Does anyone else have this problem?...
 

http://www.7thgencivic.com/old_attachments/intake3.jpghttp://www.7thgencivic.com/old_attachments/intake2.jpg
I noticed that my Injen CAI is hitting on a screw and getting messed up. The blue arrow in the first pic points to the screw and the red arrow points to the point of contact on the intake. The vibra mount makes for alot of play and I guess my intake gets thrown around with all that power under the hood!![IMG]i/expressions/laugh2.gif[/IMG] But seriously, I've narrowed the cause down to wheel hop and pulling 2nds. Sometimes my crappy firestones spin and I have lots of bad wheel hop, so I guess it could bang the intake against that bolt and fu(k it up. I also pull alot of 2nd gear peel outs (or tire chirps). Maybe the intake hits against the bolt when I shift into 2nd and punch it. I'm leaning more towards the wheel hop thing because I have some very violent wheel hop sometimes. How do you fix that? And the whole point of this post is so I can ask.....Has this happened to anybody else, or have you every heard of this happening?

i don't know if this will work, but you could try using some of that liquid electric tape on the bold or some other rubber coating (available at hardware store) that would probably help lessen the problem...and it isn't too hard to get off....least the rubber coating isn't...the liquid e. tape might be...

I'll try that along with the other solution I thought up. Thanks.
So out of all the people with the Injen CAI, nobody has ever had this problem?[IMG]i/expressions/face-icon-small-confused.gif[/IMG]