is it ok to CUT GOLDLINEs 1 COIL
Thread Starter
Registered!!
iTrader: (16)
Joined: Jul 2003
Posts: 938
Likes: 0
From: S.F.V so.california
Rep Power: 0 
is it ok to CUT GOLDLINEs 1 COIL
i have an 02" 4 door i didnt like the way my car SETTLED. my rear sits a bit lower in the back . i WANTED to know if it was coo to CUT the fRONT a coil or half down
Civic 4 Door
Hello,
Do you have the correct spring kit(p/n GPS-0107) on the vehicle? If so, the rear should actually sit slightly higher. As always, if your unhappy with the outcome please contact us in order to fix the problem. I wouldn't advise cutting coils though. Whether they're Gold Line or not.
Regards,
Jeff Schaid
Gold Line Coil Springs
877-671-9752
www.goldlineonline.com
Do you have the correct spring kit(p/n GPS-0107) on the vehicle? If so, the rear should actually sit slightly higher. As always, if your unhappy with the outcome please contact us in order to fix the problem. I wouldn't advise cutting coils though. Whether they're Gold Line or not.
Regards,
Jeff Schaid
Gold Line Coil Springs
877-671-9752
www.goldlineonline.com
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 417 

hey jeff whussup, nice to see you drop in from time to time..
ya i would make sure you have the right kit first. if not talk to jeff. they have great customer service. if they are the right springs you can either add spacers in the rear, cut a coil off the front or just get new springs (such as neuspeed
)
ya i would make sure you have the right kit first. if not talk to jeff. they have great customer service. if they are the right springs you can either add spacers in the rear, cut a coil off the front or just get new springs (such as neuspeed
) Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
h4ldol
7th Generation Civic 2001 - 2005
5
Apr 24, 2017 08:16 PM
Mc7602
Electrical, Wiring, and In Car Entertainment
8
Sep 17, 2015 02:01 PM
RSKtakR
Mechanical Problems/Vehicle Issues and Fix-it Forum
25
Sep 14, 2015 07:43 PM




