FS: BUY MY EX sways,lilput console 7'',led retro *updated 1-29-07
Thread Starter
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320 
FS: BUY MY EX sways,lilput console 7'',led retro *updated 1-29-07
Hi guys,
i'm going back to stock to sell the car. I just bought a gsr, so the vic is gonna go.
here are pics for the lazy
You can email me if my PM box gets full
TemjinX2@yahoo.com
I'm pretty firm on the prices since i'm selling it for less then 2/3 of what i paid.
updated 1-29-07
i have one more liliput bezel left. it needs to be resanded and painted. The dash fits a liliput 619 7'' screen.
asking $30
Teins are sold
RSX seats are sold
SPC camber kit sold
OEM replica spoiler = sold
I have led dash retrofit done by gearbox. The leds are white. I'm asking $60 total for everything. These leds are much brighter then stock, and gives your car a cleaner look.
everything works, just needs to be hooked up to a 12v source
the defrost icon doesnt work, the wire came lose...would need to be resoldered. The other two buttons work perfect.
I also have 04 front and rear sway bars. The front comes with brushings and brackets. The rear doesnt come with brackets. $20 for both.
i'm going back to stock to sell the car. I just bought a gsr, so the vic is gonna go.
here are pics for the lazy
You can email me if my PM box gets full
TemjinX2@yahoo.com
I'm pretty firm on the prices since i'm selling it for less then 2/3 of what i paid.
updated 1-29-07
i have one more liliput bezel left. it needs to be resanded and painted. The dash fits a liliput 619 7'' screen.
asking $30
Teins are sold
RSX seats are sold
SPC camber kit sold
OEM replica spoiler = sold
I have led dash retrofit done by gearbox. The leds are white. I'm asking $60 total for everything. These leds are much brighter then stock, and gives your car a cleaner look.
everything works, just needs to be hooked up to a 12v source
the defrost icon doesnt work, the wire came lose...would need to be resoldered. The other two buttons work perfect.
I also have 04 front and rear sway bars. The front comes with brushings and brackets. The rear doesnt come with brackets. $20 for both.
Last edited by TemjinX2; Jan 29, 2007 at 08:10 PM. Reason: Automerged Doublepost
Thread Starter
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320
Originally Posted by southpasdena
i will take the strut bar for sure for $56 since that is what i have in my pocket..plus random change..so how about like $58.50?
only if you come to cerritos to pick it up.
Thread Starter
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320
Originally Posted by crazyasian
just puttin up my dibs on the headlights if he doesnt sell them locally. let me know when u plan on shipping them cause i have the money ready to go.
not a problem..your one of the first in line...thought you had a valeo retrofit though? Or am i thinking of someone else?
Originally Posted by TemjinX2
not a problem..your one of the first in line...thought you had a valeo retrofit though? Or am i thinking of someone else?
Last edited by crazyasian; Sep 20, 2006 at 02:18 PM.
Registered!!
Joined: Aug 2005
Posts: 169
Likes: 0
From: 818, woodland hills
Rep Power: 0 
Originally Posted by TemjinX2
i'm keeping the rims,
but i might all part out my aero rear and side skirts. I need to keep the front since my front bumper is all scratched up.
but i might all part out my aero rear and side skirts. I need to keep the front since my front bumper is all scratched up.
Thread Starter
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320
Originally Posted by TuffVietta
just curious, what car are you thinkin' of gettin'?
i'm buyin a 94 gsr
Originally Posted by Ti71
Are the 01 top mounts for sale?
probably $30..let me make sure i can find them.
Last edited by TemjinX2; Sep 21, 2006 at 03:11 AM. Reason: Automerged Doublepost
Thread Starter
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320 Thanks guys for the comments. Sorry for the late replies. I just got my gsr on saturday so i was busy getting it registered and smoged. Plus finding a really dark area with no street lights is hard in the city.
All pics are taken with no flash to try to capture the amount of true light output as possible. It was done with a sony p150 5mp camera, which kinda sux for capturing natural light at night.
Here are some more hid pics
Some wall shots
Foreground lighting pics
As you can see there's not dead spots in front of the car. I was really happy with the width of the beam and its foreground lighting.
Pic taken within the car to give an idea how it looks like from inside
The lights shine blue from a distance and move white and then yellow as your get closer. This is the best setup since the yellow cuts through bad weather the best and you have the most light output. I added only one washer to make a little more blue. I didn't want to lose too much sharpness on the cut off with two.
I would keep these lights if they would fit on my integra, but i have to let them go.
All pics are taken with no flash to try to capture the amount of true light output as possible. It was done with a sony p150 5mp camera, which kinda sux for capturing natural light at night.
Here are some more hid pics
Some wall shots
Foreground lighting pics
As you can see there's not dead spots in front of the car. I was really happy with the width of the beam and its foreground lighting.
Pic taken within the car to give an idea how it looks like from inside
The lights shine blue from a distance and move white and then yellow as your get closer. This is the best setup since the yellow cuts through bad weather the best and you have the most light output. I added only one washer to make a little more blue. I didn't want to lose too much sharpness on the cut off with two.
I would keep these lights if they would fit on my integra, but i have to let them go.
Last edited by TemjinX2; Sep 25, 2006 at 03:09 AM.
Thread Starter
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320 mpokpo
When i was speaking of intensity, i wasn't really talking about light output. I was talking about how one seemed brighter then the other. i think it might have just been my bulbs. I bought used bulbs so one was a little more bluer then the other. The intensity looks the same now, the other one might have finally color shifted too.
They can light up all four lanes on the free way if i'm by myself and there's no street lighting. I bought some clear lens 3'' 240sx projectors. i was going to do a lens swap to experiment a bit, before i decided on selling the headlights.
If you want them i'll ship them too you if you still want them. just give me a day or two to find a good box for them.
Originally Posted by crazyasian
hey u wouldnt have any foreground lighting pictures would u? are these the ones that u have problems with light intensity from the driver to the passenger side beams?
When i was speaking of intensity, i wasn't really talking about light output. I was talking about how one seemed brighter then the other. i think it might have just been my bulbs. I bought used bulbs so one was a little more bluer then the other. The intensity looks the same now, the other one might have finally color shifted too.
They can light up all four lanes on the free way if i'm by myself and there's no street lighting. I bought some clear lens 3'' 240sx projectors. i was going to do a lens swap to experiment a bit, before i decided on selling the headlights.
If you want them i'll ship them too you if you still want them. just give me a day or two to find a good box for them.
Last edited by TemjinX2; Sep 25, 2006 at 03:16 AM. Reason: Automerged Doublepost
any ideas y it flares up so high on the passenger side? that beam pattern is wierd. i guess its b.c im used to lookin at sharp distinct cut offs not the beam pattern like yours.
Thread Starter
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320 i think it flares a little more because i didn't black out the stock bottom reflector that's chrome in the stock headlight. The extra glare does light up signs a little better. I did lose some sharpness because of the washer mod. The frensel len does kill a lot of the sharpness. If you want, you can buy the the 240sx clear lens for $50.
Thread Starter
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320 sorry i haven't really been looking. i just took off my hids for crazyasian. i dont have the ball bearings with them...there just straight top mounts since i thought i needed them for my tein basics. it turns out i didnt so there still factory sealed from honda.
Alex, your headlights are going to go out today via UPS insured. i'll give you the tracking # when i come back from work 6pm pst.
Alex, your headlights are going to go out today via UPS insured. i'll give you the tracking # when i come back from work 6pm pst.
Last edited by TemjinX2; Sep 27, 2006 at 01:40 AM. Reason: Automerged Doublepost
ey temjin, still trying to get a hold of ya. intrested on teins.
TEMJIN, WHERE ARE YOU!!!!! emailed and pm. hehe or better yet call me at 213-675-0353.
TEMJIN, WHERE ARE YOU!!!!! emailed and pm. hehe or better yet call me at 213-675-0353.
Last edited by ohsnapsjay08; Oct 6, 2006 at 06:46 PM.
Thread Starter
Registered!!
iTrader: (11)
Joined: Nov 2003
Posts: 4,576
Likes: 0
From: Lakewood, 562
Rep Power: 320 sorry for the late replies guys. I've been working a lot. I'm taking the basics off this saturday. if you can come to my buddies house to pick them up that would be great. All PM's replied. I'll sell my rears and sides with the teins all together for $850 if you can pick them up this weekend.
