Rep Power: 0

I was wondering if anyone could post examples of the beam pattern for Angel eye projectors and maybe give me a short description of what I should be looking for. I just installed my lights yesterday and I am sure I need to adjust the beam pattern, but I am just not really sure what it should look like.

 
Rep Power: 0

What no one can help me on this. C'mon I am counting on you guys.

 
Rep Power: 334

I don't have aftermarket headlights... I wish i had those though.


Check with your DMV for local rules and what not. I think in my area, the headlight have to lower than 3 feet at the top of the beam. The way I checked was by facing the car against a wall, 4 feet away with the headlights on. Then I measured the top from the ground, to the top of the light on the wall.

 
Rep Power: 306

Well here's my beam pattern of the angel eyes with mtec's super white. Adjust them right and you can get good lighting.

 
Rep Power: 0

On my angel eyes i just adjusted the drivers side high beam. Here recently I couldn't see anything with them at night, so I got HID. Now I see everything!

 
Rep Power: 0

Hey JayFreazy, shouldn't you see the what seems to be a car at the end of the alley better. My beam pattern looks somewhat like this. But when I am driving down the street I notice that other car are admitting more light on the back of the car in front of them, then I am. I also notice thatwhen driving next to a wall a get light shining on it from the driver's side but not the pass. side. I see in your picture that you maybe getting the same thing on the fence. Is that true. DO you know how to fix it.
By the way thanks for the picture.