ABS light how to fix ?
 

does any1 had this prob
my ABS light popup in my dash
i hve about 55,800 miles

if some1 knows how to fix this plz help me

thankx

Um...take it to a dealer or repair shop and have them look at it. That light comes on when there is a problem with your ABS system, which is really something that should be looked at, considering it affects how your car stops moving...

thankx i will take it their then

Agreed BIG problem!!!

Dealer OR your trusted mechanic!

Mine came on once after being caught in a flash flood so I took it in to be safe just incase. Nothing was wrong, they just had to reset it, cost like 50 bucks for them to inspect it but worth every penny. Things like that should ALWAYS be checked out by the dealer. Good luck, hopefully nothings wrong and just needs to be reset.

~n~

thankx dude

try unplugging and plugging your bat then drive it around see if it come on. if so take it in.

bat ?

ya it's a good idea to try. :)

He wants you to reset your ECU!

unplug the bat. for about an hour (IMO) plug it back in start car, check for CEL (check engine light) :)

i alrady hve cel on cuz of my cat
so that plug out from ecu for an hour and then plug it back ?

Do you have a code reader??? if not I would sudgest in investin in one! (e-bay $30)

So you can watch ALL CELS that come through.

Any who your cel due to your cat & your ABS are two seperate lights.

Un-plug you battery. Wait an hour. plug back in. Start car.

If the ABS is on still go to the dealer! :)

My ABS went on before after doing some FWD burnouts. I took the fuse out and disconnected the battery. After awhile it went away. I'm still not sure how I fixed it. hahahaa

my abs light turns on when i first start the car then it disappears in like 2 secs.
is that normal? or should it be off all the time.

Yes it's normal.

All the light should come on for 2 sec...

here i hve remote start and i didnt install the switch to turn the alaram off (the one people install under the hood and under the stering)
i do hve remote
when i disconnect the battery after hour connect the battery my alaram will be armed now i can just use my remote i dont need to use that switch $hit do i.....would it be any problem ????

un arm

diconect

wait

reconnect

start

check for lights

disconnecting the battery will not reset the ecu...that is obd I, we are obd II.....you need a scanner to read the code and find out what the problem is, fix the problem then clear the code.

Hmmm! only obd1 will reset hu...

:lol: good one

Soooooooooo, OBD1 will RESET?????????? Or NOT??????????? ^^^^^

if the car is OBD I which ours in NOT...then yes disconnecting the battery for a certain periode of time will reset the ecu....so if you want to clear codes on ours you need a scanner.

I have a scanner!

I understand my car is obd2!

Just clearifing...

i found out how to take care this
scanner wont clear the code....i tryd....
i will wirte diy on this tomo if i get time....

no problem with your ABS then...?

yaa
it came on cuz when i was racing my one wheel was speining faster then other and that made my light go on
so now i need find 2pin connector for this if some else knows which one
i need to jump it.........
not the SRS 2pin connector i belive (yellow one)....
will be another 2pin connector somewhere under the staring ??? supose to white or green

Wo! Good Luck!

oh and i believe that disconnecting the battery or taking out the ECU fuse does reset the ecu. i know because i have had to do it a couple of times.

disconnecting battery didnt work for me
now where is the ecu fuse........would it be safe to do this

also if some one can find out two pin connector by the passanger side under the dash...
can't find under the staring so has to be somewhere by ecu....thankx

Owners Manual! has a FULL diagram guys! :tup:

my abs light has been on also..... but my friend told me it was a fuse prob. duno i havent taken it in yet....... if any one finds out lemme kno also