K24 block F/S
Thread Starter
Registered!!
iTrader: (1)
Joined: Apr 2003
Posts: 239
Likes: 0
From: maryland
Rep Power: 284 
K24 block F/S
Im looking to get rid the the K24 block ive had sitting around for a while. I decided that having my own place instead of living with the parents was more important than my swap that ive been working towards. It dosnt have a head on it which is perfect for those ppl looking to put the K20 head on. its a K24A1.
Found in 2002-2006 Honda CR-V
Displacement: 2,354 cc (143.6 cu in)
Bore and Stroke: 87 mm x 99 mm (3.43x3.90 inches)
Compression: 9.6:1
The downside is it needs to be resleeved and a piston head replace. I priced out the resleeve at 200 for the whole thing. most ppl will replace the piston heads anyway. The bottom end is fine and intacked. Anyone interested? Will let it go for cheap. Its taking up valuble room.
Local pick up, or buyer pays shipping. Thanks!
Found in 2002-2006 Honda CR-V
Displacement: 2,354 cc (143.6 cu in)
Bore and Stroke: 87 mm x 99 mm (3.43x3.90 inches)
Compression: 9.6:1
The downside is it needs to be resleeved and a piston head replace. I priced out the resleeve at 200 for the whole thing. most ppl will replace the piston heads anyway. The bottom end is fine and intacked. Anyone interested? Will let it go for cheap. Its taking up valuble room.
Local pick up, or buyer pays shipping. Thanks!
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
styles234
Cracked block early R18 Overheating
21
Nov 19, 2019 07:23 AM
MichaelLW
Fuel, Oil, Cleaners & Other Maintenance
2
Sep 14, 2015 07:15 AM
MamaBear2015
7th Generation Civic 2001 - 2005
2
Sep 7, 2015 06:00 PM
