People with the SF Turbo... UpDates??
Thread Starter
Registered!!
Joined: Feb 2004
Posts: 132
Likes: 0
From: ny
Rep Power: 0 
People with the SF Turbo... UpDates?? Which kit did you get?
What are the specs if you had it dyno'd(if with mods, which ones)?
What is your quatermile time?
Any other comments/suggestions after running the turbo for a while?
I'm lookin to get a kit near the spring, just want an update to see how everybody is doing, and what kind of gains people are getting
What are the specs if you had it dyno'd(if with mods, which ones)?
What is your quatermile time?
Any other comments/suggestions after running the turbo for a while?
I'm lookin to get a kit near the spring, just want an update to see how everybody is doing, and what kind of gains people are getting
Registered!!
iTrader: (1)
Joined: Jun 2002
Posts: 944
Likes: 0
From: Toronto, Ontario, Canada
Rep Power: 0 i agree why cant everyone just do that ? its not a lot to ask for ?
everyone with a turbo, should put their dyno and their quarter mile time and of course what kit they r using the psi they r running, and thats alL!
its not difficult,
everyone with a turbo, should put their dyno and their quarter mile time and of course what kit they r using the psi they r running, and thats alL!
its not difficult,
Registered!!
iTrader: (3)
Joined: Feb 2003
Posts: 407
Likes: 0
From: Lake George, New York, US
Rep Power: 0 OK I think I have posted this before but-
I dynoed my EX w/ the SF kit this fall at 8PSI
184hp
189.3 tq
No 1/4 mile yet- once my DH P and P is on then I am going to run it (dyno and 1/4 time)
I dynoed my EX w/ the SF kit this fall at 8PSI
184hp
189.3 tq
No 1/4 mile yet- once my DH P and P is on then I am going to run it (dyno and 1/4 time)
Registered!!
Joined: Jan 2004
Posts: 97
Likes: 0
From: Houston, Texas
Rep Power: 0 this is a really good idea and it would help a lot of people out. its not that hard either, just post your ETs and you set-up. maybe it would be a better idea to make another thread about this in the spring/summer when more people can make it out the the track.
Registered!!
iTrader: (9)
Joined: Apr 2003
Posts: 1,099
Likes: 0
From: So Cal, This place called Orange County
Rep Power: 0 Originally posted by OsOBooSTeD
i wont even participate in this...
u wanna know how fast a 7thgen Turbo is?
GET ONE.
i wont even participate in this...
u wanna know how fast a 7thgen Turbo is?
GET ONE.
Registered!!
iTrader: (2)
Joined: Mar 2003
Posts: 3,071
Likes: 0
From: Lancaster, California, US
Rep Power: 312 let me start.....
Original Kit
SF base kit + alcohol injection
165 whp and 166 ft/lbs on 5.5 psi
13.6 @ 102 mph on 9 psi
Stage II kit
190.5 whp and 178.5 ft/lbs on 5.5 psi (clutch slipped at 5600 rpm)
no track time yet.
Original Kit
SF base kit + alcohol injection
165 whp and 166 ft/lbs on 5.5 psi
13.6 @ 102 mph on 9 psi
Stage II kit
190.5 whp and 178.5 ft/lbs on 5.5 psi (clutch slipped at 5600 rpm)
no track time yet.
Smuggling bananas and mexicans all for one low price...
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (11)
Joined: Aug 2003
Posts: 9,996
Likes: 0
From: Langley AFB, VA
Rep Power: 396 
Wait cat man. I thoguth the base kit was more hp lol. DAYUM about 32 g's just to get about 165 hp? So tell me alittle about stage II, I have seen a thread. What it compiles of and stuff like price
Registered!!
iTrader: (2)
Joined: Mar 2003
Posts: 3,071
Likes: 0
From: Lancaster, California, US
Rep Power: 312 Those numbers for my stage I were with the stock plugs and exhaust on an lx. When i swapped exhausts and plugs, i gained about 15-20 whp. And dropped .4 sec off my 1/4 mile.
Stage II isnt complete yet. So there arent any specs right this moment
Stage II isnt complete yet. So there arent any specs right this moment
Thread Starter
Registered!!
Joined: Feb 2004
Posts: 132
Likes: 0
From: ny
Rep Power: 0 thanks for the info rscivic, but i really wish people would post some specific info in here. Telling me how much horsepower you produce means nothing if i don't know which kit and at what psi you were boosting at! Also having an lx or ex makes a difference. oOh well i guess this was never meant to be.
Joined: Sep 2002
Posts: 3,857
Likes: 0
From: Arizona
Rep Power: 326 OK... with a lean problem... this is the only time i ran with the kit... My fuel is fixed now so it's much faster...
SF Turbo kit
Equal runner manifold
2.5" exhaust
Iridium plugs
15.6@89.8mph@ only 3psi, and getting a fuel drop off, making me let off the gas.
I can beat my friends mid 14sec GSX now, at only 5psi, so hopfully mid to low 13s when i run 10psi this spring.
SF Turbo kit
Equal runner manifold
2.5" exhaust
Iridium plugs
15.6@89.8mph@ only 3psi, and getting a fuel drop off, making me let off the gas.
I can beat my friends mid 14sec GSX now, at only 5psi, so hopfully mid to low 13s when i run 10psi this spring.
SRT-4 owner with 2MCHPSI
iTrader: (8)
Joined: Jan 2002
Posts: 1,695
Likes: 0
From: your g/f house, Louisiana, US
Rep Power: 0 i ran mine on a gtec and with factory tires and rims on 8lbs with no tread, i ran a 14.9 @106 mph... once the car caught traction it took off like a rocket... there is no way to explain it.... it is freakin awesome... if i would have been able to catch traction, i think that i might have run a low 14-high13
Registered!!
iTrader: (3)
Joined: Feb 2003
Posts: 407
Likes: 0
From: Lake George, New York, US
Rep Power: 0 OK I'll try again-
I am running 8# boost with an EX basic SF kit.
Dyno was at 8# at the time w/ max speed 87.7mph at the dyno #'s I said. Dynojet dyno if that matters too.
Haven't run it w/ a 1/4 mile yet- didn't get car fully tuned until I was back in school and busy.
I use 91 or higher octane fuel...what else do you need for info? I want to help anyone here w/ the kit, not be rude like some people have been so ask away!
Oh and to answer iLLuMiNaTi:
I paid the first gb price and put it on w/ two other people last August.
I am running 8# boost with an EX basic SF kit.
Dyno was at 8# at the time w/ max speed 87.7mph at the dyno #'s I said. Dynojet dyno if that matters too.
Haven't run it w/ a 1/4 mile yet- didn't get car fully tuned until I was back in school and busy.
I use 91 or higher octane fuel...what else do you need for info? I want to help anyone here w/ the kit, not be rude like some people have been so ask away!
Oh and to answer iLLuMiNaTi:
I paid the first gb price and put it on w/ two other people last August.
