FS: OEM HID headlight parts
Thread Starter
Registered!!
iTrader: (2)
Joined: Feb 2004
Posts: 480
Likes: 0
From: Chicago
Rep Power: 0 
FS: OEM HID headlight parts
1 pair of QX4 Matsushita OEM xenon ballasts with igniters (powers 2 bulbs, D2R or D2S) $175. (bulbs in picture not included)

1 pair of 350Z Matsushita OEM xenon ballasts with integrated igniters (powers two bulbs D2R or D2S) $175.

1 pair of OEM 2003 EX Coupe headlights with Bi-xenon hella projectors installed. Does not include bulbs or ballasts. $400. (Custom job, one of a kind - high and low beam OEM xenon)

References available by request --- Ebay + HIDforum.com
If these items sell through the 7thgenwebsite (as always) I will give a small cash donation to the website. Thanks for looking.

1 pair of 350Z Matsushita OEM xenon ballasts with integrated igniters (powers two bulbs D2R or D2S) $175.

1 pair of OEM 2003 EX Coupe headlights with Bi-xenon hella projectors installed. Does not include bulbs or ballasts. $400. (Custom job, one of a kind - high and low beam OEM xenon)

References available by request --- Ebay + HIDforum.com
If these items sell through the 7thgenwebsite (as always) I will give a small cash donation to the website. Thanks for looking.
Thread Starter
Registered!!
iTrader: (2)
Joined: Feb 2004
Posts: 480
Likes: 0
From: Chicago
Rep Power: 0 
The ballasts are prettymuch unviersal. All the require is a 12v power source that can supply 12A. Each ballast has a + and a - wire to connect and an output with the big P32D plug on it that connects on your HID bulb.
It is possible to connect the HID ballast directly to the OEM H4 plug for power, but the safest way is to run a relay inline so you're not putting too much load on the OEM wiring. Use the low beam H4 contact to trigger the relay, and connect your power feed for the relay directly to the battery. If you've done car audio, or basically any sort of 'custom' electronics install, it's a breeze.
The ballast on the passenger side fits under the headlamp, and on the drivers side it will either need to be mounted behind the headlamp or in the big void up in the drivers front corner when the bumper is removed.
It is possible to connect the HID ballast directly to the OEM H4 plug for power, but the safest way is to run a relay inline so you're not putting too much load on the OEM wiring. Use the low beam H4 contact to trigger the relay, and connect your power feed for the relay directly to the battery. If you've done car audio, or basically any sort of 'custom' electronics install, it's a breeze.
The ballast on the passenger side fits under the headlamp, and on the drivers side it will either need to be mounted behind the headlamp or in the big void up in the drivers front corner when the bumper is removed.
Thread Starter
Registered!!
iTrader: (2)
Joined: Feb 2004
Posts: 480
Likes: 0
From: Chicago
Rep Power: 0 
I would like to sell the two ballasts with the igniters together. I wouldn't want to sell just the ballast or just the igniter, because then I would be left with one useless part. Both parts are required for them to work right.
Is that what you mean by as a whole?
Is that what you mean by as a whole?
Originally posted by A03
I would like to sell the two ballasts with the igniters together. I wouldn't want to sell just the ballast or just the igniter, because then I would be left with one useless part. Both parts are required for them to work right.
Is that what you mean by as a whole?
I would like to sell the two ballasts with the igniters together. I wouldn't want to sell just the ballast or just the igniter, because then I would be left with one useless part. Both parts are required for them to work right.
Is that what you mean by as a whole?
yes.. i currently have the nissan hid's up there
snow some how got into the igniter and froze and blew the igniter ..... 
hit me up in a PM .. maybe we can work something out...at trade... or whatever.
let me know thanks.
vin
Thread Starter
Registered!!
iTrader: (2)
Joined: Feb 2004
Posts: 480
Likes: 0
From: Chicago
Rep Power: 0 
I tried to PM you but your mailbox is full.
I would have no problem selling only one side (1ballast and 1igniter) but I could not split a ballast/igniter set. I don't want to be left with a ballast I cannot use, so they must go only as working sets. 87.50 for one, and still $10 to ship when you get an insured trackable package. If you're interest in the 1ballast 1igniter set, just let me know.
Thanks for your interest,
-A03
Also, what are these points all about? Are you given points just for posting?
I would have no problem selling only one side (1ballast and 1igniter) but I could not split a ballast/igniter set. I don't want to be left with a ballast I cannot use, so they must go only as working sets. 87.50 for one, and still $10 to ship when you get an insured trackable package. If you're interest in the 1ballast 1igniter set, just let me know.
Thanks for your interest,
-A03
Also, what are these points all about? Are you given points just for posting?
yes im interested in one side can u overnight or 2day air this? you have paypal?... sorry fixed the mail box.... PM me-
yeah points allow u to buy stuff... click forums then look for the point store link-
yeah points allow u to buy stuff... click forums then look for the point store link-
Last edited by OsOBooSTeD; Feb 3, 2004 at 12:08 AM.
Thread Starter
Registered!!
iTrader: (2)
Joined: Feb 2004
Posts: 480
Likes: 0
From: Chicago
Rep Power: 0 
One ballast sold - pending payment.
-----------------------------------------------
One QX4 ballast still available (87.50)
Both 350Z ballasts still available (175)
and the set of Civic Bi-xenon headlights still available.
-----------------------------------------------
One QX4 ballast still available (87.50)
Both 350Z ballasts still available (175)
and the set of Civic Bi-xenon headlights still available.
Last edited by A03; Feb 4, 2004 at 08:51 AM.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
stryder12
Archive - Parts for Sale
3
Jun 30, 2015 08:33 PM




