Integra Seats or RSX seats
Thread Starter
Registered!!
iTrader: (2)
Joined: Jan 2002
Posts: 442
Likes: 0
From: wild wild west
Rep Power: 0 
Integra Seats
hey guys.
i am woundering will the Integra or RSX seats fit into our cars.
i am currently looking for new seats for my car that is more comfortable, especially on turns.. if you know what i mean. My interior is Tan.. so buying aftermarket seats are out of the question. At the moment.. i found two differant pairs of seats. Base RSX Leather seats and 01 Integra Leather seats. Ive noticed a member on this site have installed Celica Seats into his ride w/ custom brackets. will these Acura seats become a bolt-on on our 7th gens? for the previous gens, Integra seats were bolt ons. i just have slight doubts that it will fit perfectly into our cars.
so yea.. are RSX or Integra seats bolt-ons for our 7thgens?
i am woundering will the Integra or RSX seats fit into our cars.
i am currently looking for new seats for my car that is more comfortable, especially on turns.. if you know what i mean. My interior is Tan.. so buying aftermarket seats are out of the question. At the moment.. i found two differant pairs of seats. Base RSX Leather seats and 01 Integra Leather seats. Ive noticed a member on this site have installed Celica Seats into his ride w/ custom brackets. will these Acura seats become a bolt-on on our 7th gens? for the previous gens, Integra seats were bolt ons. i just have slight doubts that it will fit perfectly into our cars.
so yea.. are RSX or Integra seats bolt-ons for our 7thgens?
old integra fronts will fit with modifications to your rails...rears wont fit....RSX fornts fit...have to drillone mount whole. rear seat backs need $150 i nmod work, and you loose your pass through inless you custom make it....all other tegs had 50/50 rear seats..civics have 60/40
selling my graphite black cloth interior from my 2001 civic coupe , front and rears.....bolts in [IMG]i/expressions/face-icon-small-cool.gif[/IMG]
selling my graphite black cloth interior from my 2001 civic coupe , front and rears.....bolts in [IMG]i/expressions/face-icon-small-cool.gif[/IMG]
Registered!!
Joined: Jul 2002
Posts: 409
Likes: 0
From: toronto, Ontario, Canada
Rep Power: 0
Quote
[hr]Originally posted by: cvc2k2
ohhh just the front seats. its mainly for the driver.. and teh passenger too! i just want something that will hug me when i turn..[hr]
[hr]Originally posted by: cvc2k2
ohhh just the front seats. its mainly for the driver.. and teh passenger too! i just want something that will hug me when i turn..[hr]
Registered!!
iTrader: (1)
Joined: Jul 2002
Posts: 2,699
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 0
Quote
[hr]Originally posted by: astropunk
then get a gf!!![hr]
[hr]Originally posted by: astropunk
Quote
[hr]Originally posted by: cvc2k2
ohhh just the front seats. its mainly for the driver.. and teh passenger too! i just want something that will hug me when i turn..[hr]
[hr]Originally posted by: cvc2k2
ohhh just the front seats. its mainly for the driver.. and teh passenger too! i just want something that will hug me when i turn..[hr]
to my knowledge, the type S leather only come with SRS, but have to check on the base, with leather package... www.acura.com prolly has an answer for that one[IMG]i/expressions/face-icon-small-wink.gif[/IMG]
Thread Starter
Registered!!
iTrader: (2)
Joined: Jan 2002
Posts: 442
Likes: 0
From: wild wild west
Rep Power: 0
Quote
[hr]Originally posted by: 01EXtc
YES these are fully reclinable. heres what i mean by "plates". the only real problem you run into when installing seats is where the mounting holes are on the seats and where they were on our factory seats. i simply made this plate from a 3/16" piece of steel and made holes to match up on the tenzo, and then i found out where the holes were on my factory seat, simple as that.
lucas norman[hr]
[hr]Originally posted by: 01EXtc
YES these are fully reclinable. heres what i mean by "plates". the only real problem you run into when installing seats is where the mounting holes are on the seats and where they were on our factory seats. i simply made this plate from a 3/16" piece of steel and made holes to match up on the tenzo, and then i found out where the holes were on my factory seat, simple as that.
lucas norman[hr]
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
h4ldol
7th Generation Civic 2001 - 2005
5
Apr 24, 2017 08:16 PM
PunX
Mechanical Problems/Vehicle Issues and Fix-it Forum
4
Sep 23, 2015 10:45 PM
