Rep Power: 0

Here is what I have priced out so far.

Turbo
Manifold
Intercooler
Intercooler piping
Missing Link
BOV
SF fuel System
Boost Gauge
Turbo Timer
Oil Lines
Down Pipe

 
Rep Power: 0

Intake piping?

 
Rep Power: 0

looks like u got it all.

 
Rep Power: 0

It would help to have a gasket for the return line off the turbo but you could just make one with gasket maker. Also you will need oil pan fittings for your return line and a T fitting for the feed line from the oil pressure sensor location. Do you have silicone couplers and clamps?

Good luck bro.

 
Rep Power: 607

like dober said, gaskets........ OEM exhaust manifold gasket, T3 inlet gasket (if using T3), oil return gasket, oil pan fitting, vaccuum lines, fittings for oil feed line, high temp silicone, silicone couplers and clamps, get a couple ft. of 5/16th's fuel line, and some gauges (a/f, boost, EGT, oil pressure).

and what are you doing for a wastegate ?

 
Rep Power: 812

Did you port match the exhaust mani gasket and header to match the head ports? If not, see my DIY.