!!!The big post of turbo'd WHP numbers!!!
Registered!!
Joined: Sep 2003
Posts: 25
Likes: 0
From: Philly, PA
Rep Power: 0 
Dyno'd at 266.7WHP / 215.4TQ
best 1/4mi time is 13.511 @ 103.76mph (2.0 60ft)
Accomplished on a 2002 Civic Si (EP3) at 8psi w/ a Cybernation Kit and CatBack
Now runnin 10.5psi - same setup.
No dyno or track time yet but soon.
Eric
best 1/4mi time is 13.511 @ 103.76mph (2.0 60ft)
Accomplished on a 2002 Civic Si (EP3) at 8psi w/ a Cybernation Kit and CatBack
Now runnin 10.5psi - same setup.
No dyno or track time yet but soon.
Eric
Skyline R33
Joined: Aug 2003
Posts: 1,136
Likes: 0
From: Houston, TX
Rep Power: 0
Originally Posted by esmith13
Dyno'd at 266.7WHP / 215.4TQ
best 1/4mi time is 13.511 @ 103.76mph (2.0 60ft)
Accomplished on a 2002 Civic Si (EP3) at 8psi w/ a Cybernation Kit and CatBack
Now runnin 10.5psi - same setup.
No dyno or track time yet but soon.
Eric
best 1/4mi time is 13.511 @ 103.76mph (2.0 60ft)
Accomplished on a 2002 Civic Si (EP3) at 8psi w/ a Cybernation Kit and CatBack
Now runnin 10.5psi - same setup.
No dyno or track time yet but soon.
Eric
Registered!!
iTrader: (1)
Joined: Apr 2001
Posts: 2,609
Likes: 0
From: Houston, Texas, US
Rep Power: 0 150whp/155lb/ft TQ @ 5psi (completely stock)
That was back in Jan., now it is at 10psi. No numbers yet...
The Mazdaspeed has a t25, plastic piping !!!, a small side mount intercooler, two cats, and small 1.75" exhaust piping. I need to make some changes.
That was back in Jan., now it is at 10psi. No numbers yet...
The Mazdaspeed has a t25, plastic piping !!!, a small side mount intercooler, two cats, and small 1.75" exhaust piping. I need to make some changes.
221 hp 216 tq @ 13lbs.
14.1 1/4mi., 100.34mph @12psi, 2.3 60ft.turned down boost because of wheel spin.
low compression wiseco piston,crower rods,and a built head done by bce.
basic sf kit.
14.1 1/4mi., 100.34mph @12psi, 2.3 60ft.turned down boost because of wheel spin.
low compression wiseco piston,crower rods,and a built head done by bce.
basic sf kit.
