My car is up for sale (Willing to part out!)
Thread Starter
Registered!!
iTrader: (14)
Joined: Sep 2002
Posts: 2,781
Likes: 0
From: St.Thomas, Ontario, Canada
Rep Power: 0 
My car is up for sale (Willing to part out!)
NEW PRICE!! $12 500 for my car!
Finally decided to sell it, not driving it much at all since i have another vehicle. Its an 02 civic lx sedan 5 speed, fully loaded, 4 wheel ABS, pw, pl, phm, cruise, air, tilt. 77 000k with ext. warranty till may 2009!
Exterior: Blacked out headlights with 6500k hids with led turn signals, mugen front lip (not installed), jdm sides (very rare), 2004-2005 Acura 1.7 EL rear conversion (i'm the first and i think only to do it), tint.
Interior: blue and black Katzkin leather rear seats with matching blue leather door inserts, blue momo shift ****, boot, and ebrake and boot, 04 si sedan led cluster (says 45 000k on it), oem silver metallic panel kit, interior lights all changed to blue leds (thanks to Telly), Revo tecnica short shifter (cut another 1/2", shortest shifter ever!), brand new oem carpet mats (only used for Importfest)
Ice: Pioneer avh 6600 in dash touchscreen with matching Pioneer rouftmount screen with dome lights, Kicker components in the front, the trunk is all custom figerglassed with BMW M3 blue paint done by Fox's Autosound, 2 12' Cerwin Vega Vegas, with 2 Alpine V12 amps, 2 1 Farad Lightning Audio caps with digital readouts.
Engine: AEM V2 intake, installed last summer, HP header, magnaflow hi flo cat, magnaflow resinator, tanabe muffler, all piping is 2 1/4" stainless steel. )2 sensors were replaced with brand new ones with extended wires, passed emissions with flying colours obviously, Neuspeed oil cap, battery tie down, Optima yellow top battery.
Suspension: ground control coilovers, DC lower tie bar, Rsx type s rear sway bar, generic rear upper strut bar, Neuspeed front uppper strut bar, Ingalls adjustable camber kit.
Wheels: 04 si alloys with Bridgestone tires, 02 steelies with brand new Dunlop Graspic snows, 15".
Car runs amazing, ran a 15.902 last summer at Sparta, not bad for a non vtec 4 door with 35 lbs of sound deadening in the trunk, lol. Car is mint as most people on here know.
I'd like to get $13 500 for it without the audio, i'll sell the audio seperately, but if you really want it we can work something out.
Car also comes with VIS oem cf hood, flawless, used for shows. Last pic was taken with camera phone, and no you can't have my **** zus, lol.
***NOTE: Willing to part out! Mom shift ****, boot, ebrake, boot, rear leathers, neuspeed upper front strut bar, neuspeed oil cap, battery tie down, DC lower tie bar, all my audio, i have 2 mini reverse glo guages by AC Autotecnica with cluster bezel to hold them painted silver, also 02 lx 5 speed cluster with less than 70 000k on it, and polished rear upper strut bar.
https://www.civicforums.com/forums/3...done-pics.html
https://www.civicforums.com/forums/3...ighlight=Audio
Finally decided to sell it, not driving it much at all since i have another vehicle. Its an 02 civic lx sedan 5 speed, fully loaded, 4 wheel ABS, pw, pl, phm, cruise, air, tilt. 77 000k with ext. warranty till may 2009!
Exterior: Blacked out headlights with 6500k hids with led turn signals, mugen front lip (not installed), jdm sides (very rare), 2004-2005 Acura 1.7 EL rear conversion (i'm the first and i think only to do it), tint.
Interior: blue and black Katzkin leather rear seats with matching blue leather door inserts, blue momo shift ****, boot, and ebrake and boot, 04 si sedan led cluster (says 45 000k on it), oem silver metallic panel kit, interior lights all changed to blue leds (thanks to Telly), Revo tecnica short shifter (cut another 1/2", shortest shifter ever!), brand new oem carpet mats (only used for Importfest)
Ice: Pioneer avh 6600 in dash touchscreen with matching Pioneer rouftmount screen with dome lights, Kicker components in the front, the trunk is all custom figerglassed with BMW M3 blue paint done by Fox's Autosound, 2 12' Cerwin Vega Vegas, with 2 Alpine V12 amps, 2 1 Farad Lightning Audio caps with digital readouts.
Engine: AEM V2 intake, installed last summer, HP header, magnaflow hi flo cat, magnaflow resinator, tanabe muffler, all piping is 2 1/4" stainless steel. )2 sensors were replaced with brand new ones with extended wires, passed emissions with flying colours obviously, Neuspeed oil cap, battery tie down, Optima yellow top battery.
Suspension: ground control coilovers, DC lower tie bar, Rsx type s rear sway bar, generic rear upper strut bar, Neuspeed front uppper strut bar, Ingalls adjustable camber kit.
Wheels: 04 si alloys with Bridgestone tires, 02 steelies with brand new Dunlop Graspic snows, 15".
Car runs amazing, ran a 15.902 last summer at Sparta, not bad for a non vtec 4 door with 35 lbs of sound deadening in the trunk, lol. Car is mint as most people on here know.
I'd like to get $13 500 for it without the audio, i'll sell the audio seperately, but if you really want it we can work something out.
Car also comes with VIS oem cf hood, flawless, used for shows. Last pic was taken with camera phone, and no you can't have my **** zus, lol.
***NOTE: Willing to part out! Mom shift ****, boot, ebrake, boot, rear leathers, neuspeed upper front strut bar, neuspeed oil cap, battery tie down, DC lower tie bar, all my audio, i have 2 mini reverse glo guages by AC Autotecnica with cluster bezel to hold them painted silver, also 02 lx 5 speed cluster with less than 70 000k on it, and polished rear upper strut bar.
https://www.civicforums.com/forums/3...done-pics.html
https://www.civicforums.com/forums/3...ighlight=Audio
Last edited by APRboy; Feb 15, 2007 at 06:21 AM.
You Stay Classy, San Diego
Joined: Jun 2006
Posts: 1,383
Likes: 2
From: Chatham, Ontario, Canada
Rep Power: 256 Are u interrested in sellin the cf hood separate? What about interior? Also where did u get those wire looms or wutever they are in ur engine. That looks clean.
Last edited by jamis33; Feb 1, 2007 at 04:28 PM.
Thread Starter
Registered!!
iTrader: (14)
Joined: Sep 2002
Posts: 2,781
Likes: 0
From: St.Thomas, Ontario, Canada
Rep Power: 0 I am willing to sell the cf hood seperately, the interior also, and the wire loom i got from a local shop. Blkcivic, the EL bumper needs the tail lights and everything else, it needs new holes to be drilled into the frame cuz they don't line up with the civic's holes, and the bumper is straighter than ours up at the top where it meets the lights, cuz ours is rounder. I compared one day with BIG, R1Style, Boy_R_D, and Falcon one day at the acura dealership.
https://www.civicforums.com/forums/3...done-pics.html
https://www.civicforums.com/forums/3...done-pics.html
Last edited by APRboy; Feb 2, 2007 at 08:46 AM.
Thread Starter
Registered!!
iTrader: (14)
Joined: Sep 2002
Posts: 2,781
Likes: 0
From: St.Thomas, Ontario, Canada
Rep Power: 0 yeah the cf hood fits coupes also, and the interior, well the stock seats in the front are cloth, cuz i had racing seats in before to match the leather on the doors and back. And the back is a kit but it won't fit coupes.
Thread Starter
Registered!!
iTrader: (14)
Joined: Sep 2002
Posts: 2,781
Likes: 0
From: St.Thomas, Ontario, Canada
Rep Power: 0 short shifter and exhaust i'm leaving on the car for now, and the camber kit is going with the car,its probably on there good and would be a pain to get off especially now with the weather being -20. 95 gets rid of the neuspeed upper strut bar.
Thread Starter
Registered!!
iTrader: (14)
Joined: Sep 2002
Posts: 2,781
Likes: 0
From: St.Thomas, Ontario, Canada
Rep Power: 0 Pm's replied, lots and lots of interest, good stuff, now if someone could take my audio off my hands, i'll give them an insane deal, on my pioneer screens, indash and everything in my trunk!
Thread Starter
Registered!!
iTrader: (14)
Joined: Sep 2002
Posts: 2,781
Likes: 0
From: St.Thomas, Ontario, Canada
Rep Power: 0 I have the Pioneer indash all in one and a matching pioneer roofmount screen, i paid 1700 for the indash and 700 for the roofmount, i'll let both go for 1200, yes thats right, 1200, i just wanna get rid of my audio asap so i can get my car back to stock so i can sell it easier. let me know cuz i have someone else interested in both.
Thread Starter
Registered!!
iTrader: (14)
Joined: Sep 2002
Posts: 2,781
Likes: 0
From: St.Thomas, Ontario, Canada
Rep Power: 0 First $500 takes a VIS oem cf hood, like brand new!!! Fits just like oem, and no need to drill holes to make hood pins, i've had my car up past 180 for a 1/2 hour straight once and it didn't even flutter.
Thread Starter
Registered!!
iTrader: (14)
Joined: Sep 2002
Posts: 2,781
Likes: 0
From: St.Thomas, Ontario, Canada
Rep Power: 0 thats an old pic, i don't have the rims and projectors anymore. just 15" si's with blacked out headlights. As for my 02 cluster, i'll get rid of that for 70 bucks.
Thread Starter
Registered!!
iTrader: (14)
Joined: Sep 2002
Posts: 2,781
Likes: 0
From: St.Thomas, Ontario, Canada
Rep Power: 0 bump...neuspeed upper strut bar, DC lower tie bar, rsx s rear sway bar, rear upper strut bar, neuspeed oil cap, battery tie down are all potentially sold, just a matter of who wants it more, lol...bidding wars are fun.
