HP Full Race Header GB
Joined: Apr 2002
Posts: 5,263
Likes: 0
From: Western MA
Rep Power: 348 
Originally Posted by scizod
I read the DIY and it says this:
"Now on the LX automatic you don’t have to cut the motor mount it will go right on. With the LX or EX manuals you will have to cut the right side of the front motor mount. Use the hacksaw to cut as much as you can off. You may need to use the hand hacksaw if you run out of room."
It does not say anything about the EX Automatic? Let me know if this DIY is correct.
"Now on the LX automatic you don’t have to cut the motor mount it will go right on. With the LX or EX manuals you will have to cut the right side of the front motor mount. Use the hacksaw to cut as much as you can off. You may need to use the hand hacksaw if you run out of room."
It does not say anything about the EX Automatic? Let me know if this DIY is correct.
wow dude, your a real pain in the ***.
Registered!!
Joined: Mar 2005
Posts: 256
Likes: 0
Rep Power: 0 What the hell do you mean by that....
Originally Posted by scatman
wow dude, your a real pain in the ***.
Registered!!
Joined: Mar 2005
Posts: 256
Likes: 0
Rep Power: 0 Do we have enough buyers.....
Originally Posted by truehonda
Just PM us, its kind of going and kind of not 
Registered!!
Joined: Mar 2005
Posts: 256
Likes: 0
Rep Power: 0 any yet....
Originally Posted by truehonda
280 AFTER THE GB, its 245 now 
Registered!!
Joined: Jun 2005
Posts: 31
Likes: 0
Rep Power: 0 
I want this header!!!!! but before I need some measure. The diameter of the primary tubes, and the gauge. The diameter of the colector tube. And the measure of the flange.
I need to a Dyno chart to probe that it gain 14 HP
I need to a Dyno chart to probe that it gain 14 HP
Registered!!
Joined: Jun 2005
Posts: 31
Likes: 0
Rep Power: 0 can you give the measure of the tubes???
And sorry but, I need to cut the front mount in my civic, 03, ex, manual, sedan???
This is what they said in tht DIY.
what is the diference between tht other header from HP racing thta you have????
And sorry but, I need to cut the front mount in my civic, 03, ex, manual, sedan???
This is what they said in tht DIY.
what is the diference between tht other header from HP racing thta you have????
Registered!!
Joined: Jan 2003
Posts: 345
Likes: 0
From: Ontario, Canada
Rep Power: 0 I have a tanabe full cat back for my 02 ex coupe auto, do I just need the top portion or do I need the full header??
Will u ship to Toronto, Canada?
LMK, if everything work out, I am in !!!!!!!!!!
Will u ship to Toronto, Canada?
LMK, if everything work out, I am in !!!!!!!!!!
We can work it out no problem what so ever. We ship to CAN and your exhaust will bolt up perfectly to the header. You can use the entire full header and cat. BTW, the GB has been over for a while, so let me know.
Edward
Edward
Registered!!
Joined: Jan 2003
Posts: 345
Likes: 0
From: Ontario, Canada
Rep Power: 0 So how much am I paying for the full header? $280 or $245? and how much is the shipping fee, LMK and send me a PM.
Originally Posted by truehonda
We can work it out no problem what so ever. We ship to CAN and your exhaust will bolt up perfectly to the header. You can use the entire full header and cat. BTW, the GB has been over for a while, so let me know.
Edward
Edward
