FS/MUST SELL: HPI Super Nitro!
Thread Starter
§C§H§O§C§O§B§O
iTrader: (6)
Joined: May 2003
Posts: 1,808
Likes: 0
From: San Diego
Rep Power: 0 
FS/MUST SELL: HPI Super Nitro!
Hey guys, I'm sellin my HPI super nitro RS4 with the Dodge Viper body (yeah i know...i was newbie then)
anyway, i've pretty much modded it to its extent.
here's a list of the mods:
1. OXMAX .12 engine, with uprgades ~.75 horsepower! top speed ~65 mph! with pull start
2. C-Vec tuned pipe (annodized red)
3. Upgraded suspension by HPI with anodized cap and springs (forgot what these were called...super shocks or something?)
4. Carbon fiber dash, and shock mounts and other carbon fiber parts
5. Aluminum rear gear brace and other aluminum parts
6. Aluminum pullies (full set, annodized purple)
7. Aluminum brake rotor, and brake pad upgrades
8. Carbon fiber rear y-brace
9. Odonell .15 rod upgrade
10. Odonell heat sink (red) got zip ties up top to prevent scratching if car flips
11. Aluminum fuel filter
12. Upgrade lower control arms (front and rear) to fiberglass
13. 2-speed transmission with upgraded clutch and clutch bell
14. upgraded cirrus cervos, stock cervos included
15. clear cirrus cs-80 cervo
and i still have the stock HPI engine, the .15 but the heat sink is ruined, so you'll need a new heat sink to make that thing run again.
I painted the body the exact same way as on the box
I don't have a digicam that works so the pics are take from some1 else, but my car looks identical, so no worries bout that.
anyway, i've pretty much modded it to its extent.
here's a list of the mods:
1. OXMAX .12 engine, with uprgades ~.75 horsepower! top speed ~65 mph! with pull start
2. C-Vec tuned pipe (annodized red)
3. Upgraded suspension by HPI with anodized cap and springs (forgot what these were called...super shocks or something?)
4. Carbon fiber dash, and shock mounts and other carbon fiber parts
5. Aluminum rear gear brace and other aluminum parts
6. Aluminum pullies (full set, annodized purple)
7. Aluminum brake rotor, and brake pad upgrades
8. Carbon fiber rear y-brace
9. Odonell .15 rod upgrade
10. Odonell heat sink (red) got zip ties up top to prevent scratching if car flips
11. Aluminum fuel filter
12. Upgrade lower control arms (front and rear) to fiberglass
13. 2-speed transmission with upgraded clutch and clutch bell
14. upgraded cirrus cervos, stock cervos included
15. clear cirrus cs-80 cervo
and i still have the stock HPI engine, the .15 but the heat sink is ruined, so you'll need a new heat sink to make that thing run again.
I painted the body the exact same way as on the box
I don't have a digicam that works so the pics are take from some1 else, but my car looks identical, so no worries bout that.
Last edited by chocobo15_2000; Mar 5, 2004 at 08:24 PM.
Thread Starter
§C§H§O§C§O§B§O
iTrader: (6)
Joined: May 2003
Posts: 1,808
Likes: 0
From: San Diego
Rep Power: 0 another view of another car, mine looks EXACTLY like these, but diff colored stuff. Only diff. in this pic is my tuned pipe is like the one in the other pic.
hope this helps anyone, cause there is no way i can post up pics... >_<
hope this helps anyone, cause there is no way i can post up pics... >_<
Last edited by chocobo15_2000; Mar 5, 2004 at 06:44 PM.
Thread Starter
§C§H§O§C§O§B§O
iTrader: (6)
Joined: May 2003
Posts: 1,808
Likes: 0
From: San Diego
Rep Power: 0 i'm tryin to get around $300-$400 let me know guys, i've spent WAY more than 1000$ on this, so plz, if you're serious about his kinda stuff...you'll know this isn't just some toy.
Thread Starter
§C§H§O§C§O§B§O
iTrader: (6)
Joined: May 2003
Posts: 1,808
Likes: 0
From: San Diego
Rep Power: 0 alrighty, i got pics now, too big to post though, if you want to see actual pics, email me b3chen@ucsd.edu
. Good luck 
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
