01 to 03 cluster conversion problem... =/ My aftermarket HU stopped working (did I blow something? I did disconnect the negative of the battery before starting). The ABS Light is on (I heard this was normal) I know Viper was supposed to install it for me, but I really wanted to try this DIY... (the Deck is still under warranty... but is it a plug that I got wrong?) |
I just did a buddies for him....here are some of the problems we ran into, maybe someone knows what we did wrong: - check engine light stays on (was not on, on old cluster) - gauges won't turn on unless the car is turned to accessory or on - gauges won't go back down to the bottom starting position (they are NOT stuck) |
Originally Posted by BIG I just did a buddies for him....here are some of the problems we ran into, maybe someone knows what we did wrong: - check engine light stays on (was not on, on old cluster) - gauges won't turn on unless the car is turned to accessory or on - gauges won't go back down to the bottom starting position (they are NOT stuck) -normal -not normal check engine light you could reset yourself. the gauges going back to the bottom...well open up the cluster and put them all the way down. then reset your cluster. it should work. all you canadians with your problems doing this conversion. i dont understand why it doesnt work for you guys |
ahh man you should have come to see me dude.....:( |
Originally Posted by infinite012 -not normal -normal -not normal check engine light you could reset yourself. the gauges going back to the bottom...well open up the cluster and put them all the way down. then reset your cluster. it should work. all you canadians with your problems doing this conversion. i dont understand why it doesnt work for you guys there were extra wires that weren't included in the diy....this was an lx to ex conversion, maybe there is a difference from the vp? |
Originally Posted by FaZe My aftermarket HU stopped working (did I blow something? I did disconnect the negative of the battery before starting). The ABS Light is on (I heard this was normal) I know Viper was supposed to install it for me, but I really wanted to try this DIY... (the Deck is still under warranty... but is it a plug that I got wrong?) So can anyone help me? the ABS light is on cuz I don't have ABS (can i turn off that light somehow? and anyone know what's wrong with my HU? |
I did my conversion and the only thing that went wrong was the fuel gauge. Its always reading empty and im gettin a return signal from the return unit so i think it might be the gauges....... :( |
same problem!!!!!>........its not your aftermarket headunit bro, your stock one won't work either.....I have no clue what it is |
i blew my alternator last year and my ABS light would not turn off, have you been messing with any major wires? i dunno if that helps |
nothing major :( |
OK... so I just removed the ABS Led... problem solved... now.. as for the HEADUNIT BIG was right.. stock deck won't work either DECK works in different car... checked the ACC/RADIO fuse.. fine I don't think any fuses under the hood affects the radio right? The wiring for the cluster is perfect... the cluster works great SO WHAT THE :hithead: |
I have the EXACT same problem....tonight I am going to see what happes if I connect the deck to a DIFFERENT power source. If I can get it to work on a seperate power source then I'll just leave it like that. Think about it....all you REALLY need the harness for is if you're using stock speakers. If you're not, then you don't really need the harness to work at all..... I'm going to try the same with the doorlocks |
check the fuse labelled "backup" under your hood in the fuse box.. you mightve shorted out a live wire while working/installing ur cluster or something which caused the backup fuse to blow.. this fuse is used for many accessories throughout the car.. good luck! :D |
i'll give that a try |
you're the man, nameless....I'm going to check that fuse tonight! |
faze...if you try it tonight let me know.....BTW: tape up the extra wires before you try it...otherwise you might blow it again |
Wow!! This conversion seems kinda scary lol....... |
the scary thing is: How the heck does the HU stop working when ur working on the cluster... =/ |
lol.....at least ur fuel gauge is working :rofl: |
the headunit will stop working if you disconnect the battery.... |
^ LOL I hope he knows that :giggle: Any luck ???? |
Yes we figured it out! Nameless hit the nail on the head!!! :tup: :tup: We checked the "Backup" fuse in Big's car lastnight and low and behold it was blown. We replaced it now and the cluster works fine (all the needles reset), the remote power door locks work again, and finally the deck has power and his AVIC-N1 is up and running!! |
All times are GMT -5. The time now is 08:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands