Honda Civic Forum

Honda Civic Forum (https://www.civicforums.com/forums/)
-   1st - 5th Generation Civic 1973 - 1995 (https://www.civicforums.com/forums/184-1st-5th-generation-civic-1973-1995)
-   -   Need help with zc motor!!!!! (https://www.civicforums.com/forums/184-1st-5th-generation-civic-1973-1995/358701-need-help-zc-motor.html)

92beater 02-07-2014 09:56 AM

Need help with zc motor!!!!!
 
Bought a 92 civic with a zc motor swap. I know it's a 1.6 vtec. I'm rebuilding the motor and need to know if the American parts are interchangeable like timing belt, thermostat, head gasket, intake gasket, rod bearings, cam seals. My vin is zc7416576. How do I decode it and how do I know how to tell what it came from.

Lordsin 02-10-2014 12:51 AM

Re: Need help with zc motor!!!!!
 
Is it the Zc Sohc or Dohc?

92beater 02-11-2014 05:32 PM

Re: Need help with zc motor!!!!!
 
Sohc. I ordered all parts for a d16y8

Poopies 02-11-2014 09:29 PM

Re: Need help with zc motor!!!!!
 

Originally Posted by 92beater (Post 4657507)
My vin is zc7416576. How do I decode it and how do I know how to tell what it came from.

"SOHC ZC VTEC

VTEC

Found in
1991–1993 Honda Civic Ferio EJ3 (JDM)
1992–1995 Honda Civic EJ1 (JDM)
1992–1995 Honda Domani MA4 (JDM)

Souce: Wikipedia
http://en.wikipedia.org/wiki/Honda_D...e#SOHC_ZC_VTEC

As far as parts go, those cars would be the first place to look. It seems like most articles on the internets discuss the non-VTEC DOHC model. You're 100% sure you have the SOHC VTEC version??? That means he must have gotten the engine shipped out from Japan!
What trim is your car, then? The VIN should be 17 characters if the body is a US model.

92beater 02-12-2014 10:06 PM

Re: Need help with zc motor!!!!!
 
Yes I'm positive it's a zc sohc! Guy said it was an imported motor. Ordered parts from a 98 d16y8. And my car is a dx

xRiCeBoYx 02-12-2014 11:41 PM

Re: Need help with zc motor!!!!!
 
I've heard, though never seen nor experienced personally, of the sohc vtec zc. Per the wiki article, it's most similar to the D16Z6. USDM cars that had that engine: 92-95 si and ex as well as the 93-95 del sol si

Not saying I doubt that you have a sohc zc vtec, but you can always check the engine stamp to verify engine model.
http://asia.vtec.net/topics/engcode1.jpg


Also, if you're standing in front of the car, there will be a vtec solenoid sticking up on the upper left hand side of the valve cover. (The top red circle in this pic)
http://forums.trinituner.com/upload/...0Small%20s.JPG

92beater 02-15-2014 10:40 PM

Re: Need help with zc motor!!!!!
 
1 Attachment(s)
Yes! This motor is a zc, 1.6 vtec sohc. The serial I gave was from the stamp. Yes I know it's a vtec because if that solenoid. Here is a pic to clarify.
Attachment 92133

xRiCeBoYx 02-16-2014 12:00 AM

Re: Need help with zc motor!!!!!
 
Like I said, wasn't doubting you. I think my post was to really put Poopies' mind at ease that you knew what you were talking about.

Poopies 02-16-2014 12:36 AM

Re: Need help with zc motor!!!!!
 

Originally Posted by xRiCeBoYx (Post 4657937)
I think my post was to really put Poopies' mind at ease that you knew what you were talking about.

Why thank you, I was pretty troubled over it :-P

The engine looks nice, that's quite the gap in there though! lol

92beater 02-16-2014 09:02 AM

Re: Need help with zc motor!!!!!
 
Ea I know there's no ac or power steering. I'll be adding them back to it. Along with getting rid of that ugly blue.


All times are GMT -5. The time now is 08:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands