Gauge cluster test
Thread Starter
Joined: Aug 2002
Posts: 323
Likes: 1
From: Orlando, Florida
Rep Power: 0 
Gauge cluster test
I know there is a way to make the needles and all the indicator lights do a self 'test'. I have lost the instructions on how to do it and I can't find it after searching for an hour. I know one of the gurus knows this. Please help!
Thanks, Adam
Thanks, Adam
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 
....
Originally Posted by tinman
Here ya go:
1. Push and hold the trip/reset button.
2. Turn the lighting switch ON.
3. Turn the ignition switch ON. (don't start)
4. Within 5 seconds, turn the light switch OFF, then ON, then Off again.
5. Within 5 seconds, release the trip/reset button, then push and release 4 times more.
Takes a try or 2 to get it. The odometer has to be in mileage mode, NOT trip mode when you do this. All the needles will sweep back and forth once. To exit, turn off the ignition. Just push the trip button again to see the needles sweep again while in test mode.
1. Push and hold the trip/reset button.
2. Turn the lighting switch ON.
3. Turn the ignition switch ON. (don't start)
4. Within 5 seconds, turn the light switch OFF, then ON, then Off again.
5. Within 5 seconds, release the trip/reset button, then push and release 4 times more.
Takes a try or 2 to get it. The odometer has to be in mileage mode, NOT trip mode when you do this. All the needles will sweep back and forth once. To exit, turn off the ignition. Just push the trip button again to see the needles sweep again while in test mode.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
fatih717171
Archive - Wanted Parts (WTB's)
2
Jul 25, 2016 06:22 PM
Kyles24
Overheating or loss of coolant, heater blowing cold
0
Jul 12, 2015 09:15 PM
CivicsClass101
1st - 5th Generation Civic 1973 - 1995
0
Jul 9, 2015 11:14 AM
