01 to 05 center console
 

i looked around but couldnt really find a good answer. does anyone know if the 05 center concole swaps with an 01 center console. it looks like it does but i would like to make sure. what about the ebreak? does it need to be swapped also? thanks for the help

Re: 01 to 05 center console
 

yea, it will fit. mine is a '01 and i got a used '05 from ebay. it bolted right on. but the thing is it came with an e-brake and shifter so i just took off the old one. chnage your e-brake and shifetr and you're fine.

Re: 01 to 05 center console
 

alright thanks.....does it look like u NEED to change the ebrake?

Re: 01 to 05 center console
 

hey cargeek,
are you taking bout the ebreak cover?? and can you please take pictures of ur console swap?? i have an 01 lx.. without the extra cup holder cover.. thinkin bout doing a swap also.. i love the armrest.. please let me know..

Re: 01 to 05 center console
 

do you have to change the whole shifter and ebrake assembly?

Re: 01 to 05 center console
 

yeah u need to change the whole ebrake assembly bc the brakets hold the console out of place.

Re: 01 to 05 center console
 

are you talkin about # 1 and #2 off this site: http://www.hondaautomotiveparts.com/...+BRAKE+%282%29

Did have to do any modification to the tention of the line?
What do you mean by changing the shifter?

Re: 01 to 05 center console
 

I thought the ebrake handle was larger on the 01's....

The 03+ has a small area to slide the ebrake though. I'm not sure if it matters but it's food for thought

Re: 01 to 05 center console
 

any modification for the shifter?

Re: 01 to 05 center console
 

I can't see why they would be any different. It's not like the shifter location moved

Re: 01 to 05 center console
 

they seem, slightly different

Re: 01 to 05 center console
 

ok, here's what i came up with whem i went to do it. the shifter assembly looks exactly the same on the 01 auto and an 05 auto. the brackets that you screw into on the consoles are different. on the 05 there are 3 screws inside the armrest, and the brackets underneath come up a few inches to meet the bottom of the armrest cubbyhole thingy. the 01, having no armrest, screws into a bracket closer to the floor and at the back/bottom of the console, near the cupholder.

i was doing a 05 into an 01. the part that was holding it off center was the brackets that you scre into. from what i could tell, it just looked like on thing needed to be changed. that was the brackets to screw the 05 console into, they also hold the ebrake cable( where the two cables come to the one that is attached to the handle) the end

Re: 01 to 05 center console
 

im actually in the process of doing this swap too... i have a 01 lx and just got a 05 ex console... w/out knowing what i was doing, i dive right into it and found out the 01 e-brake doesnt fix correct w/ the new console... its too far back to where the hole for e-brake to sit out of the console... i have to either realign my ebrake or something to it... as for the shift knob, i need the newer 05 one because its shaped differently too... it wouldnt look uniform w/ my old shift knob...

at this point, i might just grab a new ebrake for the 05 and install that in or just realign my old ebrake and try that out... im not really sure about my ebrake install since i dont want to mess it up and not have that function available so any suggestion on how to remove & install a new one would be appreciated...

the feel of having the arm rest & cupholder cover is really really nice.. i enjoy it better than having all those open to the public exposing what you got going on in your car...

hope that helps w/ these questions...