SS vacume Lines BnT Performance
SS vacume Lines BnT Performance
Hey guys we now have stainless steel vacume lines. The sizes range from 1/4 to 3/8 inche and also -4 or-6 line.
I just did mine yesterday using all aeroquip fittings
here is a pic: http://www.importpassion.com/forums/...owpm&pmid=6881
that is using -6 line which is what Tial recomended cause they like to use 6mm ID line.
Most applications will be fine with -4 line simular.
I will be doing Drew's car and Steve's car.
I just did mine yesterday using all aeroquip fittings
here is a pic: http://www.importpassion.com/forums/...owpm&pmid=6881
that is using -6 line which is what Tial recomended cause they like to use 6mm ID line.
Most applications will be fine with -4 line simular.
I will be doing Drew's car and Steve's car.
There is gl@ss in my @SS...Joined: Apr 2005
Posts: 5,066
Likes: 0
From: Portsmouth, Ohio
Rep Power: 321 
Re: SS vacume Lines BnT Performance
Very nice Chris! Yea I can't wait to have the car down at your shop. I will be doin the smaller lines and smaller fittings. My question for me, and for others is, are you able to get different color finishers, fittings, and T's. Say do black T's Black hose connectors and red finishers. I think that would def be pimp as hell to do that.
On a side note as well. On the Goodridge site, i found hose seperators that keep your lines all nice and routed cleanly. They would def work well with the wastegate lines, makes everything follow each other and look neat in the engine bay. You can get them in Silver, Blue, and Red finishes. Part number is PHS. Take a look.
On a side note as well. On the Goodridge site, i found hose seperators that keep your lines all nice and routed cleanly. They would def work well with the wastegate lines, makes everything follow each other and look neat in the engine bay. You can get them in Silver, Blue, and Red finishes. Part number is PHS. Take a look.
Joined: Jun 2003
Posts: 2,161
Likes: 0
From: Macon GA
Rep Power: 300 Re: SS vacume Lines BnT Performance
The link doesnt work, it says: Invalid Private Message specified. If you followed a valid link, please notify the administrator
Re: SS vacume Lines BnT Performance
Yes I can use russel fittings which are black. I choose blue cause of the color of the BOV the WG
http://img149.imageshack.us/img149/8450/dscn0728un1.jpg
http://img149.imageshack.us/img149/8450/dscn0728un1.jpg
Joined: Apr 2005
Posts: 5,066
Likes: 0
From: Portsmouth, Ohio
Rep Power: 321 Re: SS vacume Lines BnT Performance
Def looks badass, i think i'll run the smaller line in SS with black and red fittings, def would look pimp, and def use the line separators.
Black SS lines with red fittings though would look pimp too. All these tough decisions Chris! lol.
O Chris, i got the injector clips in today from Paul so i'm good to go on that.
Black SS lines with red fittings though would look pimp too. All these tough decisions Chris! lol.
O Chris, i got the injector clips in today from Paul so i'm good to go on that.
Re: SS vacume Lines BnT Performance
What you saw on the pic you sent me Drew was brake line hose and fittings.
I will sit down with you when I get your car here and I can show you what we can get and already have
I will sit down with you when I get your car here and I can show you what we can get and already have
My Pony Princess is the inspiration for my ride.
iTrader: (17)
Joined: Apr 2006
Posts: 5,217
Likes: 0
Rep Power: 0 
Re: SS vacume Lines BnT Performance
Good stuff Chris. I just hate cutting that SS line. Bad fat PITA, but worth it in the end! I'll be replacing most of the line in the my bay with it eventually. Looks a lot cleaner, that's for sure.
Re: SS vacume Lines BnT Performance
Well the flex line is much cheaper than the SS line. Drew yours will be abit nicer since you have the vacume block. i would run -6 into the block and run your 1/4 inche off of that.
Re: SS vacume Lines BnT Performance
o ye i can get those..russell makes those as well
http://russellperformance.com/new/mc...-classic.shtml
http://russellperformance.com/new/mc...-classic.shtml
Joined: Apr 2005
Posts: 5,066
Likes: 0
From: Portsmouth, Ohio
Rep Power: 321 Re: SS vacume Lines BnT Performance
OH ****! SOLD SOLD SOLD! that's exactly what i want, in the smaller lines, not a fan of the big bulky ones. Damn man this gonna be hot!
Joined: Apr 2005
Posts: 5,066
Likes: 0
From: Portsmouth, Ohio
Rep Power: 321 Re: SS vacume Lines BnT Performance
How much is this looking at if i do the black hose with red and black fittings.
Joined: Apr 2005
Posts: 5,066
Likes: 0
From: Portsmouth, Ohio
Rep Power: 321 Re: SS vacume Lines BnT Performance
Nice, i'm gonna be running the Cusco Catch Can. So that is gonna look hot. Chris I'm glad you're not too close to me, or else I'd be at your shop spending money when I didn't need to lol.
Joined: Apr 2005
Posts: 5,066
Likes: 0
From: Portsmouth, Ohio
Rep Power: 321 Re: SS vacume Lines BnT Performance
So i'm thinking either -3AN or -4AN lines, if you could give me a price in the SS lines and the Black Flex Hose lines, i'm debating on what I like better. So hit me up when u get a chance.
Joined: Apr 2005
Posts: 5,066
Likes: 0
From: Portsmouth, Ohio
Rep Power: 321 Re: SS vacume Lines BnT Performance
I am, i was just letting you know ahead of time what i was looking for. I'm not rushing by any means.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Touge
Canada East
0
Aug 13, 2015 04:32 AM
Touge
Ottawa
0
Jul 18, 2015 05:39 PM
Touge
Canada East
0
Jul 18, 2015 05:35 PM
