.

its really simple just took some hard pulling to get it off the thingy there

Wtfack? :roflmao:

piece of pastel mane! there is one thing though you have to use your cruise control control from your em2 steering wheel, and since they are not completly identical you have to cut out some plastic on the steering wheel with a razor blade to fit nice and snug. other than that it should go really smooth, look and feel alot better than the shitty civic steering wheels.

http://i32.photobucket.com/albums/d1...09/inside3.jpg

http://i32.photobucket.com/albums/d1...09/inside2.jpg

Holy giant shifter, batman!

What if I don't have cruise control? Can I take off the controls from that wheel? If so, there should be a hole left out... can I cover that? :susp:

hehe.. that does look nice

so i guess the air bag plugs are the same and dont need any rewiring? looks good tho. they def feel helluva lot better and smaller than our steering wheels

no its basically plug and play besides the cruise control (the stock em2 one needs to be use) if you dont have cruise control just leave the rsx cruise control on the steering wheel and dont connect it so you dont have a hole there :-p

Do DC5s or EP3s come without the cruise buttons there? I mean, are/were they available without the cruise?

Nizzope, cept for R

Ah, the exclusivity.

what about the A logo...can i pop that out and find a H one to fit??

thinkin the same thing. doubt it would be too hard tho. either just pop it out or find something (sticker?, paint?) to cover it with

Maybe a sticker but that logo is part of the airbag so you would have to get a ep3 airbag to get the H. Might be better to track down a EP3 wheel in teh end.

only the jdm type R bags need a different plug, but no rewiring is involved.

^^^ Ooook, so that means that if I get a Type R wheel (because it looks really nice, has no cruise, it's JDM and it says MOMO :rofl:) I have to rewire? Is that very difficult?

anyone have a diy on this and is any one selling one of these

If you're looking you one of these you should check on EPHatch or ClubRSX... more probability of getting one there than here.

ramcosca, to answer your question...all you do is grab the dual stage detonator out of the stock wheel and replace the single stage jdm detonator in the jdm bag. now you have a jdm wheel with a usdm plug. no rewiring needed.

sorry noob question but if i wanted to buy oneof these am i buying just the wheel or the whole steering column?

just the wheel/bag combo.

Thanks.

It would be alot cheap, if you didn't mind, to buy the ep3 steering wheel and putting the red vinyl over it. :lol: The ep3 one actually has the red stiching in it, same as the ITR one.

so what specs of an rsx would i need for the steering wheel to be compatible for my 04 lx sdan? and do buy one of these do i go to say an acura dealership?

yeah you can buy one there. if you wanna sell your soul. dealers are the most exspensive. go to a rsx forum find someone who swapped their wheel and buy it from them. or the famous EBAY

:roflmao: