kenwood sub and boss amp
Thread Starter
Registered!!
Joined: Aug 2002
Posts: 53
Likes: 0
From: San Fracisco, California, US
Rep Power: 289 
kenwood sub and boss amp
I just got a 12 inch kenwood sub (kfc-w3003), and a boss amp (rev 555 300*2ch) at a garage sale. Im the guy that got that pioneer deh-4400 pioneer head unit. Now, i am totally clueless, and i need help on the installation. The pioneer has a weird subwoofer hookup, u can turn the rear rca otputs to sub outputs, but that in turn bridges the rear powered outputs of the headunit into a sub out. The sub is rated at 4ohm, and the amp is bridgeable. How in the world do i do this?
any help will be greatly appreciated.
any help will be greatly appreciated. 
i boogie for the raindrops
Joined: Oct 2001
Posts: 4,497
Likes: 1
From: Jackson, Mississippi
Rep Power: 0 wow... no offense, but you picked some crappy stuff to buy =), but no worries, i could afford only a BOSS amp for a loooong time, and believe me, its not 300w x2, those amps are soooo overrated
Thread Starter
Registered!!
Joined: Aug 2002
Posts: 53
Likes: 0
From: San Fracisco, California, US
Rep Power: 289 lol im not complainin the sub and amp together ran me 20 bux. This isnt a permanant thing just sorta spurr of the moment and i just couldnt say no for only 20 bux.
I'll try answer your question..
So, you're saying that if you set the rear channel's pre-amp outs as sub out (basically just a non fading LPF) then you lose the internal amp's rear channels? I say just hook up the amp to those channels and maybe use the amp's crossovers. I don' tknow anythign about the amp, but if it's stable at 4 ohms mono, then bridge those channels together and connect it to the amp. I'm not sure what else there is.
So, you're saying that if you set the rear channel's pre-amp outs as sub out (basically just a non fading LPF) then you lose the internal amp's rear channels? I say just hook up the amp to those channels and maybe use the amp's crossovers. I don' tknow anythign about the amp, but if it's stable at 4 ohms mono, then bridge those channels together and connect it to the amp. I'm not sure what else there is.
Thread Starter
Registered!!
Joined: Aug 2002
Posts: 53
Likes: 0
From: San Fracisco, California, US
Rep Power: 289 Ok i know the boss amp is crap, but thats all i have right now so for now im going to try and wire it. The amp is 2ohm sterro stable, meaning that u dont have to bridge it to get maximum power right? The amp itself has a pair of RCA ins. Now, if i connect both the left and right RCA plug it will be sending a signal to both the left and right channel right, so if i connect only the one kenwood sub to say the left channel id be missing half the signal. How do i connect the head unit amp and sub so i get max power, and all the signal?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
h4ldol
7th Generation Civic 2001 - 2005
5
Apr 24, 2017 08:16 PM
Mc7602
Electrical, Wiring, and In Car Entertainment
8
Sep 17, 2015 02:01 PM
