**Parts For Sale** EVERYTHING MUST GO!!!
Thread Starter
...ever grinning...
iTrader: (1)
Joined: Mar 2005
Posts: 464
Likes: 0
From: Itasca, IL
Rep Power: 0 
**Parts For Sale** EVERYTHING MUST GO!!!
So I traded my Civic in for a new car; now I have a bunch of parts sitting in my room:
- Neuspeed X-Type Strut-Tower-Bar ~Sold
- AEM Cone Filter on Brilliant Blue powdercoated SRI w/ K&N Recharge Kit and all rubber fittings, etc. (Fits all transmissions, only the Neuspeed STB though) ~(Spent $35 on the powdercoating)
- Tenzo R Rallye-II sport seat w/ Slider Bracket ~(Spent $65 on slider bracket)
- Tinted Altezza taillights
- Headlight eyelids for 01-03 non-Si
Ok, this stuff has been in my garage for waaaaaaay to long! Will someone please come and take it off my hands? Everything is best offer! The tails could use a gentle wetsand to get fine scratches out but otherwise good condition. The eyelids have some slight discoloration from the silver vinyl that used to be on them. The glue stuck and when it came off so did the carbon fiber print.
Thanks for stopping by,
Vinnie
- Neuspeed X-Type Strut-Tower-Bar ~Sold
- AEM Cone Filter on Brilliant Blue powdercoated SRI w/ K&N Recharge Kit and all rubber fittings, etc. (Fits all transmissions, only the Neuspeed STB though) ~(Spent $35 on the powdercoating)
- Tenzo R Rallye-II sport seat w/ Slider Bracket ~(Spent $65 on slider bracket)
- Tinted Altezza taillights
- Headlight eyelids for 01-03 non-Si
Ok, this stuff has been in my garage for waaaaaaay to long! Will someone please come and take it off my hands? Everything is best offer! The tails could use a gentle wetsand to get fine scratches out but otherwise good condition. The eyelids have some slight discoloration from the silver vinyl that used to be on them. The glue stuck and when it came off so did the carbon fiber print.
Thanks for stopping by,
Vinnie
Last edited by JesterMasque; Mar 13, 2007 at 11:13 AM.
Registered!!
iTrader: (6)
Joined: Sep 2002
Posts: 1,754
Likes: 0
From: chicago, Other, ZEBRA
Rep Power: 305 ^^^ ditto
i'm confused on this. is the neuspeed bar you're selling a strut bar or a X brace?
the strut bar goes under the hood and the X brace goes under the car by the oil pan. please clearify.
thanks
i'm confused on this. is the neuspeed bar you're selling a strut bar or a X brace?
the strut bar goes under the hood and the X brace goes under the car by the oil pan. please clearify.
thanks
Headlight eyelids for 01-03 non-Si ~Take them
what color are they >?>let me know how much thankx
Tenzo R Rallye-II reclining racing seat w/ slider brackets ~$100 only 1 seat ???
what color are they >?>let me know how much thankx
Tenzo R Rallye-II reclining racing seat w/ slider brackets ~$100 only 1 seat ???
Thread Starter
...ever grinning...
iTrader: (1)
Joined: Mar 2005
Posts: 464
Likes: 0
From: Itasca, IL
Rep Power: 0 -Sorry, but I'd like to keep the sales local
-It's the strut tower bar. But I say X because it's the x-shape that allows any intake to be installed.
-The eyelids are carbon fiber print. And the seat brand new was $190 w/ shipping plus another $75 for the bracket AND the slider. So when you work it out you're saving about $165. And that's just a starting price so if you don't like it then make me an offer. Just don't lowball me to the ground.
Sorry it took so long guys, been busy recording this band and getting ready for school again.
Pics are up! ^^
-It's the strut tower bar. But I say X because it's the x-shape that allows any intake to be installed.
-The eyelids are carbon fiber print. And the seat brand new was $190 w/ shipping plus another $75 for the bracket AND the slider. So when you work it out you're saving about $165. And that's just a starting price so if you don't like it then make me an offer. Just don't lowball me to the ground.
Sorry it took so long guys, been busy recording this band and getting ready for school again.
Pics are up! ^^
Last edited by JesterMasque; Aug 20, 2006 at 01:24 AM.
Thread Starter
...ever grinning...
iTrader: (1)
Joined: Mar 2005
Posts: 464
Likes: 0
From: Itasca, IL
Rep Power: 0 I'll post a picture tonight when i get home. And I'm going to take the Tenzo seat off of the line-up because the back got dirty as hell... But it didn't look like anyone was interested in it anyway.
Thread Starter
...ever grinning...
iTrader: (1)
Joined: Mar 2005
Posts: 464
Likes: 0
From: Itasca, IL
Rep Power: 0 Damn... Ya know, when I had my Vic I was on here all the time but now I've been so busy with school that I haven't had much reason to and I totally forgot. But now I got all the pics you guys need so enjoy!
I'll take $75 for the bar, I got debts to pay off and if I get $75 that'll finish off one of them... Say first one to match $75 takes it?
I'll take $75 for the bar, I got debts to pay off and if I get $75 that'll finish off one of them... Say first one to match $75 takes it?
Thread Starter
...ever grinning...
iTrader: (1)
Joined: Mar 2005
Posts: 464
Likes: 0
From: Itasca, IL
Rep Power: 0 I got one other guy that asked me the same question just about the same time you did. Also, Keith (noVICe) inquired about the bar on Saturday so if he doesn't pick it up it's either yours or the other guy. Whoever finds the info and calls me first. Sending you a PM Sujak...
Thread Starter
...ever grinning...
iTrader: (1)
Joined: Mar 2005
Posts: 464
Likes: 0
From: Itasca, IL
Rep Power: 0 lol
Ok Sujak it's yours because the guy didn't get back to me even after I called him because I realized that he was inquiring a long time ago. So tomorrow is perfect. Just call me any time. Thanks.
By the way, no one is interested in the intake? This thing is seriously gorgeous and it would be an absolute waste to throw it away. I'm taking all offers on anything I got. Highest bidder takes the item!
Ok Sujak it's yours because the guy didn't get back to me even after I called him because I realized that he was inquiring a long time ago. So tomorrow is perfect. Just call me any time. Thanks.
By the way, no one is interested in the intake? This thing is seriously gorgeous and it would be an absolute waste to throw it away. I'm taking all offers on anything I got. Highest bidder takes the item!
all your the one that had it custom powdercoated, i havent seen you since the busse meet more than a year ago...
zack doesnt have an intake, he should buy it along with the neuspeed bar...
zack doesnt have an intake, he should buy it along with the neuspeed bar...
Thread Starter
...ever grinning...
iTrader: (1)
Joined: Mar 2005
Posts: 464
Likes: 0
From: Itasca, IL
Rep Power: 0 Sounding good Sujak.
Sorry Rufus, I am looking for local sales only... Anyone else in the Chicago area want an intake? Or anything else I have for that matter?
Sorry Rufus, I am looking for local sales only... Anyone else in the Chicago area want an intake? Or anything else I have for that matter?
Thread Starter
...ever grinning...
iTrader: (1)
Joined: Mar 2005
Posts: 464
Likes: 0
From: Itasca, IL
Rep Power: 0 Re: **Parts For Sale** EVERYTHING MUST GO!!!
I have the one seat. But I will part with it for conSIDERABLY less than the going price. Like I said, I am taking all reasonable offers for everything. Is there anything else you would be interested in?
