Rep Power: 0

Just like the question said, I'm wondering where I can get an 01 upper mount for my car? I have an 03. The reason why I'm looking for the 01 is for the B+G coilovers. I don't have them yet but I wanna get them.

 
Rep Power: 359

Try here and the prices are really good
Also there are diagrams to reference to.

http://www.hondaautomotiveparts.com/...catdisplay.jsp

 
Rep Power: 0

Thanks!

 
Rep Power: 0

For clarification, is the number 9 in the illustration is all we need?

 
Rep Power: 0

hmmm....I took a while looking at it. I thought it was 10? Not too sure either. I'd just grab 8, 9, and 10.

 
Rep Power: 0

If I recalled correctly from reading one of the threads, you only need #9.

 
Rep Power: 311

#9 is the strut bearing...

 
Rep Power: 0

Yeah,but is that all we need?

 
Rep Power: 0

Looking at the diagram(sp), it seems right if we get 8, 9, +10. Like I said earlier too, I'm not the sure about it.

 
Rep Power: 0

Which parts do we need then?

I am ordering a set of 01 uppermounts because I have terrible clanking from my Ground Control. Will the 01 uppermounts fix this?

 
Rep Power: 0

I don't know about Ground Control. I do know that with the B+G, its a flush fit with the 01 upper mount. With the 02+, it fits, but its just not a flush fit like the 01. I the TEIN coilovers are the same too. If you look at their website, its updated saying that 02+ will need 01 upper mount.

 
Rep Power: 0

Im gonna order the 01 uppermounts as soon as I find out which parts I need.

 
Rep Power: 0

I got my uppermounts and bushings from an 01 for my 04 from Honda 90$

 
Rep Power: 0

From the illustration above, did you just get the 9 and 10?

Strut Mount is $30.92/each (number 9 in pic above)
Strut Bearing is $13.45/each (number 10 in pic above)

 
Rep Power: 0

Yea it was both, the whole upper piece got replaced. Tein emailed me the part numebers, which I no longer have sorry....

 
Rep Power: 0

Ahh ic. Regarding the p/n, its okay. I will order it through a website where nio p/n is needed.

 
Rep Power: 0

so parts 9 and 10?

 
Rep Power: 0

Here is a list of parts for Teins (& B&G) to fit 02+, from an old thread:

Front:
------
369032 Part 9 (BEARING, FR. SHOCK ABSORBER MOUNT) $13.98 X 2
369034 Part 10 (MOUNT, R. FR.) $23.45 X 1
369034 Part 11 (MOUNT, L. FR.) $23.45 X 1

Rear:
-----
36557 Part 1 (WASHER, SHOCK ABSORBER MOUNTING) $0.27 X 2
22692 Part 2 (COLLAR, SHOCK ABSORBER MOUNT (DUFFY STEEL PARTS) ) $0.45 X 2
369095 Part 8 (RUBBER, SHOCK ABSORBER MOUNTING) $4.74 X 2
369097 Part 9 (BASE, RR. SHOCK ABSORBER MOUNTING) $18.62 X 2
369099 Part 10 (AL, SHOCK ABSORBER MOUNTING) $3.80 X 2
369101 Part 11 (PLATE, SHOCK ABSORBER MOUNT) $1.79 X 2
369103 Part 12 (RUBBER, RR. SPRING MOUNTING) $9.71 X 2
369105 Part 13 (COVER, RR. DUST) $7.22 X 2
369109 Part 15 (PLATE, BUMP STOP) $2.15 X 2

However, majority of later posts said you don't need to replace rear oem parts, guess this is just optional. Hope this helps.

 
Rep Power: 0

Thanks for the clarification obguam. I searched a bunch of old threads also and just couldn't find it. Good find.

 
Rep Power: 0

I guess I'll just order 9,10, and 11 even tho I have Ground Control. Hopefully it stops the clanking.

 
Rep Power: 0

Thanks, it did helped a lot for most of us.

 
Rep Power: 0

Ok guys, I just placed my order for a set of B&G's thru Jeff. Now I'm facing the question of, should I get the 01 upper mount? I know it's not necessary, but what you you guys think with the 02+?