Rep Power: 0

Hey guys i was wondering whats your ride height settings on the tein coilovers. Like whats the measurement from the bottom of the coil or (sleeve?) to the locking perch?
Today i lowered the front so that it only has about 1/4 inch of visible sleeve left and the back about 1 inch visible and now the ride is hella bouncy, stiff, and feels like the rides a little loose. When i had it at its recommended measurment the ride was a better. But im just curious to know whats your guys measurements.

 
Rep Power: 0

oh btw i got the basics not the type SS... i would have bought the SS if i didnt have to pay for shipping charges. Guess there's a price to pay when you live in Hawaii.

 
Rep Power: 0

I'm on Tein basics I Have the front at 1" and the back 1.5"
Recommended settings are 1.4 F and 1.6 R. I have the back higher b/c when I put people in the back it sinks.

 
Rep Power: 528

How is it bouncy and stiff? I don't get it.

 
Rep Power: 0

by bounce it seems to travel more up and down and when it hits it's hard...

 
Rep Power: 0

DroppIN808
I saw the pic of the TEIN assembled in your gallery ,did you take off the whole assembly for the old bearing?? I see you left it attached to the upper mount. When I installed mine I took everything off and just used the upper mount with the 01 bearing and gold spring seat(in that order).