Rep Power: 0

I'm about to install my reverse indiglo gauges and was wondering where's the best spot to ground the gauges? I know the DIY says to ground them to the screw at the bottom of the cluster, but I was wondering if I could just ground them to the black wire on the factory cluster harness? Any info would be helpful. Thanks

 
Rep Power: 0

yes you can do that. i have mines wire the to harness and no problems so far.

 
Rep Power: 433

thats the best place [IMG]i/expressions/face-icon-small-smile.gif[/IMG][IMG]i/expressions/face-icon-small-smile.gif[/IMG]

 
Rep Power: 0

Thats were I have mine...on the screw....but when it gets cold, it breaks the ground....so I'm moving it [IMG]i/expressions/face-icon-small-smile.gif[/IMG]....its funny actually, car warms up, I touch where it grounds, it lights up [IMG]i/expressions/face-icon-small-smile.gif[/IMG]! If its cold, no matter how much banging on do on the spot, it wont light up [IMG]i/expressions/face-icon-small-tongue.gif[/IMG]. The plastic has to be warm.

Matt

 
Rep Power: 0

Just ground it to the black wire in the wire harness, get soem wire taps from radio shock and it will work fine...

 
Rep Power: 0

Thanks for the responses. The black wire on the wiring harness does seem like a better spot to gound the wire. Thanks