Boosted 7thgen Roll call
#1
SRT-4 owner with 2MCHPSI
Thread Starter
iTrader: (8)
Join Date: Jan 2002
Location: your g/f house, Louisiana, US
Posts: 1,695
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Boosted 7thgen Roll call
thought that i would start a role call for all of us that are boosted...i have noticed here lately that quite i few people are boostin their 7thgens.....thought that this would be a good place to people to look for us to pm us questions and stuff....post what you got....maybe someone could sticky this.....
2002 boosted dx SF kit with alcy injection
daily 7lbs...2000miles on kit and no problems...block and head still factory...
turbo xs dual stage manual boost controller...and hks turbo timer...
i have another motor ordered and i am waitn on it to arrive so that i can send it to exospeed.com to get a full bottom end build to handle 20+lbs...still search for someone to do my head....converting to return very soon...
whatchu got under your hood
2002 boosted dx SF kit with alcy injection
daily 7lbs...2000miles on kit and no problems...block and head still factory...
turbo xs dual stage manual boost controller...and hks turbo timer...
i have another motor ordered and i am waitn on it to arrive so that i can send it to exospeed.com to get a full bottom end build to handle 20+lbs...still search for someone to do my head....converting to return very soon...
whatchu got under your hood
Last edited by iamboo; 03-21-2004 at 01:28 PM.
#2
Turbo Member
iTrader: (3)
Join Date: Mar 2001
Location: Salisbury, Maryland, US
Age: 39
Posts: 2,490
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 307 2001 boosted EX
ported and pollished T25BB on custom equal lenght SF manifold portmatched to head
Tial 38mm wastegate w/ 5.6 psi spring
Turbo XS MBC
TSI injector controller/turbo timer w/ 2 secondary injectors
daily 6lbs track 12lbs boosted since june/03 blown since 1/04 will rise again in April
Aqua stelth water/alcohol injection system w/ 3 gallon aluminum fuel cell
KMS block guard
OEM nippon leakless head gasket
DH race pnp head
DH custom intake manifold
DH 74mm TB
DH crank pulley
Greddy type S BOV
Spearco 18x6x2 intercooler
QTEC exhaust cutout in test pipe
I will be switching to a Larger HKS turbo that uses a T25 flange when I buy my DH fully built short block.
ported and pollished T25BB on custom equal lenght SF manifold portmatched to head
Tial 38mm wastegate w/ 5.6 psi spring
Turbo XS MBC
TSI injector controller/turbo timer w/ 2 secondary injectors
daily 6lbs track 12lbs boosted since june/03 blown since 1/04 will rise again in April
Aqua stelth water/alcohol injection system w/ 3 gallon aluminum fuel cell
KMS block guard
OEM nippon leakless head gasket
DH race pnp head
DH custom intake manifold
DH 74mm TB
DH crank pulley
Greddy type S BOV
Spearco 18x6x2 intercooler
QTEC exhaust cutout in test pipe
I will be switching to a Larger HKS turbo that uses a T25 flange when I buy my DH fully built short block.
Last edited by RiceBuRNeR; 03-21-2004 at 02:22 PM.
#3
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (20)
Join Date: Jul 2003
Location: Dallas, PA
Age: 43
Posts: 30,677
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 584 2001 EX
Garret super 60 T3 turbo
SF equal length mani
SF fuel system
SF intercooler
SF alcohol injection
SF 3" downpipe
Turbo XS RFL bov
ohmysac's MBC
Of course i have this kit but not installed and most of you know why lease:
Garret super 60 T3 turbo
SF equal length mani
SF fuel system
SF intercooler
SF alcohol injection
SF 3" downpipe
Turbo XS RFL bov
ohmysac's MBC
Of course i have this kit but not installed and most of you know why lease:
#4
Registered!!
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (2)
Join Date: Jul 2002
Location: Atlanta
Age: 43
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 2002 boosted EX
SF base kit w/alcohol injection
SF fuel system
SF FMIC
Removed cat
Turbo XS RFLO bov
AVC-R boost controller
Apexi auto timer
SF base kit w/alcohol injection
SF fuel system
SF FMIC
Removed cat
Turbo XS RFLO bov
AVC-R boost controller
Apexi auto timer
#5
New Member
Join Date: Aug 2003
Location: Louisiana
Age: 40
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 well I'm just waiting on my kit to get here...
'01 EX
Garret super 60 T3 turbo
SF alcohol injection
SF equal length mani
SF fuel system
SF intercooler
SF alcohol injection
Polished piping
Greddy Profec B Spec II boost controller
Greddy Full Auto Turbo Timer
Centerforce Clutch
NGK Iridium spark plugs...
MORE TO COME!!
and I got questions too...what guages do u guess recommend to have...I was thinking boost (well I heard I didn't need my boost guage since my boost controller will read it), so oil pressure and EGT guage...what you guys think...
'01 EX
Garret super 60 T3 turbo
SF alcohol injection
SF equal length mani
SF fuel system
SF intercooler
SF alcohol injection
Polished piping
Greddy Profec B Spec II boost controller
Greddy Full Auto Turbo Timer
Centerforce Clutch
NGK Iridium spark plugs...
MORE TO COME!!
and I got questions too...what guages do u guess recommend to have...I was thinking boost (well I heard I didn't need my boost guage since my boost controller will read it), so oil pressure and EGT guage...what you guys think...
#6
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (2)
Join Date: Sep 2001
Location: Lexington, KY
Age: 41
Posts: 26,407
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 560 2001 LX
with BOOSTER 2002 EX motor
turbonetics T3T4 54 trim turbo
max rev polish manifold
return fuel system
JE PISTONS
GREDDY EMANAGE
Apexi AVCR
Apexi turbo timer
greddy type 31 intercooler kit
tial 35mm wastegate
HKS SSQV BOV
Greddy EVO exhaust
RC engineering 440 injectors 4x
NGK spark plugs
ACT clutch
with BOOSTER 2002 EX motor
turbonetics T3T4 54 trim turbo
max rev polish manifold
return fuel system
JE PISTONS
GREDDY EMANAGE
Apexi AVCR
Apexi turbo timer
greddy type 31 intercooler kit
tial 35mm wastegate
HKS SSQV BOV
Greddy EVO exhaust
RC engineering 440 injectors 4x
NGK spark plugs
ACT clutch
Last edited by C2i0v0i1C; 03-21-2004 at 10:48 AM.
#7
BOOSTED HYBRID
Join Date: Feb 2002
Location: fayetteville, North Carolina, US
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 2001 ex coupe
k20a2
precision sc61 t350/.63ar
rc saturated 750cc injectors
9:0:1 pistons
forged rods
cybernation manifold
3" downpipe w/ test pipe
3" mandrel bent piping with 3" magnaflow oval muffler
spearco intercooler
2.25 intercooler piping
hks ssqv bov
tial wastegate 8 psi spring
greddy egt guage
avcr
greddy turbo timer
autometer boost guage
aeromotive fpr
return fuel system
walboro 255lph intank pump
exedy stage II clutch
quaife lsd
hondata kpro
car is untuned till my appointment later this month.
k20a2
precision sc61 t350/.63ar
rc saturated 750cc injectors
9:0:1 pistons
forged rods
cybernation manifold
3" downpipe w/ test pipe
3" mandrel bent piping with 3" magnaflow oval muffler
spearco intercooler
2.25 intercooler piping
hks ssqv bov
tial wastegate 8 psi spring
greddy egt guage
avcr
greddy turbo timer
autometer boost guage
aeromotive fpr
return fuel system
walboro 255lph intank pump
exedy stage II clutch
quaife lsd
hondata kpro
car is untuned till my appointment later this month.
Last edited by icebergslim; 08-03-2004 at 08:38 PM.
#9
Chicks dig my scent
Join Date: May 2003
Location: Hickville, NC
Age: 38
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 iceberg slim...we need to meet up one day i live in Raleigh...
(turbo going on april 9th, not a bad birthday present)
2002 LX sedan
Garrett GT17 turbo
HKS manifold
custom 2.25" IC piping
Johhnyracecar.com intercooler (30"x2"x6X)
custom 2.5" downpipe
denso iridium IK20 plugs
HKS SSQV blow off valve
Greddy turbo timer
Turbo XS dual stage boost controller
ACT clutch
SF fuel kit
SF alcohol injection (late april)
SAFC II (late april)
(turbo going on april 9th, not a bad birthday present)
2002 LX sedan
Garrett GT17 turbo
HKS manifold
custom 2.25" IC piping
Johhnyracecar.com intercooler (30"x2"x6X)
custom 2.5" downpipe
denso iridium IK20 plugs
HKS SSQV blow off valve
Greddy turbo timer
Turbo XS dual stage boost controller
ACT clutch
SF fuel kit
SF alcohol injection (late april)
SAFC II (late april)
#11
Registered!!
Join Date: Mar 2003
Location: Pembroke Pines, Florida, US
Age: 39
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 I am so envious of all of you......Ill keep dreamin in the meantime and imaging everytime i walk out to my car theres a Front Mount ....
#12
Your Parts Guy
iTrader: (29)
Join Date: Jun 2001
Posts: 2,447
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Originally posted by ReD2k1
I am so envious of all of you......Ill keep dreamin in the meantime and imaging everytime i walk out to my car theres a Front Mount ....
I am so envious of all of you......Ill keep dreamin in the meantime and imaging everytime i walk out to my car theres a Front Mount ....
SF base kit
Denso IK-20
SF Alcohol Injection (not installed yet deciding on using direct port from nitrous setup)
CivicSkater....props for going custom bro. How you like that HKS mani?
#14
Chicks dig my scent
Join Date: May 2003
Location: Hickville, NC
Age: 38
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Originally posted by dober
I've never heard of that kit??? just playin
SF base kit
Denso IK-20
SF Alcohol Injection (not installed yet deciding on using direct port from nitrous setup)
CivicSkater....props for going custom bro. How you like that HKS mani?
I've never heard of that kit??? just playin
SF base kit
Denso IK-20
SF Alcohol Injection (not installed yet deciding on using direct port from nitrous setup)
CivicSkater....props for going custom bro. How you like that HKS mani?
I'll let you know in two weeks...im ordering my SF fuel kit this week and once it gets here it'll all be set up. But the manifold with the GT17 turbo fits perfect...no complaints as of yet, cant wait. I got all my gauges, oil lines, intercooler hooked up ready to roll
#15
Registered!!
iTrader: (6)
Join Date: Jun 2002
Location: New York
Posts: 2,549
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 292 SF base Kit (candy red pipes) w/ alcohol injection
super 60 turbo
tranny cooler
greddy turbo timer
a/f boost autometer gauges.
denzo 1k20 spark plugs
manuall boost controller
NX N-tercooler kit ordered
super 60 turbo
tranny cooler
greddy turbo timer
a/f boost autometer gauges.
denzo 1k20 spark plugs
manuall boost controller
NX N-tercooler kit ordered
#17
Premium Boosted Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (11)
Join Date: Sep 2002
Location: Arizona
Posts: 3,857
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 302 Custom Turbo Upgrade, T04B/T3 hybrid, ported and clipped, 60AR
SF Equal Runner manifold
Alcohol injection kit
HKS SSQ BOV
Powder coated turbo pipes (satin silver)
Vortec FMU and inline fuel pump
smoothe bend pipe instead of bonnet
SF custom fuel system
SF MBC
SF FMIC
2.5" T304 Mandrel bent stainless steel midsection
Mozart Rear-section
4AWG Engine Ground Kit
Apexi-VAFC2
ACT Stage 2 Extreme Pressure Plate
ACT Extreme disc
ACT Prolite 8.2lb Chromoly flywheel
Nachi Pilot and Release bearings
Moroso Oil Seperator system and breather
Denso IK20 Spark Plugs (Iridium)
Random Tech Highflow Cat
Mobile-1 Driv-Clean Formula (5W-30)
Nippon Thermostat
Nippon Head Gasket
Moroso Battery tank, with relocated battery (trunk)
Custom intake (where batteryy used to be) - Larger air filter element...
I think that covers my engine for now. I am sending cash to DH tomorrow for my built shortblock, and I'll install my Vortec fuel rail and 330cc injectors when it's time.
Check my profile for other mods...
SF Equal Runner manifold
Alcohol injection kit
HKS SSQ BOV
Powder coated turbo pipes (satin silver)
Vortec FMU and inline fuel pump
smoothe bend pipe instead of bonnet
SF custom fuel system
SF MBC
SF FMIC
2.5" T304 Mandrel bent stainless steel midsection
Mozart Rear-section
4AWG Engine Ground Kit
Apexi-VAFC2
ACT Stage 2 Extreme Pressure Plate
ACT Extreme disc
ACT Prolite 8.2lb Chromoly flywheel
Nachi Pilot and Release bearings
Moroso Oil Seperator system and breather
Denso IK20 Spark Plugs (Iridium)
Random Tech Highflow Cat
Mobile-1 Driv-Clean Formula (5W-30)
Nippon Thermostat
Nippon Head Gasket
Moroso Battery tank, with relocated battery (trunk)
Custom intake (where batteryy used to be) - Larger air filter element...
I think that covers my engine for now. I am sending cash to DH tomorrow for my built shortblock, and I'll install my Vortec fuel rail and 330cc injectors when it's time.
Check my profile for other mods...
#18
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (4)
Join Date: Sep 2003
Location: SOUTHMPTON,NJ
Age: 45
Posts: 1,271
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 264 in now
custom return line fuel rail
custom fuel pump
fuel pressure regulator
oil catch can
kms intake manifold
meagan high flow cat
going in fri !!!!
t3/t4 turbonetics polished turbo
spearco fmic
custom piping
greddy type s bov
profec e 01 boost cont.
gretty e-manage
auto meter boost, air/fuel and oil pressure gauges!!!
and yes im excited!!
custom return line fuel rail
custom fuel pump
fuel pressure regulator
oil catch can
kms intake manifold
meagan high flow cat
going in fri !!!!
t3/t4 turbonetics polished turbo
spearco fmic
custom piping
greddy type s bov
profec e 01 boost cont.
gretty e-manage
auto meter boost, air/fuel and oil pressure gauges!!!
and yes im excited!!
#19
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (3)
Join Date: Aug 2002
Location: NJ
Age: 41
Posts: 4,255
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 ummm... I was
Turbonetics T3/T04B (polished/upgraded)
TiAL 35mm Wastegate
GReddy PRofec E01
GReddy E-manage
GReddy Full Auto Timer
GReddy Type S BOV
RC Engineering 370cc Injectors
Modified Fuel Rail
Aeromotive Fuel Pressure Regulator
Converted Return Fuel System
HPRacing Jspec Cat-back
Random Technology Hi-Flo Cat
Stafford Fabrication Downpipe
Stafford Fabrication Manifold
Stafford Fabrication Dump tube
Stafford Fabrication Custom Aluminum IC piping
Spearco FMIC
Walbro 255lph fuel pump
SS Oil Feed Line
SS Oil Return Line
SS Fuel Return Line
Denso IK22
Weapon R Oil Catch Can
DIY Windshield Washer Reservoir
10,000,000 -AN fittings
5000 GReddy/Trust Vacuum Lines
KMS Intake Manifold
ACT HD Clutch kit w/ Organic Disk
Revo Shortshifter
Autometer Ultra-Lite Oil Pressure
Autometer Ultra-Lite A/F
Autometer Ultra-Lite Boost
Autometer Triple Gauge Pillar
Soon to be on the 7thgen swap roll call
Then to be on the 7thgen Swap w/ Turbo roll call (a good while though)
But as of now:
DC 4-1 Ceramic Header
Thermal R&D ST System
Random Technology Hi-Flow Cat
Autometer UL Nitrous Pressure
Autometer UL A/F
Zex Nitrous Kit w/ the goodies
blah blah blah
Turbonetics T3/T04B (polished/upgraded)
TiAL 35mm Wastegate
GReddy PRofec E01
GReddy E-manage
GReddy Full Auto Timer
GReddy Type S BOV
RC Engineering 370cc Injectors
Modified Fuel Rail
Aeromotive Fuel Pressure Regulator
Converted Return Fuel System
HPRacing Jspec Cat-back
Random Technology Hi-Flo Cat
Stafford Fabrication Downpipe
Stafford Fabrication Manifold
Stafford Fabrication Dump tube
Stafford Fabrication Custom Aluminum IC piping
Spearco FMIC
Walbro 255lph fuel pump
SS Oil Feed Line
SS Oil Return Line
SS Fuel Return Line
Denso IK22
Weapon R Oil Catch Can
DIY Windshield Washer Reservoir
10,000,000 -AN fittings
5000 GReddy/Trust Vacuum Lines
KMS Intake Manifold
ACT HD Clutch kit w/ Organic Disk
Revo Shortshifter
Autometer Ultra-Lite Oil Pressure
Autometer Ultra-Lite A/F
Autometer Ultra-Lite Boost
Autometer Triple Gauge Pillar
Soon to be on the 7thgen swap roll call
Then to be on the 7thgen Swap w/ Turbo roll call (a good while though)
But as of now:
DC 4-1 Ceramic Header
Thermal R&D ST System
Random Technology Hi-Flow Cat
Autometer UL Nitrous Pressure
Autometer UL A/F
Zex Nitrous Kit w/ the goodies
blah blah blah
#20
Registered!!
iTrader: (3)
Join Date: Feb 2003
Location: Lake George, New York, US
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 FI Stuff
SF basic kit w/ the Turbo SB BOV
Denso IK20's
Apexi turbo timer
Autometer a/f gauge
Autometer boost gauge
Turbo XS Boost Controller
Summit Racing Fuel Pressure gauge
(feel like I am forgetting something but I guess not)
...and a recent addition- ported head to give it a little more air
Hey another part to the role call, any other girls out there besides me that are boosted?
SF basic kit w/ the Turbo SB BOV
Denso IK20's
Apexi turbo timer
Autometer a/f gauge
Autometer boost gauge
Turbo XS Boost Controller
Summit Racing Fuel Pressure gauge
(feel like I am forgetting something but I guess not)
...and a recent addition- ported head to give it a little more air
Hey another part to the role call, any other girls out there besides me that are boosted?
#22
::+::My Girlfriend is hot, but I'm still GAY::+::
iTrader: (12)
Join Date: Jan 2003
Location: Cali -818-
Age: 41
Posts: 3,235
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 292 SF basic kit
Turbo XS BOV
Alcohol injection
SF manifold (will be polish soon)
pivot baby turbo timer
Denso IK 22
autometer a/f gauge
AC boost gauge
MBC
Turbo XS BOV
Alcohol injection
SF manifold (will be polish soon)
pivot baby turbo timer
Denso IK 22
autometer a/f gauge
AC boost gauge
MBC
#23
Registered!!
Join Date: Jan 2002
Location: Cocoa, Florida, US
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 I havn't posted in a while.
TURBO COMPONENTS:
-Garrett T3 turbo super 60
-Greddy Type S blow off valve
-Turbonetic Deltagate Wastegate
-Greddy Profec E-01EBC boost controller and E-manage computer
-Custom built for size and horse power application intercooler
-Custom charge piping
-Greddy charge piping conectors
-Used T-bolt clamps on everything
FUEL COMPONENTS:
-Venom fuel rail
-RC 440 cc injectors
-Walpro 255 lph fuel pump
-Cartech billett F.M.U.
-AEM fuel filter
-Return line
-15 gallon polished fuel cell in trunk (stock one was removed)
INTAKE COMPONENTS:
-Custom fit b16 Venom intake manifold
-2mm bigger manley valves
-Port and polished head
-4 angle valve job
-BBK throttle body 62 mm
EXHAUST COMPONENTS:
-Custom tubular bent turbo manifold
-Custom downpipe
-1mm bigger manley exhaust valves
-No cat
-Extra 02 sensor bungs for air/fuel (and moved stock ones farther back)
INTERNAL COMPONENTS:
-Pauter pistons (custom made, just send them one of your stock ones $700)
-Pauter rods (custom made, just send them one of your stock ones $520)
-KMS block gaurd (had motor custom sleeved but had some problems, I might go back to that block after they are worked out)
-Resurfased head
TRACTION COMPONENTS:
-Drag radials (only used on track)
-ACT stage 3 pressure plate
-ACT street disc
-ACT 8.2 pound flywheel
OTHER ENGINE COMPONENTS:
-AEM cam gear
-Unorthodox crank pulley
-Zex spark plugs
-Fluidyne radiator and catch can
-Removed power steering and A.C. (I shouldn't have but it dosn't bother me)
-NX Intercooler
-25 shot of nitrous for turbo spooling (spools at 1300 without it, also not used on dyno)
I have plenty of pics, but I don't know how to reduce the size. (trust me I have tried and it is frustrating. SUPERMEX has seen my caralong with a few others.
Dynoed at 178.5 whp @ 5 psi estimated crank power: 195
Dynoed at 234.3 whp @ 10 psi estimated crank power: 260
Dynoed at 277.8 whp @ 15 psi estimated crank power: 300
Dynoed at 305.6 whp @ 18 psi estimated crank power: 325
I have alot of more mods done to my car. Custom purple paint. Custom black and purple leather, body kit, rims, lambo doors, and much more.
Thanks to:
New Way Auto for parts and tuning
Brevard Cylinder Head for head work
Beyel Brothers for internals
Marks Auto Body for paint and body kit
Tredwell Auto Trim for custom interior
and the rest I did with the help of some friends on some things.
I don't think I left anything out, but if I did I will add it when I remember or go out to my car and look.
TURBO COMPONENTS:
-Garrett T3 turbo super 60
-Greddy Type S blow off valve
-Turbonetic Deltagate Wastegate
-Greddy Profec E-01EBC boost controller and E-manage computer
-Custom built for size and horse power application intercooler
-Custom charge piping
-Greddy charge piping conectors
-Used T-bolt clamps on everything
FUEL COMPONENTS:
-Venom fuel rail
-RC 440 cc injectors
-Walpro 255 lph fuel pump
-Cartech billett F.M.U.
-AEM fuel filter
-Return line
-15 gallon polished fuel cell in trunk (stock one was removed)
INTAKE COMPONENTS:
-Custom fit b16 Venom intake manifold
-2mm bigger manley valves
-Port and polished head
-4 angle valve job
-BBK throttle body 62 mm
EXHAUST COMPONENTS:
-Custom tubular bent turbo manifold
-Custom downpipe
-1mm bigger manley exhaust valves
-No cat
-Extra 02 sensor bungs for air/fuel (and moved stock ones farther back)
INTERNAL COMPONENTS:
-Pauter pistons (custom made, just send them one of your stock ones $700)
-Pauter rods (custom made, just send them one of your stock ones $520)
-KMS block gaurd (had motor custom sleeved but had some problems, I might go back to that block after they are worked out)
-Resurfased head
TRACTION COMPONENTS:
-Drag radials (only used on track)
-ACT stage 3 pressure plate
-ACT street disc
-ACT 8.2 pound flywheel
OTHER ENGINE COMPONENTS:
-AEM cam gear
-Unorthodox crank pulley
-Zex spark plugs
-Fluidyne radiator and catch can
-Removed power steering and A.C. (I shouldn't have but it dosn't bother me)
-NX Intercooler
-25 shot of nitrous for turbo spooling (spools at 1300 without it, also not used on dyno)
I have plenty of pics, but I don't know how to reduce the size. (trust me I have tried and it is frustrating. SUPERMEX has seen my caralong with a few others.
Dynoed at 178.5 whp @ 5 psi estimated crank power: 195
Dynoed at 234.3 whp @ 10 psi estimated crank power: 260
Dynoed at 277.8 whp @ 15 psi estimated crank power: 300
Dynoed at 305.6 whp @ 18 psi estimated crank power: 325
I have alot of more mods done to my car. Custom purple paint. Custom black and purple leather, body kit, rims, lambo doors, and much more.
Thanks to:
New Way Auto for parts and tuning
Brevard Cylinder Head for head work
Beyel Brothers for internals
Marks Auto Body for paint and body kit
Tredwell Auto Trim for custom interior
and the rest I did with the help of some friends on some things.
I don't think I left anything out, but if I did I will add it when I remember or go out to my car and look.