got new job at a new motorsports shop!!! WIN motorsports is closed!!
Thread Starter
I just burnt my tongue
iTrader: (8)
Joined: Mar 2004
Posts: 4,990
Likes: 0
From: Chino Hills, CA
Rep Power: 319 
got new job at a new motorsports shop!!! WIN motorsports is closed!!
well basically as some of you know i worked at a motorsports shop here in LA but it seems as if the bastard korean owners (im korean so i can say it lol) decided to close down after sema...
well i quit before that happened because i just couldnt stand the owner...
well now my friend robby who used to run win motorsports was out of a job...talk about bad timing, because he just got his car stolen which he was assed out of $30k that was put into building that EK hatch...
well now with some good luck he was able to start back up another shop thanks to many great friends
it is now located in STi Motorsports...
we can do anything and everything...bring your friends and everyone you know because we will beat any prices and can get anything, you name it
i know a few of you from here that had already been previous customers and homies at win motorports well no mo shitty *** owner to deal with!
i might be holding a free bbq meet/potluck or something so keep a look out
Location:
http://maps.google.com/maps?q=5879+W...0.039945&hl=en
off of washington blvd and La Cienega in culver city
come on in im usually there from 10a to whenevers past 6...
this is not STi motorsports but but we work with them
and please all of you who were satisfied or dissatisfied at win come back cuz this place is so much better...homies get special hook ups...if you know what i mean
and if you're not sure ask russdogg, xtheenderx and temjinx2
few things we can do:
Wheels/tires
suspensions (coilovers, springs, shocks etc.)
suspension upgrades (sway bars, tie bars, strut bars, underbracing, etc)
custom exhausts (pinch or mandrel bent)
wheel alignments
general maintinence (oil, filters, brakes, fluids, etc)
any aftermarket parts
turbos
swaps (speciallizing in honda B and K series swaps)
parts installs
and pretty much any other thing you can think of
hell today russdogg came in and bought front/rear sway bars, rear tie bar, tires, tanabe underbody cross brace and he got it for cheap
so hit me up on my cell for anything
(909) 919-4315
well i quit before that happened because i just couldnt stand the owner...
well now my friend robby who used to run win motorsports was out of a job...talk about bad timing, because he just got his car stolen which he was assed out of $30k that was put into building that EK hatch...
well now with some good luck he was able to start back up another shop thanks to many great friends
it is now located in STi Motorsports...
we can do anything and everything...bring your friends and everyone you know because we will beat any prices and can get anything, you name it
i know a few of you from here that had already been previous customers and homies at win motorports well no mo shitty *** owner to deal with!
i might be holding a free bbq meet/potluck or something so keep a look out
Location:
http://maps.google.com/maps?q=5879+W...0.039945&hl=en
off of washington blvd and La Cienega in culver city
come on in im usually there from 10a to whenevers past 6...
this is not STi motorsports but but we work with them
and please all of you who were satisfied or dissatisfied at win come back cuz this place is so much better...homies get special hook ups...if you know what i mean
and if you're not sure ask russdogg, xtheenderx and temjinx2
few things we can do:
Wheels/tires
suspensions (coilovers, springs, shocks etc.)
suspension upgrades (sway bars, tie bars, strut bars, underbracing, etc)
custom exhausts (pinch or mandrel bent)
wheel alignments
general maintinence (oil, filters, brakes, fluids, etc)
any aftermarket parts
turbos
swaps (speciallizing in honda B and K series swaps)
parts installs
and pretty much any other thing you can think of
hell today russdogg came in and bought front/rear sway bars, rear tie bar, tires, tanabe underbody cross brace and he got it for cheap
so hit me up on my cell for anything
(909) 919-4315
Last edited by ragingSPAM; Nov 18, 2006 at 07:18 PM.
very awesome work 
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320 
ragingspam does good work. He's a cool guy too. If your new shop wasn't so far from cerritos. I'd bring my car in all the time. The work on my gsr is taking a lot longer then i thought it would.
Thread Starter
I just burnt my tongue
iTrader: (8)
Joined: Mar 2004
Posts: 4,990
Likes: 0
From: Chino Hills, CA
Rep Power: 319 the address is:
5879 Washington Blvd
Culver City, CA 90232
you can reach me at (909) 919-4315 which is my cell on weekdays between 10-6 or so for a quote on labor or prices
5879 Washington Blvd
Culver City, CA 90232
you can reach me at (909) 919-4315 which is my cell on weekdays between 10-6 or so for a quote on labor or prices
Thread Starter
I just burnt my tongue
iTrader: (8)
Joined: Mar 2004
Posts: 4,990
Likes: 0
From: Chino Hills, CA
Rep Power: 319 dunno about stainless lines yet but the turbo is around $2500 or so...i checked prices but nothing exact...i'll have to have my friend robby give a hks a call for the exact price on a turbo and also to find out how much stainless lines are...
the k&n filter is $40 or so for the tl
the k&n filter is $40 or so for the tl
That is not an ordinary rabbit tis the most foul cruel beast
iTrader: (1)
Joined: Jan 2004
Posts: 4,579
Likes: 0
From: California
Rep Power: 318 anyone there know how to put new gears in a holden monaro HSV? I just got 3.71's...need to find a place to install them that 'knows' or has done a holden before...
Registered!!
iTrader: (3)
Joined: Nov 2002
Posts: 622
Likes: 0
From: 626 Area, California, US
Rep Power: 0 dunno about stainless lines yet but the turbo is around $2500 or so...i checked prices but nothing exact...i'll have to have my friend robby give a hks a call for the exact price on a turbo and also to find out how much stainless lines are...
the k&n filter is $40 or so for the tl
the k&n filter is $40 or so for the tl
http://cgi.ebay.com/ebaymotors/K-N-A...spagenameZWDVW
This guy has it for $30, but $8 shipping. Still lower than $40 though. Don't mean to put you on the spot like that bro.
Let me know, thanks!
Last edited by KaOtIcCiViC; Nov 21, 2006 at 03:47 PM.
dunno about stainless lines yet but the turbo is around $2500 or so...i checked prices but nothing exact...i'll have to have my friend robby give a hks a call for the exact price on a turbo and also to find out how much stainless lines are...
the k&n filter is $40 or so for the tl
the k&n filter is $40 or so for the tl
Thread Starter
I just burnt my tongue
iTrader: (8)
Joined: Mar 2004
Posts: 4,990
Likes: 0
From: Chino Hills, CA
Rep Power: 319 oh werd...i forgot...pm me or just email me with questions...also dj if this shop thing is successful than i will most likley invest in a lifetime vendor membership
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
usajags84
6th Generation Civic 1996 - 2000
15
Aug 19, 2015 03:12 AM
Nigel Evans
Member's Rides
0
Jun 10, 2015 06:35 PM
