Rep Power: 304

this is the story, i hope u guys will read it and give me ideas.

THE PROBLEM

well about 1 month ago i changed my pullies. ever since the power steering pulley(the bigger one) kept loosing up so i had to tighten it. This morning, the power steering gave up....so im like "ahhh not again". i opened up my hood...and it will tottally loose.....lost the bolt.

but the worse thing is, the teeth in the pulley are striped....AND the power steering rod's teeth are striped also.

i tried to slide the stock pulley back in....but it wont go in...cuz the rod's teeth are striped.


POSSIBLE SOLUTIONS.

1. i can switch it back to stock and bring it to a dealer have the warranty cover it. but the catch is that my stock pulley's teeth is perfect....and the rod's are not....so they will catch me there.
2. go to honda and buy the power steering housing OR the rod (if its possible to take it out). but i doubt it that u can open the housing and take out the rod. the housing will be xpensive
3. post a thread on here for ppl's old housing
4. say f uck the power steering forever

PLZ HELP ME OUT ON THIS....THX FOR READING

2.

 
Rep Power: 393

ROFL. I say try 1,2, and 3.

Think of it this way... no power steering = more power