b16a1 with hydro tranny wuz ^ fam. im going to get a b16a. the problem is im going to go for boost after installin the motor. I have consulted a performance engine mechanic and he said that the cable tranny is not good for boost. So can I go and take the tranny off of the b16a2 and put it on the b16a1. Will there be any conflicts? thanx a lot for ur posts. ExR |
Re: b16a1 with hydro tranny Originally posted by ExRacer wuz ^ fam. im going to get a b16a. the problem is im going to go for boost after installin the motor. I have consulted a performance engine mechanic and he said that the cable tranny is not good for boost. So can I go and take the tranny off of the b16a2 and put it on the b16a1. Will there be any conflicts? thanx a lot for ur posts. ExR |
umm. chrissy darling itz 4 my 94 civic. not 7th gen. where in fla do u live chrissy? |
the tranny will work find in a boosted application. it's a hydraulic clutch, and is similar with just about every other stick shift car out there nowadays. i dont know what the guy who told you that was talkin about. |
You would have to take the tranny from a B16A2 anyway because 94's are hydro trannys. Unless you went with a mount kit to run a cable transmission. Reason people do this is its a lot cheaper to replace a cable tranny then a hydro one if you break it. The gearing is basicly the same just the feel of the clutch is a lot different between the 2. so id say get the b16A2 Tranny with a LS 5th gear should be pretty happy with that set up. Enjoy your boost. |
All times are GMT -5. The time now is 05:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands