Sup E-Town Crew...I installed my Koni's
Thread Starter
GODLIKE
Joined: Apr 2001
Posts: 2,449
Likes: 0
From: Chinatown, Alberta, Canada
Rep Power: 0 
Sup E-Town Crew...I installed my Koni's
Well we finally did my fronts.....ugh..to crazy...Blown, Cisco and I did last Saturday....and ran into a few problems...
LINKAGE TO PROBLEMS
But it all worked out well....So now I would consider us super hardcore...hahaha...We can install Springs, Coilovers, Exausts, Struts, Strut Bars, Short Shifters, Pullies, Clear Headlights....and some other small things....
SO
to us...hahaha j/k... Just wait till my car is finished..then we will all meet up....!!!
LINKAGE TO PROBLEMS
But it all worked out well....So now I would consider us super hardcore...hahaha...We can install Springs, Coilovers, Exausts, Struts, Strut Bars, Short Shifters, Pullies, Clear Headlights....and some other small things....
SO
to us...hahaha j/k... Just wait till my car is finished..then we will all meet up....!!! 
Registered!!
Joined: Sep 2002
Posts: 540
Likes: 0
From: Fuken Cold, Alberta, Canada
Rep Power: 0 Now hopefully he'll drive better.........
Nah......ain't gonna happen......this is Laurence we are talkin about....should be Crazzzy AsianPride.....
I'm glad the install finished.......at least we have the experience now!!!!
Nah......ain't gonna happen......this is Laurence we are talkin about....should be Crazzzy AsianPride.....
I'm glad the install finished.......at least we have the experience now!!!!
Registered!!
iTrader: (3)
Joined: Feb 2003
Posts: 702
Likes: 0
From: edmonton, Alberta, Canada
Rep Power: 0 omg, how much did ur shocks cost? send me the DIY link plz, ****, if you guys did it, now i wanna try to install myself... ****... haha. really man, post up pics, i wanna see how it looks.
Thread Starter
GODLIKE
Joined: Apr 2001
Posts: 2,449
Likes: 0
From: Chinatown, Alberta, Canada
Rep Power: 0 Well the DIY is here
CLICK IT
Easy to follow...but I hope you don't run into the problems we did....But we have taken the struts out so many times...we don't need insturctions....I would go to honda and ask them to print you out a copy of how to install the struts..cuz that's what we used in the first place to learn how to install my Coilovers...big help..gives you all the right torque values to...but we have done it like 10 times now...hahaha..we don't need insturctions...but if you are gonnna do it...read a lot before you tackle this job..cuz it's about a 8-10 for difficulty.....
But if you got specific questions..ask me, blown, or cisco....
When I took my car off the jack...it was a good 1 inch lower..haha....like 5 fingers off the ground in the front...so I had to raise it up a lil bit....
CLICK IT
Easy to follow...but I hope you don't run into the problems we did....But we have taken the struts out so many times...we don't need insturctions....I would go to honda and ask them to print you out a copy of how to install the struts..cuz that's what we used in the first place to learn how to install my Coilovers...big help..gives you all the right torque values to...but we have done it like 10 times now...hahaha..we don't need insturctions...but if you are gonnna do it...read a lot before you tackle this job..cuz it's about a 8-10 for difficulty.....
But if you got specific questions..ask me, blown, or cisco....
When I took my car off the jack...it was a good 1 inch lower..haha....like 5 fingers off the ground in the front...so I had to raise it up a lil bit....
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
mjdiaz89
Mechanical Problems/Vehicle Issues and Fix-it Forum
14
Jun 21, 2016 09:26 PM
OptimisticWay
7th Generation Civic 2001 - 2005
46
Oct 15, 2015 02:16 PM
Wankenstein
Mechanical Problems/Vehicle Issues and Fix-it Forum
17
Jul 23, 2015 11:48 PM
EM_WON
Suspension Performance Modifications
4
Jul 22, 2015 06:49 PM
