so what other materials do I need?
Thread Starter
Registered!!
Joined: Apr 2002
Posts: 176
Likes: 0
From: Raleigh, NC
Rep Power: 0 
so what other materials do I need?
okay. here is my list of materials that I am going to buy
- alpine spr-176a 6.5 component speakers
- alpine spr-694a 6x9 rear speakers
- alpine mrvfF340 600 WATT amp
- rockford fosgate rp1729-c 4 gauge amp kit
what other materials do I need???
- alpine spr-176a 6.5 component speakers
- alpine spr-694a 6x9 rear speakers
- alpine mrvfF340 600 WATT amp
- rockford fosgate rp1729-c 4 gauge amp kit
what other materials do I need???
Registered!!
Joined: Mar 2002
Posts: 4,344
Likes: 0
From: bay area, california
Rep Power: 337 line out converter if your amplifiers do not have hi level inputs.
spacers for your front speakers, you can make them yourself out of wood.
might have to do some work to the pods to get the tweeters to fit.
the rest is labor.
spacers for your front speakers, you can make them yourself out of wood.
might have to do some work to the pods to get the tweeters to fit.
the rest is labor.
Thread Starter
Registered!!
Joined: Apr 2002
Posts: 176
Likes: 0
From: Raleigh, NC
Rep Power: 0
Quote
[hr]Originally posted by: WhiteRabbit
line out converter if your amplifiers do not have hi level inputs.
spacers for your front speakers, you can make them yourself out of wood.
might have to do some work to the pods to get the tweeters to fit.
the rest is labor.[hr]
[hr]Originally posted by: WhiteRabbit
line out converter if your amplifiers do not have hi level inputs.
spacers for your front speakers, you can make them yourself out of wood.
might have to do some work to the pods to get the tweeters to fit.
the rest is labor.[hr]
• 12V RMS Continuous Power 4ohm; Stereo (0.08% THD) 40Wx2 2ohm; Stereo (0.3% THD) 75x2 Bridged 4ohm; (0.3% THD) 150x1
•14.4V RMS Continuous Power 4ohm; Stereo (0.08% THD) 60Wx2 2ohm; Stereo (0.3% THD) 100x2 Bridged 4ohm; (0.3% THD) 200x1
• S/N Ratio 100dBA
• Frequency Response: 10-50kHz
• 12dB HP/LP Crossover
(50-200Hz)
•Speaker Level Input
• Subsonic Filter (15Hz)
• Extra Large Gold Plated Terminals with Wire Insert Capability
• Top Panel Power LED
• 4 Volt Input Capability
• Continuously Adjustable Crossovers
• DC Straight, STAR Topology
• DC-DC/PWM MOSFET Power Supply
Thread Starter
Registered!!
Joined: Apr 2002
Posts: 176
Likes: 0
From: Raleigh, NC
Rep Power: 0 I'm going to add an aftermarket after those parts
reason being, I want to get a really really nice HU
but it's gonna cost me a bit, lets think about that later
I posted the specs
does that amp have the high level inputs necessary?
and where can I get spacers??
will those universal scosche 6.5 and 6x9 adapters be sufficient when installing the aftermarket speakers?
or will I still need spacers?
reason being, I want to get a really really nice HU
but it's gonna cost me a bit, lets think about that later
I posted the specs
does that amp have the high level inputs necessary?
and where can I get spacers??
will those universal scosche 6.5 and 6x9 adapters be sufficient when installing the aftermarket speakers?
or will I still need spacers?
Quote
[hr]Originally posted by: WhiteRabbit
copper.[hr]
[hr]Originally posted by: WhiteRabbit
Quote
[hr]Originally posted by: angjc3
what kind of wire am I looking for anyways?[hr]
[hr]Originally posted by: angjc3
what kind of wire am I looking for anyways?[hr]
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
