Hatch back lock broken So I bought this car recently about a month ago and the hatch back doesn't open it's either locked and won't unlock. Or something I'm hoping to get some help with this. I pull the handle and nothing happens so that's detached from the levers in side the door and neither of my keys will go I. The lock cylinder let alone unlock it. https://cimg5.ibsrv.net/gimg/www.civ...d1f8aff0ab.jpgThere is no pop truck lever or button. https://cimg6.ibsrv.net/gimg/www.civ...83aa71088e.jpgThis is as far as I can get the key in the cylinder https://cimg8.ibsrv.net/gimg/www.civ...443ce6fa02.jpgSide veiw |
Re: Hatch back lock broken Squirt penetrating oil into that lock cylinder and give it a little time to soak in Remove trims from door sill and levers, see if you can work the cable manually? Fold down rear seat, access the latch or linkage from inside (may require removing trims or entire panels from the tailgate, IDK what is there to work with) |
Re: Hatch back lock broken I squirt penetrating oil in there it honestly feels like someone tried to smash the pins to break into it and I can't even get the hatch open at all to remove any of the plastics from inside and I'm not sure what triks your talking about on the outside .the plastic with the Honda symbol on it? |
Re: Hatch back lock broken If you pull apart your drivers side sill plate and get access to the cable that goes to the trunk you might be able to manually push the cable to pop open the hatch. Can always get a dremel and cut the interior plastic to make a access to back side of the latch.. Swing by a junkyard to get replacement piece of trim if your concerned, else stuff a stuffed panda or something in the hole.. |
Re: Hatch back lock broken
Originally Posted by WoozyBigfoot
(Post 4751786)
I squirt penetrating oil in there it honestly feels like someone tried to smash the pins to I can't even get the hatch open at all to remove any of the plastics from inside and I'm not sure what triks your talking about on the outside .the plastic with the Honda symbol on it? Can always get a dremel and cut the interior plastic to make a access to back side of the latch.. |
All times are GMT -5. The time now is 04:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands