Omni Power Full Coil-over Setup - Top Quality!!
Thread Starter
Registered!!
iTrader: (93)
Joined: Oct 2001
Posts: 1,243
Likes: 0
From: California, US
Rep Power: 0 
Omni Power Full Coil-over Setup - Top Quality!! 
LOCALS PLEASE STOP BY AND PICK UP A SET!!
When manufacturing a sophisticated suspension system there are many aspects that need to be considered to achieve extraordinary results. After exhausting efforts we feel that we have produced the ultimate coilover system.
We not only wanted a system that performed well on the track but also could be driven on the street. This is not as easy as it may seem, however we feel that we have achieved the perfect combination! Using many of the technologies found in Porsche 911 GT2/GT3 coilovers, we carefully configured bump and rebound settings for each specific application to produce optimum driving dynamics. We used spring (F=10K - 560 ft/lbs & R=10K – 560 ft/lbs) and damper rates that yield exceptional handling characteristics coupled with unsurpassed street drivability. THe front and rear springs can be switched.
Our coilovers can be raised or lowered, up to 4”, from two separate positions which allows the user to raise or lower their vehicle without affecting spring preload or damper stroke length. We incorporated large 46mm pistons along with 20mm shafts which we found far superior to typical smaller piston/shaft coilovers. By using large 46mm pistons we were able to greatly reduce the stroke length, while still moving the same amount of fluid, resulting in unprecedented efficiency. All coilover systems include high grade aluminum pillow mounts further enhancing overall control. We used CNC Wound SAE 9254 Racing Springs which were found to be the longest lasting spring on the market that showed no tendencies to sag.
So whether you are looking for a great track set up or you need a suspension that adapts to public roads, you have found the right coilover. Omni-Power, Designed and manufactured for customers who demand the very best!
- 46 mm Piston Size, Resulting In Superb Overall Control.
- 20 mm Shaft Designed To Withstand Both Track Abuse As Well As Road Imperfections.
- CNC Wound SAE 9254 Super High Quality Springs.
- Extensive Research And Development Went In To Choosing Precisely Matched
- Spring & Damper Rates Specific To Each Application. The Result Is Outstanding
- Ride Quality & Incredible Handling Characteristics!
Price: $749 plus S/HCall us at 909-982-4927 to order
Locals can stop by and pick-up!!
YOU CAN ALSO ORDER ONLINE: www.robearracing.com
Thanks
www.robearracing.com
Last edited by RobearRacing; Aug 11, 2004 at 08:39 PM.
Thread Starter
Registered!!
iTrader: (93)
Joined: Oct 2001
Posts: 1,243
Likes: 0
From: California, US
Rep Power: 0
Originally Posted by VTECTypeR
Dam these are a bit stiff. Im sure it would be good on a track but on streets it wouldnt be so good.
Registered!!
Joined: May 2002
Posts: 323
Likes: 0
From: Victoria, British Columbia, Canada
Rep Power: 0
Originally Posted by RobearRacing
Thanks for the 1st order!
That was very fast! I am positive the 7thgen community will love these!
That was very fast! I am positive the 7thgen community will love these!
Thread Starter
Registered!!
iTrader: (93)
Joined: Oct 2001
Posts: 1,243
Likes: 0
From: California, US
Rep Power: 0
Originally Posted by tamazoid
Do you ship to Canada? Because I can't find the option for it... Thanks!
Just call us up, and we can discuss payment options.
Originally Posted by Da1lyDr1ver
these look VERY similar to the Hayames...
I also want to point out. We offer a full warranty on these, so no worries, you are dealing with a reputable company!
Any tech questions, please email (do not PM) to me.
Thanks!
Rob
Registered!!
iTrader: (18)
Joined: May 2002
Posts: 2,492
Likes: 0
From: San Francisco/Berkeley, California, US
Rep Power: 0
Originally Posted by abmerop18
what post? what question? haha pwned 
seriously, was it a bad question or something? I thought it was very reasonable.
Thread Starter
Registered!!
iTrader: (93)
Joined: Oct 2001
Posts: 1,243
Likes: 0
From: California, US
Rep Power: 0
Originally Posted by reytito
rob, what year 7thgen was the installation done on? i'm asking for the 03+ civics...
Originally Posted by wonderz
Hm... how does these compare to Tein, B&G, and JIC full coilovers?
and where in cali are you located for pick up?
Thanks
and where in cali are you located for pick up?
Thanks
But I can say that these Omni Coil-overs do offer the same quality and proven R&D that customers have grown to expect now-a-days.
We are located in Upland, Ca about 50 miles south of LA
He can only tell us white people apart by the tone of our skin.
iTrader: (6)
Joined: Feb 2003
Posts: 1,563
Likes: 0
From: Columbus, Ohio, USA
Rep Power: 0
Originally Posted by RobearRacing
We have tested on all years except 04, which we dont see any problem.
dont be offended by the questions, i'm just clearing things up, cuz i think these look kicka$$ and am more than interested...
Thread Starter
Registered!!
iTrader: (93)
Joined: Oct 2001
Posts: 1,243
Likes: 0
From: California, US
Rep Power: 0
Originally Posted by reytito
so the coilovers accomodate for the difference in bolt sizes between the 02's and 03's? meaning a separate model for the 01, 02's? cuz i dont see how one model can fit both setups.
dont be offended by the questions, i'm just clearing things up, cuz i think these look kicka$$ and am more than interested...
dont be offended by the questions, i'm just clearing things up, cuz i think these look kicka$$ and am more than interested...
The arm is inveretd so you must put the bolt in upside down for this to work correctly.
ive been reading up on the omni powers from honda tech... and looks like this is what im going to end up going with... just give me a couple weeks and i'll get right back to ya rob...
Registered!!
iTrader: (15)
Joined: Feb 2003
Posts: 2,338
Likes: 0
From: Elk Grove/Sacramento/Davis, California, US
Rep Power: 0 Wow they looks nice. Do these come with a warranty? (ie: if the shocks blow, how would i go about for replacements?) If they're not lifetime warrantied, about how much would replacement shocks cost?
THanks
THanks
I hope they last. There are few of us who've had bad experiences with new products so we'll see.
I'll say they do look exactly like Hayame V2s without suggesting anything negative based on looks. The only difference I see is that the front springs are 10kg while Hayames are 8kg. That could be better since I was getting way too much oversteer with the Hayames (along with the rest of my suspension mods, mind you). I'm pretty sure people will like the go-kart feel of the spring rates Omni offers.
Oh yeah, to help with wonderz question, these are stiffer than entry model Teins, B&G S3s, and the spring rate compares closer to JIC. Again, they are a bit stiffer in the front than JICs. They do share the same spring rate as the Zeal V6 (for DC5s).
I'll say they do look exactly like Hayame V2s without suggesting anything negative based on looks. The only difference I see is that the front springs are 10kg while Hayames are 8kg. That could be better since I was getting way too much oversteer with the Hayames (along with the rest of my suspension mods, mind you). I'm pretty sure people will like the go-kart feel of the spring rates Omni offers.
Oh yeah, to help with wonderz question, these are stiffer than entry model Teins, B&G S3s, and the spring rate compares closer to JIC. Again, they are a bit stiffer in the front than JICs. They do share the same spring rate as the Zeal V6 (for DC5s).
Last edited by SlammedBlueEM2; Aug 24, 2004 at 08:19 PM.
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 I want to know about a group buy as well, in about a month and a half I will get some FOR SURE when I pay my mom off. I have been reviewing everything, and these sound good, especially with the camber kit. I like the go-kart feel part. Group Buy info? Please
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Touge
Ottawa
0
May 23, 2015 05:39 AM
