1993 civic map sensor prob
 

i have a 93 civic cx and i did a motor swap to the b7. My check engine light is showing bad map. Well i looked under the hood and no map. i researched online and i guess the cars that had the b7's the map was on the firewall. So then i bought a map sensor and now i cant find the plug. i read online the firewall map sensor has it own harness that goes through the firewall and doesnt connect to the engine harness. What should i do so i can plug a map up.

Re: 1993 civic map sensor prob
 

can anyone help i have no clue on what to do

Re: 1993 civic map sensor prob
 

Could it be number 10? http://www.hondapartscheap.com/south...t=0&quantity=0 (click to enlarge pic)

You could try calling Honda but, I've pretty much lost confidence in the dealers.

May want to go to the salvage yard and pull one.

Did you use a B7 harness? It may be on the B7 harness.

Re: 1993 civic map sensor prob
 

yes i used the b7 engine harness but like i said i did research and it said its nopt connected to the engine harness it goes in directly through the firwall and to the ecu. So do i need to run the sensor directly to the ecu? If so i have no clue where to slice in.

Re: 1993 civic map sensor prob
 

I would try to get one at the salvage yard first. As to making your own harness I'll do some research and get back to ya. I know you'll need connectors to make the harness tho.

Re: 1993 civic map sensor prob
 

k and ya that would be great. Are the interior harness just about the same on the cx and dx length wise. If i bought inside harness i could just swap it out than i would have the connector unless it less pain to create my own harness.