Rep Power: 0

since the 04 vp's don't have sway bars from the factory how would you mount an aftermarket one? THanks

 
Rep Power: 424

You need to buy the Progress Swaybar mounting kit.

 
Rep Power: 0

it sounds like more trouble than its worth

 
Rep Power: 380

That depends on if you want the car to handle better or not....

 
Rep Power: 0

my friend that works at progress just told me last weekend that the stock 05 civics are coming out with a 25mm rear sway!!! just a little FYI..

 
Rep Power: 273

Not necessarily, if you wish to autocross the car and want your car to do more oversteer or less oversteer, then by having the rear sway bar you can tune it to do so. I've seen the progressive rear sway bar mounting kit, I just don't like the way the end links mount. I would just assume buy lower control arms that already have the mounts on them, then drill the holes for the mounts on the cross frame and thread them. for a factory fit and finish.

 
Rep Power: 0

I have stock sway bars front and rear, i suppose they do some good, but yeah I would do both ends if I were you I think I've seen the Progress one referred to above, just do it.

 
Rep Power: 424

Somehow, I highly doubt that.
2 reasons... 1. The RSX-S only has a 21mm bar, why would they put more reas bias in the Civic if the RSX is supposed to be the sportier car?
2. A 1" bar in the rear with the stock springs would be a deathtrap to the average granny driver

Someones full of it, or they went back to the 25mm FRONT bar.

 
Rep Power: 0

yeah, im sorry, it went to 21mm.. so progress is making the 25mm.. my bad, got the numbers screwed up..