D16A Clarification Hey, just a quick clarification if someone can chime in. Im looking at replacing a blown D16Y8 in a 2000 Civic EX. Ive have a lead on a reasonably priced JDM D16A Non VTEC. Am i correct in my assumption that this is not a Y8 equivalent, but rather a Y7 equivalent. Am i correct in my assumption that a direct swap will result in multiple CELS due to lack of VTEC and Crank sensor? Is there anything other than a Y8 that can be swapped in without issue? Ideally i would put a low milage Y8 in and be done with it, but all I'm finding is JDM stuff or sketchy local pulls. It is listed as both a Y8 and Y7 equivalent, which as far as i know is not possible. Y8 in question is over 250k, so i really don't want to swap anything over. Trying not to get burned by a potentially clueless seller. Thank You |
Re: D16A Clarification
Originally Posted by makezee
(Post 4735608)
Ive have a lead on a reasonably priced JDM D16A Non VTEC. Am i correct in my assumption that this is not a Y8 equivalent, but rather a Y7 equivalent. |
All times are GMT -5. The time now is 02:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands