**UPDATED: more parts and PIX** 01 HX Totalled... PARTING OUT SALE
#1
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Thread Starter
iTrader: (14)
Join Date: Sep 2001
Location: Los Angeles, CA
Age: 40
Posts: 3,101
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 **UPDATED: more parts and PIX** 01 HX Totalled... PARTING OUT SALE
Well I don't want to go into details about what happened cuz i'm still pretty sad about it... but my car is totalled... I got as much as I could off the car so I will be selling locally for PICK UP ONLY in LA/Beverly/Westwood areas...
Here's what I got.. PICS NOW UP, IF YOU WANT MORE PICS OF SOMETHING I CAN POST THEM UP JUST ASK
1. APEXi N1 Full Catback Exhaust system.
-2.5 inch piping.
-4 inch tip
-fits HX/EX, will not fit DX,LX unless you have conversion pipe(like the tanabe one)
-comes with silencer
-will include adapter pipe to put stock muffler onto apexi piping, just bolt on the stock muffler if you get a fix it ticket like i did (shown in pics)
-asking price $340
2. Custom 2.5 inch HX Downpipe w/ o2 sensor
-connects header to catback
-bypasses HX's 2nd cat under the car
-you need an o2 simulator (#3) so CEL won't turn on
-asking price $120
3. O2 simulator from caspers electronics (plug & play) $60
https://www.casperselectronics.com/M...ory_Code=honda
6. Wings west G5 Rear lip painted NBP, custom cut to fit Apexi N1 catback $100
7. A) OBX DX/LX/HX header w/ 2.5 inch collector, black coated $100
B) O2 Sensors for OBX Header with o2 simulator already soldered in $70
A AND B BOTH FOR $150
10. 17 inch Bronze 5zigen FN01RC RIMS w/falken ziex tires
-Rims got damaged from the accident but definitely reparable
-tires not leaking air
-asking price for all 4 w/tires $300
11. Injen Short Ram Intake (filter got pushed on the top a little) $50
12. ACT ProLite - XACT Flywheel $200 BRAND NEW
http://www.advancedclutch.com/produc...700cc,%20212mm
----------------------------------------------------
MORE STUFF FOR SALE ADDED WEDNESDAY 4-13-05
1. https://www.casperselectronics.com/M...Category_Code=
HID Shield for H4 $45
2. A)http://www.onlinecarstereo.com/CarAu...roductID=13204
Alpine SBR-102CR 10 inch Type-R sub in Compound Reflex Box $120
B) Kenwood 1000w Monoblock Amp $100
A AND B BOTH FOR $200
3. Kenwood KTCSR902 Sirus Recever Box BRAND NEW IN BOX NEVER USED... $40
http://www.mobileonesales.com/product_p/ktcsr902.htm
4. Kenwood Sirus Controller $30
3 AND 4 BOTH FOR $60
5. Stock Manual Shifter Assembly (if you want to go custom short shifter but don't want to cut your own) $30
8. HX/EX Stock front sway bar 25.4 mm w/ stock rubber bushings $30
9. Neuspeed red urethane bushings for stock front sway bar 25.4 mm $20
8 AND 9 BOTH FOR $40
10. EX stock rear sway bar 13mm $10
12. 15 inch EX Hubcaps (3 are perfect, one has 3 small scraches from slightly scraping the curb once, circled in the picture) $40
13. Scoche dash kit for aftermarket radios 01+ Civic $10
14. Scoche wire harness for aftermarket radios 01+ Civic $10
13 AND 14 BOTH FOR $15
15. Stock EX Tweeter Pods + Stock Pioneer Tweeters $30
16. Stock Coupe Muffler $30
PM me or reply to this thread if your interested
----------------------------------------------
5. SALE PENDING Tsunami Flush Mount Trunk Wing painted NBP $100
12. SALE PENDING Injen Filter Heat Shield $20
-------------
6. RSX Rear Sway Bar 19mm w/ stock rubber bushings $60
7. Energy Suspension greasable black urethane bushings for RSX 19mm bar $30
6 AND 7 BOTH FOR $80 SOLD
5. SOLD Generic Rear Upper Strut Bar $15
4. SOLD DC Sports Rear Lower Tie Bar (polished) $70
4. SOLD DC Sports Front Upper Strut Bar (polished) $100
9. SOLD SPC Rear Camber Kit $100
1. SOLD chocobo15_2000 Energy Suspension Motor Mount Bushings Red $25
11. SOLD "Honda VTEC" D17 spark plug wire cover custom painted red/white $10
Here's what I got.. PICS NOW UP, IF YOU WANT MORE PICS OF SOMETHING I CAN POST THEM UP JUST ASK
1. APEXi N1 Full Catback Exhaust system.
-2.5 inch piping.
-4 inch tip
-fits HX/EX, will not fit DX,LX unless you have conversion pipe(like the tanabe one)
-comes with silencer
-will include adapter pipe to put stock muffler onto apexi piping, just bolt on the stock muffler if you get a fix it ticket like i did (shown in pics)
-asking price $340
2. Custom 2.5 inch HX Downpipe w/ o2 sensor
-connects header to catback
-bypasses HX's 2nd cat under the car
-you need an o2 simulator (#3) so CEL won't turn on
-asking price $120
3. O2 simulator from caspers electronics (plug & play) $60
https://www.casperselectronics.com/M...ory_Code=honda
6. Wings west G5 Rear lip painted NBP, custom cut to fit Apexi N1 catback $100
7. A) OBX DX/LX/HX header w/ 2.5 inch collector, black coated $100
B) O2 Sensors for OBX Header with o2 simulator already soldered in $70
A AND B BOTH FOR $150
10. 17 inch Bronze 5zigen FN01RC RIMS w/falken ziex tires
-Rims got damaged from the accident but definitely reparable
-tires not leaking air
-asking price for all 4 w/tires $300
11. Injen Short Ram Intake (filter got pushed on the top a little) $50
12. ACT ProLite - XACT Flywheel $200 BRAND NEW
http://www.advancedclutch.com/produc...700cc,%20212mm
----------------------------------------------------
MORE STUFF FOR SALE ADDED WEDNESDAY 4-13-05
1. https://www.casperselectronics.com/M...Category_Code=
HID Shield for H4 $45
2. A)http://www.onlinecarstereo.com/CarAu...roductID=13204
Alpine SBR-102CR 10 inch Type-R sub in Compound Reflex Box $120
B) Kenwood 1000w Monoblock Amp $100
A AND B BOTH FOR $200
3. Kenwood KTCSR902 Sirus Recever Box BRAND NEW IN BOX NEVER USED... $40
http://www.mobileonesales.com/product_p/ktcsr902.htm
4. Kenwood Sirus Controller $30
3 AND 4 BOTH FOR $60
5. Stock Manual Shifter Assembly (if you want to go custom short shifter but don't want to cut your own) $30
8. HX/EX Stock front sway bar 25.4 mm w/ stock rubber bushings $30
9. Neuspeed red urethane bushings for stock front sway bar 25.4 mm $20
8 AND 9 BOTH FOR $40
10. EX stock rear sway bar 13mm $10
12. 15 inch EX Hubcaps (3 are perfect, one has 3 small scraches from slightly scraping the curb once, circled in the picture) $40
13. Scoche dash kit for aftermarket radios 01+ Civic $10
14. Scoche wire harness for aftermarket radios 01+ Civic $10
13 AND 14 BOTH FOR $15
15. Stock EX Tweeter Pods + Stock Pioneer Tweeters $30
16. Stock Coupe Muffler $30
PM me or reply to this thread if your interested
----------------------------------------------
5. SALE PENDING Tsunami Flush Mount Trunk Wing painted NBP $100
12. SALE PENDING Injen Filter Heat Shield $20
-------------
6. RSX Rear Sway Bar 19mm w/ stock rubber bushings $60
7. Energy Suspension greasable black urethane bushings for RSX 19mm bar $30
6 AND 7 BOTH FOR $80 SOLD
5. SOLD Generic Rear Upper Strut Bar $15
4. SOLD DC Sports Rear Lower Tie Bar (polished) $70
4. SOLD DC Sports Front Upper Strut Bar (polished) $100
9. SOLD SPC Rear Camber Kit $100
1. SOLD chocobo15_2000 Energy Suspension Motor Mount Bushings Red $25
11. SOLD "Honda VTEC" D17 spark plug wire cover custom painted red/white $10
Last edited by CivicHX01; 05-03-2005 at 12:33 AM.
#11
Bay Area
iTrader: (31)
Join Date: Feb 2002
Location: Yay Area 408
Posts: 5,585
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Goddam!!!! Sorry to hear Andrew. Ahhh the memories in Riverside, when i would see your *** driving around. Hope everything works out homie. Do you still happen to have the A and B pillars in the car? If so, how much do u want for them?
Last edited by NytRyder2k2; 04-10-2005 at 05:54 PM.
#12
Ultimate OG Member
iTrader: (11)
Join Date: Aug 2001
Location: Los Angeles
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 307 sorry to hear about your car Andrew. Sucks to hear another one go down. Not sure yet, but i'm gonna think about that spoiler.
Jeff
Jeff
Last edited by TopFuel; 04-10-2005 at 07:58 PM.
#13
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Thread Starter
iTrader: (14)
Join Date: Sep 2001
Location: Los Angeles, CA
Age: 40
Posts: 3,101
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 thanks for all the support... right now i'm driving a 91 civic as my beater ride... but yea, PM's have been replied to and I updated the list with the people that were interested...
#15
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Thread Starter
iTrader: (14)
Join Date: Sep 2001
Location: Los Angeles, CA
Age: 40
Posts: 3,101
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Originally Posted by dj02
Ill take ur heat sheild if the other buyer dosent come trew.
#17
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Thread Starter
iTrader: (14)
Join Date: Sep 2001
Location: Los Angeles, CA
Age: 40
Posts: 3,101
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Originally Posted by AlpineCivic
I see in your sig that your sale of the Strut bar is pending, if your buyer falls through Ill take it. ASAP
#23
The Declaration of Independence was written on marijuna paper
iTrader: (3)
Join Date: Apr 2004
Location: Chino Hills, Ca
Age: 47
Posts: 1,486
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 258 dibs on
6. RSX Rear Sway Bar 19mm w/ stock rubber bushings $60
What modifaction do I need to do to fit into a 01 LX?
If the DC sports tie bar is not sold yet I'll get that too.
PM sent.
6. RSX Rear Sway Bar 19mm w/ stock rubber bushings $60
What modifaction do I need to do to fit into a 01 LX?
If the DC sports tie bar is not sold yet I'll get that too.
PM sent.
#24
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Thread Starter
iTrader: (14)
Join Date: Sep 2001
Location: Los Angeles, CA
Age: 40
Posts: 3,101
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Originally Posted by NytRyder2k2
Andrew, will you ship the d17 vtec cover? If you will how much u want for it? Also, do you happen to have your a and b pillars?
and sorry i don't have access to the car anymore so i cant get anything else off of it, so no a/b pillars... insurance got it already...
#25
Registered!!
iTrader: (18)
Join Date: Feb 2004
Location: La Puente (626), California
Age: 43
Posts: 4,209
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 289 Sorry buddy, go ahead and sell the Strut Bar to someone else, I found a brand new one for just about the same price. Sorry and Thanks again.
#26
Registered!!
iTrader: (29)
Join Date: Jan 2002
Location: SoCal
Age: 39
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 296
Originally Posted by Ellocodetroit
dibs on
6. RSX Rear Sway Bar 19mm w/ stock rubber bushings $60
What modifaction do I need to do to fit into a 01 LX?
If the DC sports tie bar is not sold yet I'll get that too.
PM sent.
6. RSX Rear Sway Bar 19mm w/ stock rubber bushings $60
What modifaction do I need to do to fit into a 01 LX?
If the DC sports tie bar is not sold yet I'll get that too.
PM sent.
They didn't come with factory rear sway bars so you are pretty much stuck unless you want to drill into your chassis or buy the Progress Adapter Kit which is around $200 on True Honda.
#27
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
Thread Starter
iTrader: (14)
Join Date: Sep 2001
Location: Los Angeles, CA
Age: 40
Posts: 3,101
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0
Originally Posted by LiKEaFeRiO
They didn't come with factory rear sway bars so you are pretty much stuck unless you want to drill into your chassis or buy the Progress Adapter Kit which is around $200 on True Honda.
#30
Registered!!
iTrader: (2)
Join Date: Nov 2003
Location: (562) whittier, CA
Age: 38
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 wassup andrew...damn sorry to hear bout the accident...im interested in your stock exhaust... u dont happen to have the midpipe to it? and ur stock will work for EX coupe cuz i remember yours is HX...again sorry bout the accident man...