Need Help? Let Me Know Anyone looking for help installing or diagnosing audio, computers and so on let me know. I live in Bridgeton NJ 08302. I will travel up to 3 hours for someone who wants to learn or needs help. Let me know Pm me your aim or yahoo messenger screen name reimermatt.:rofl: |
Re: Need Help? Let Me Know great guy! friendly and very very very helpful! |
Re: Need Help? Let Me Know Thanks here is one of the cars I am working on right now. Taking my time and doing it right I had to redo mostly everything. http://www.caraudio.com/forum/showthread.php?t=396922 |
Re: Need Help? Let Me Know I'd appreaciate it if you could take a look at this: https://www.civicforums.com/forums/1...ml#post4407067 I am in Flemington 08822 |
Re: Need Help? Let Me Know woot! bigaudiofan did it again! helped me with sub install and issues! hit him up with questions!!!! |
Re: Need Help? Let Me Know I sent u a pm |
Re: Need Help? Let Me Know Can you please take another look at my thread? https://www.civicforums.com/forums/1...ark-plugs.html |
Re: Need Help? Let Me Know 12 Attachment(s) So last week I did an install on a 2009 Nisan 370Z take a look. Here he comes Attachment 109503 Attachment 109503 Start wiring Solder all up Attachment 109505 Heat shrunk Attachment 109506 Dash taken apart Attachment 109507 Attachment 109508 MMMMMMMMM Wires Attachment 109509 Antennas Sirius and GPS Attachment 109510 Attachment 109511 Head Unit installed Attachment 109512 Attachment 109513 Attachment 109514 Let me know what you think |
Re: Need Help? Let Me Know Nice job man |
Re: Need Help? Let Me Know Thanks |
Re: Need Help? Let Me Know Bump |
Re: Need Help? Let Me Know This one was a big one I will quote his review so you can read it. So Matt helped me install a kickass system in my 2008 Accord. It took a couple of days and a lot of driving but it was definitely worth it. Matt is a chill guy and we got along well right from the start. I pulled into his driveway on Saturday morning a little before 8am and he had all of his tools and supplies laid out and ready to go. We installed: JL C5-650 components in front JL C5-650x coaxials in rear JL Slash 300/4v2 amp Infinity 10" Basslink JL CleanSweep MTX Re-Q Dynamat Xtreme on floor, doors, rear deck and under back seat We started off by stripping the interior of the car: http://3rror.org/nkimages/audio/smaller/DSC00942s.jpg Then we jumped right into laying down the Dynamat .. here is the passenger's-side floor: http://3rror.org/nkimages/audio/smaller/DSC00949s.jpg Door before Dynamat http://3rror.org/nkimages/audio/smaller/DSC00954s.jpg Door after Dynamat http://3rror.org/nkimages/audio/smaller/DSC00967s.jpg Fuse holder mounted http://3rror.org/nkimages/audio/smaller/DSC00979s.jpg Cleansweep wired up, not yet secured http://3rror.org/nkimages/audio/smaller/DSC00989s.jpg Amp being wired up http://3rror.org/nkimages/audio/smaller/DSC00988s.jpg One of the rear crossovers mounted http://3rror.org/nkimages/audio/smaller/DSC00987s.jpg Finished!! http://3rror.org/nkimages/audio/smaller/DSC00993s.jpg http://3rror.org/nkimages/audio/smaller/DSC00994s.jpg Overall it took us about 25 hours spread out over 4 days (with breaks and stuff). Matt made the two and a half hour drive up to my place twice without hesitation. He did great work and I learned a lot along the way .. if you need any car audio stuff done, contact matt (AIM reimermatt), you won't regret it. |
Re: Need Help? Let Me Know 8 Attachment(s) Here are a few older installs 97 Volvo 850. It was probably one of the more easier installs I have done. Here are some picks of the install.:cool: The loot Attachment 109168 The wiring harnesses getting ready to be all soldered http://i483.photobucket.com/albums/r...o/100_1058.jpg The hole for usb port Attachment 109169 The usb port Attachment 109170 The sirius radio power plug lets mod it a little Attachment 109171 Open it up Attachment 109172 Solder it up Attachment 109173 Heat shrink it all ready for being wired behind the dash after being wrapped in electrical tape. Attachment 109174 Location of sat radio needs some mounting Attachment 109175 |
Re: Need Help? Let Me Know 5 Attachment(s) Not many pics but I also did a amp and a sub in this when he gets back from iraq I will finish it. Here he comes Attachment 109163 The Loot Attachment 109164 Open Her up Attachment 109165 Head unit installed no pics of wiring :( Attachment 109166 He is out until next time Attachment 109167 |
Re: Need Help? Let Me Know 5 Attachment(s) Not many pics but I also did a amp and a sub in this when he gets back from iraq I will finish it. Here he comes Attachment 109158 The Loot Attachment 109159 Open Her up Attachment 109160 Head unit installed no pics of wiring :( Attachment 109161 He is out until next time Attachment 109162 |
Re: Need Help? Let Me Know All those were some older builds I have done. I am getting ready to be flown to LA for 2 more 370z installs, on top of that 2 more local Z's in my area. |
Re: Need Help? Let Me Know This guy is seriously one of the nicest people I've met in a while, after talking via AIM for an hour or two, we met up and got my aftermarket head unit to work. Very friendly and well mannered. Def hit him up if you need help, highly recommended! |
Re: Need Help? Let Me Know Thanks man, it was good to meet you and see a nice si. I am glad I got everything resolved for you. Hope to hear from you soon for the rest of the system upgrade. As for anyone else that needs help just let me know and I can help out. |
Re: Need Help? Let Me Know I have an Alpine CDA-9805 CD player/radio. Recently the volume of the radio has gotten very low. I can only make out a couple of words occasionally if everything is quiet and the car is not moving. If the car is moving, or if there is any noise, I can barely hear the music and can not make out any words. I live in Seattle. Do you have any suggestions? |
Re: Need Help? Let Me Know Well it can be a number of things, the first thing that comes to mind is that the internal amp could be going out OR could be shut off "if you are using the internal amp to power the speakers" Look for something in the setting about internal amp on and off. If you are using a external amp it could be that the rca pre out puts are going on it, or the amp could be failing. It also could be but a very slim chance that the speakers are being grounded out on a piece of metal and muting the power that the internal amp is putting out. It is an older unit but not that old, if none of those things work call up alpine and tell them what is going on even though ti is probably out of warranty, they are very good at repairing them for free or at a low price. Let me know what you find out so I can help you more. Good Luck |
Re: Need Help? Let Me Know 9 Attachment(s) Here is one I did a while ago, it was a friends car. Okay so today I started on my friends Honda civic i believe its a 91 but not sure. He installed the system himself and I will give him his props he did a good job. But now loaded with the right knowledge and my help we are going to overhaul the entire system. So enjoy the pics and the work to come. The ride Attachment 108829 Attachment 108830 Attachment 108831 The center counsel Attachment 108832 Attachment 108833 Torn out Attachment 108834 The small power wire sight and it was running a sony 1200 watt amp Attachment 108835 Attachment 108836 Can we see the difference?:laugh: Attachment 108837 |
Re: Need Help? Let Me Know 7 Attachment(s) Interior mostly gone Attachment 108822 Attachment 108823 Dual speakers Attachment 108824 Attachment 108825 Old subs Attachment 108826 All the painted parts are going to be repainted black Attachment 108827 After I cleaned the engine Attachment 108828 So all and all not bad he did a good job just didn't know what to get so tomorrow i will get picks of the stuff that's going in. |
Re: Need Help? Let Me Know 5 Attachment(s) e got started today by running the wires. Here are some pics. The factory grommet Attachment 108817 Running of the 4 gauge Attachment 108818 Running the 4 gauge threw the grommet Attachment 108819 All ran threw the fire wall http://i483.photobucket.com/albums/r...t/100_1156.jpg Running the wire threw the wall always needs a helper. Just so happened he was there to learn and work. He like to get to work and learn. "pic in a bit" Ran threw some holds in the floor braces. Attachment 108820 Me and him just taking a nice shoot of us and our cars. Attachment 108821 |
Re: Need Help? Let Me Know 5 Attachment(s) Okay did some more work today. This day I re ran the angle eye wires. The wires as they basically were Attachment 108812 Soldered the + wire Attachment 108813 The wires all hidden the + wire is under the intake and the ground is under that rely bolt on the left. The wire was ran threw expandable tubing and the solider point was covered in head shrink Attachment 108814 The right side all tucked in Attachment 108815 The wire ran to the fire wall before it actually was ran threw http://i483.photobucket.com/albums/r...c/100_1167.jpg Put the Kicker L5'sin the trunk as well Attachment 108816 More work done tomorrow!!!!! |
Re: Need Help? Let Me Know 9 Attachment(s) Okay yesterday we got back to working on the car. After the 2 days of rain. We fabricated the bracket for the fuse holder, and finished the angle eye power wire and the sub connections. Measuring the hole locations for the bracket. Attachment 108803 Jerry's first time using a drill press I let him drill the holes. Attachment 108804 Brackets location made some pilot holes for easier install of the taping screws. Attachment 108805 What the bracket will look like mounted Attachment 108806 Bracket installed Attachment 108807 Fuse holder installed going to cover the wire in black expandable mesh tubing Attachment 108808 The wires for the angle eyes installed all soldered to the switch Attachment 108809 Attachment 108810 Both subs wired up to make out to 2 Ohms Attachment 108811 |
Re: Need Help? Let Me Know 2 Attachment(s) Were the amp will go I am fabricating a bracket so the wires can tuck underneath it Attachment 108801 One of the panels after sanded and repainted MUCH BETTER THAN RED Attachment 108802 |
Re: Need Help? Let Me Know 6 Attachment(s) Haven't rely done much these past days. But here are some more panels that have been repainted. Attachment 108795 Attachment 108796 Attachment 108797 Attachment 108798 Attachment 108799 Attachment 108800 More work after the rain stops some more real progress can begin again. LOL |
Re: Need Help? Let Me Know 6 Attachment(s) Okay today we finished up the spray painting. Also made some gap brackets for the amp to sit up on so the wires can be ran underneath. Here is Jerry cutting the wood for the gap brackets. Attachment 108789 A look at how it will sit. Attachment 108790 Painting them Attachment 108791 Attachment 108792 How it looks painted it will set on top of the sub box. Attachment 108793 The final pieces all done painting Attachment 108794 Next pics will be speakers and head unit |
Re: Need Help? Let Me Know 4 Attachment(s) Yesterday finished the amp install and installed a temp head unit to test it out. Sounds rely loud to loud for me but for him it's good. Quick wiring up to test it. Attachment 108785 Wired it up with wires all tucked. Attachment 108786 All finished with that Attachment 108787 Wires all cleaned up will probably clean them up a bit more. Attachment 108788 |
Re: Need Help? Let Me Know 4 Attachment(s) Yesterday finished the amp install and installed a temp head unit to test it out. Sounds rely loud to loud for me but for him it's good. Quick wiring up to test it. Attachment 108781 Wired it up with wires all tucked. Attachment 108782 All finished with that Attachment 108783 Wires all cleaned up will probably clean them up a bit more. Attachment 108784 |
All times are GMT -5. The time now is 05:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands