K20A3 motor for sale
Thread Starter
Registered!!
Joined: Jun 2003
Posts: 37
Likes: 0
From: Winston-Salem
Rep Power: 0 
K20A3 motor for sale
K20A3 from my 2002 Civic Si:
Removed from my street car (I installed a K20A3). 14,000 miles. In PERFECT condition. Never raced, never abused. Always fed 93 octane gas. Oil and filter changed at 5 & 10K miles. Complete with throttle body, wiring harness, exhaust header and catalytic converter and ECU. Transmission NOT included.
In Winston-Salem, NC.
Asking $1,800.00
Removed from my street car (I installed a K20A3). 14,000 miles. In PERFECT condition. Never raced, never abused. Always fed 93 octane gas. Oil and filter changed at 5 & 10K miles. Complete with throttle body, wiring harness, exhaust header and catalytic converter and ECU. Transmission NOT included.
In Winston-Salem, NC.
Asking $1,800.00
Thread Starter
Registered!!
Joined: Jun 2003
Posts: 37
Likes: 0
From: Winston-Salem
Rep Power: 0 It's from the Si. When I put the K20A2 Acura motor into my Si, I kept the "Honda" badged cover and put it on my A2 motor. Locating a tranny should be pretty easy and I could help you with that.
good deal but i just bought rims and coilovers 
Lowest NHBP coupe in San Francisco
Joined: Apr 2003
Posts: 880
Likes: 0
From: San Francisco *415*
Rep Power: 0 Re: K20A3 motor for sale
Originally posted by S800Racer
K20A3 from my 2002 Civic Si:
Removed from my street car (I installed a K20A3). 14,000 miles. In PERFECT condition. Never raced, never abused. Always fed 93 octane gas. Oil and filter changed at 5 & 10K miles. Complete with throttle body, wiring harness, exhaust header and catalytic converter and ECU. Transmission NOT included.
In Winston-Salem, NC.
Asking $1,800.00
K20A3 from my 2002 Civic Si:
Removed from my street car (I installed a K20A3). 14,000 miles. In PERFECT condition. Never raced, never abused. Always fed 93 octane gas. Oil and filter changed at 5 & 10K miles. Complete with throttle body, wiring harness, exhaust header and catalytic converter and ECU. Transmission NOT included.
In Winston-Salem, NC.
Asking $1,800.00
How much ship to 94132
Thread Starter
Registered!!
Joined: Jun 2003
Posts: 37
Likes: 0
From: Winston-Salem
Rep Power: 0 Originally posted by Em2Guy
come on man so sad. do u even know what u have? Look @ the IM
come on man so sad. do u even know what u have? Look @ the IM
When this motor was in my Si, I had AEM CAI, 2.25" mid-pipe & Hondata IM gasket. I never had it dynoed but those mods gave gains that you could feel and appreciate on the "butt dyno". It's a good motor looking for a good home.
Thread Starter
Registered!!
Joined: Jun 2003
Posts: 37
Likes: 0
From: Winston-Salem
Rep Power: 0 Re: Re: K20A3 motor for sale
Originally posted by JDM EM2
How much ship to 94132
How much ship to 94132
"Total shipment cost: $378.95
Quote Reference #: 059250
Please note that shipping from/to a residential location can greatly increase the cost of your shipment. When possible, you should try to ship from/to a commercial location or a terminal. By doing so, we can decrease the cost of your shipment to only $232.95. You can let your agent know when you call if you wish to switch to commercial or terminal shipping."
i was talking to nytrider sorry
Originally posted by S800Racer
Of course I know what I have - I did the swap myself. You are right about the intake manifold identifying what the motor is. RSX K20A3's have a different IM. The Si K20A3 and RSX-S K20A2 have the same IM.
When this motor was in my Si, I had AEM CAI, 2.25" mid-pipe & Hondata IM gasket. I never had it dynoed but those mods gave gains that you could feel and appreciate on the "butt dyno". It's a good motor looking for a good home.
Of course I know what I have - I did the swap myself. You are right about the intake manifold identifying what the motor is. RSX K20A3's have a different IM. The Si K20A3 and RSX-S K20A2 have the same IM.
When this motor was in my Si, I had AEM CAI, 2.25" mid-pipe & Hondata IM gasket. I never had it dynoed but those mods gave gains that you could feel and appreciate on the "butt dyno". It's a good motor looking for a good home.
Thread Starter
Registered!!
Joined: Jun 2003
Posts: 37
Likes: 0
From: Winston-Salem
Rep Power: 0 K20A3 - Now on ebay - new low price
I put my motor back on ebay with a low reserve -- $1,100.00. Can supply a 5 spd trans for an additional $700.00.
check it out at: http://cgi.ebay.com/ebaymotors/ws/eB...tem=7914758951
check it out at: http://cgi.ebay.com/ebaymotors/ws/eB...tem=7914758951
Thread Starter
Registered!!
Joined: Jun 2003
Posts: 37
Likes: 0
From: Winston-Salem
Rep Power: 0
Originally Posted by cdmx
should incude the tranny
Hindsight is 20/20 - If I had known that it would be hard to move my motor w/o tranny, I would never have sold the 6spd. That's right - 6spd. I swapped in an A2 motor and I decided to keep the 5spd b/c I don't run my car on the track or strip. I like the 5spd and felt that the 6spd would just be more shifting around town. I'm very happy with the 5spd and glad I kept it in the car. A friend of mine in Charlotte (Jack Harris at P1auto) wanted a 6spd so I sold it to him - big mistake. If I had kept the 6spd, I think the A3 motor would have sold quickly.
Maybe I need to buy a 6spd just to have a trans to sell with the motor!
Thread Starter
Registered!!
Joined: Jun 2003
Posts: 37
Likes: 0
From: Winston-Salem
Rep Power: 0 If my source for the trans will lower his price (I think he should, really), someone could end up getting the whole package for a great price. If anyone is SERIOUSLY interested, I could call him to try to negotiate a better deal.
Thread Starter
Registered!!
Joined: Jun 2003
Posts: 37
Likes: 0
From: Winston-Salem
Rep Power: 0 Jrock, try www.usatransport.com for a shipping quote. My zip code is 27106. Not sure what the weight would be. I do know the trans weighs about 80lbs. I don't know what the motor weighs - maybe 300?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
cizsak
Mechanical Problems/Vehicle Issues and Fix-it Forum
9
Jul 21, 2015 03:39 PM
