Subs And Amp...updated Prices *pics Added*
Subs And Amp...updated Prices *pics Added*
I have this equipment that has been sitting in the basement. Only used for a month. I have 2 12" MA audio subs and a 1200-watt 2 channel sony xplod amp. Looking for a quick sale as I just purchased a set of rims and need a bit of money. Almost mint condition.
ok, $125.00obo for the 2 12's and box and $125.00obo for the amp or both for $200.00
Please respond on the thread or PM me with offers.
Each sub:
Model: MA120XE
• 350W Rms
• 700W Max
• Dual 4-Ohm Voice Coils
• 150 Oz. Double Stacked Magnets
• Mounting Depth:
• Mounting Diameter:
• Optimum Vented Box: 2.25 Cu/Ft
Round Port Diameter: 5” x 11.25”
Square Port Area: 3” x 6.5” x 12”
• Optimum Sealed Box: 1.25 Cu/Ft
• Tuning @ 40Hz
Amp:
Product Features
1200 watts max power
200 watts x 2 RMS into 4 ohms
500 watts x 1 RMS into 4 ohms
Built-in variable LPF (low-pass filter) and bass-boost circuit (up to +10 dB at 40 Hz)
Measures 15.75 x 2.25 x 10.9 inches (W x H x D)
2- or 1-channel class A/B car audio amplifier
Maximum power output 200 watts RMS (400 watts peak) x 2 into 4-ohm speakers; can be used as a 1,200-watt monaural amplifier
Pulse power supply with MOSFET output stage; accepts line-level or speaker-level inputs; offers stereo line-level throughput for additional amps
Technical Details
Model: XM-2200GTX
Color: Black with red accents
Number of amplified channels: 2
Circuit system: OTL (output transformerless) circuit
Power supply: Pulse (with MOSFET power supply and output stage)
Class: A/B
Inputs: RCA jacks (x 2), 4-pin speaker-level inputs
Outputs: 2 speaker-level outputs; 2-channel line-level through-port
Ground: Yes
Remote input: Yes
LPF (low-pass filter): Yes (with selectable crossover; 50 to 300 Hz, -12 dB/octave)
HPF (high-pass filter): No
Bass boost: Yes (up to + 10 dB @ 40 Hz)
Suitable speaker impedance: 2 to 8 ohms (stereo); 4 to 8 ohms (when used as a bridging amplifier)
Power output (peak): 400 watts x 2 (into 4 ohms), 600 watts x 2 (into 2 ohms); 1,200 watts monaural into 4 ohms
Power output (RMS): Minimum continuous average power (supply voltage at 14.4V): 200 watts x 2 (20 to 20 kHz, 0.1 percent THD, into 4 ohms); 250 watts x 2 (20 to 20 kHz, 0.15 percent THD, into 2 ohms); 500 watts, monaural (20 to 20 kHz, 0.15 percent THD, into 4 ohms)
Frequency response: 5 Hz to 50 kHz (+/- 3 dB)
Harmonic distortion: .01 percent or less (at 1 kHz, 4 ohms)
Input-level adjustment range: 0.3 to 6.0 V (RCA pin jacks); 1.2 to 12.0 V (high-level input)
Power input: 12V DC car battery (negative ground); works off DC 10.5 to 16V
Current drain: At rated output: 48 A (at 4 ohms); remote input: 1 mA
UPC: 0272426406580
Item width: 15.75 inches
Item height: 2.25 inches
Item depth: 10.875 inches
Item weight: 10.375 pounds
ok, $125.00obo for the 2 12's and box and $125.00obo for the amp or both for $200.00
Please respond on the thread or PM me with offers.
Each sub:
Model: MA120XE
• 350W Rms
• 700W Max
• Dual 4-Ohm Voice Coils
• 150 Oz. Double Stacked Magnets
• Mounting Depth:
• Mounting Diameter:
• Optimum Vented Box: 2.25 Cu/Ft
Round Port Diameter: 5” x 11.25”
Square Port Area: 3” x 6.5” x 12”
• Optimum Sealed Box: 1.25 Cu/Ft
• Tuning @ 40Hz
Amp:
Product Features
1200 watts max power
200 watts x 2 RMS into 4 ohms
500 watts x 1 RMS into 4 ohms
Built-in variable LPF (low-pass filter) and bass-boost circuit (up to +10 dB at 40 Hz)
Measures 15.75 x 2.25 x 10.9 inches (W x H x D)
2- or 1-channel class A/B car audio amplifier
Maximum power output 200 watts RMS (400 watts peak) x 2 into 4-ohm speakers; can be used as a 1,200-watt monaural amplifier
Pulse power supply with MOSFET output stage; accepts line-level or speaker-level inputs; offers stereo line-level throughput for additional amps
Technical Details
Model: XM-2200GTX
Color: Black with red accents
Number of amplified channels: 2
Circuit system: OTL (output transformerless) circuit
Power supply: Pulse (with MOSFET power supply and output stage)
Class: A/B
Inputs: RCA jacks (x 2), 4-pin speaker-level inputs
Outputs: 2 speaker-level outputs; 2-channel line-level through-port
Ground: Yes
Remote input: Yes
LPF (low-pass filter): Yes (with selectable crossover; 50 to 300 Hz, -12 dB/octave)
HPF (high-pass filter): No
Bass boost: Yes (up to + 10 dB @ 40 Hz)
Suitable speaker impedance: 2 to 8 ohms (stereo); 4 to 8 ohms (when used as a bridging amplifier)
Power output (peak): 400 watts x 2 (into 4 ohms), 600 watts x 2 (into 2 ohms); 1,200 watts monaural into 4 ohms
Power output (RMS): Minimum continuous average power (supply voltage at 14.4V): 200 watts x 2 (20 to 20 kHz, 0.1 percent THD, into 4 ohms); 250 watts x 2 (20 to 20 kHz, 0.15 percent THD, into 2 ohms); 500 watts, monaural (20 to 20 kHz, 0.15 percent THD, into 4 ohms)
Frequency response: 5 Hz to 50 kHz (+/- 3 dB)
Harmonic distortion: .01 percent or less (at 1 kHz, 4 ohms)
Input-level adjustment range: 0.3 to 6.0 V (RCA pin jacks); 1.2 to 12.0 V (high-level input)
Power input: 12V DC car battery (negative ground); works off DC 10.5 to 16V
Current drain: At rated output: 48 A (at 4 ohms); remote input: 1 mA
UPC: 0272426406580
Item width: 15.75 inches
Item height: 2.25 inches
Item depth: 10.875 inches
Item weight: 10.375 pounds
Last edited by theCIVdaddy; May 7, 2006 at 09:38 AM.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Deeup511
I.C.E. (Audio) & Electrical Upgrades
3
Aug 30, 2015 04:48 AM
Touge
Canada East
0
Aug 11, 2015 10:21 PM
knknif
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
Aug 4, 2015 06:11 PM
