Rep Power: 0

OK I have been thinking about this for the whole day today and I need your guys/girls help. Should I buy the SF fuel system or should I do a return fuel line? In the long run I plan to get a Turbo Cam, and Pistons, rods.

 
Rep Power: 0

get a fuel system..

 
Rep Power: 298

depending on the kind of numbers you want to make in the long run you probably will need the return set up(if your wanting to go higher than 300hp)

 
Rep Power: 299

I can get you the fuel system no problem-- just let me know. I am an authorized SF dealer.

Eddie

 
Rep Power: 0

what's the price???

 
Rep Power: 0

SF Fuel System is $600

 
Rep Power: 0

correct me if i am wrong but isn't the sf fuel system just an inline fuel pump attached to a vortech fmu.

 
Rep Power: 0

not sure kinda looks that way.

 
Rep Power: 0

it is a inline fuel pump connected to a fmu, htownboy can tell you how exacly it works, but it simulates a return line fuel system, the little "piston" inside the fmu acts as a falve to let more fuel to be pushed into the engine by the extra fuel pump, the valve is controled by vac/boost pressure, if your wanting big numbers i would go return, if your planing to run no more than 12psi i would go with sf and alcy injection, it realy depend on your needs, me personaly i dont plan on running no more than 5-6lbs, ive been thinking of custome fabricating one of those sf kits for myself, it would be way cheaper than 600 bones,

 
Rep Power: 299

I got the SF sysemt for 550

 
Rep Power: 0

how fast can u get an sf system to me for?

 
Rep Power: 0

IMO I'd go return. It costs about the same and gives you a much better system to start off with. Once someone comfirms the injector theory you will be set.

 
Rep Power: 0

True dober but someone needs to write up a DIY Fuel return system..

 
Rep Power: 299

I can have it to you in 1-3 weeks. I can make sure of that too now.

Eddie

 
Rep Power: 0

What needs to be done:

- Modify fuel rail to accept fuel return line
- Upgrade stock fuel pump located in the gas tank
- Bypass FPR in the gas tank
- Run return line back to tank from modified fuel rail
- Use aftermarket FPR (I recommend Aeromotive) and set to stock fuel pressure


opto_isolator can probably offer you a more detailed DIY but this is the basics. If you are not mechanically inclined or don't feel comfortable with doing it yourself take your car somewhere and get an estimate. This process is not a big deal for a true mechanic.

 
Rep Power: 0

I am not that mechaniclly inclined but with my 2 Buddys that always help me with every project that I do to the car. IE Nitrous install, dual purge, VAFC II, Ported Head..

 
Rep Power: 0

yep, that is it...that is all that you have to do..and i will be doing this very soon for my custom turbo setup...i just sold my sf kit and i am almost done piecing my custom setup together...and i am getting all my stuff for my return fuel conversion from dober...