DarkSouljur's Build Thread
#32
Registered!!
Thread Starter
Join Date: Sep 2010
Location: Ottawa, Canada
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 174 Re: DarkSouljur's Build Thread
@civicnoobie: Yea i like the rims but i preffer the ones on the 04-05 civic ex, there's a civic where i live and he has the rims but the inside part painted black and they look amazing, if i had a picture i'd put it up, but these are the rims i want (obviously i want to paint them black too):
@mac: where is the build thread? I don't see it :S
@mac: where is the build thread? I don't see it :S
#34
Re: DarkSouljur's Build Thread
@civicnoobie: Yea i like the rims but i preffer the ones on the 04-05 civic ex, there's a civic where i live and he has the rims but the inside part painted black and they look amazing, if i had a picture i'd put it up, but these are the rims i want (obviously i want to paint them black too):
@mac: where is the build thread? I don't see it :S
@mac: where is the build thread? I don't see it :S
#35
Whachya lookin at?
iTrader: (1)
Join Date: May 2009
Location: Canada
Age: 38
Posts: 6,388
Likes: 0
Received 11 Likes
on
7 Posts
Rep Power: 289 Re: DarkSouljur's Build Thread
I can't believe I haven't posted here yet your car looks awesome... When I saw the picture of the trailer you had me fooled for a second.. I was like no *(#&%(*# way he is pulling that LOL then I read it.
+1 for you for a nice car and foolin' me.
+1 for you for a nice car and foolin' me.
#37
Live for the Twisties
Administrator
Join Date: Jun 2010
Location: Langley, BC
Posts: 8,580
Likes: 0
Received 5 Likes
on
5 Posts
Rep Power: 260 Re: DarkSouljur's Build Thread
It's looking good man.
Check out fit sport wheels, they're basically identical to our stockies except polished and they look sick. You could probably polish your wheels for $20 if you don't mind the labour involved.
Check out fit sport wheels, they're basically identical to our stockies except polished and they look sick. You could probably polish your wheels for $20 if you don't mind the labour involved.
#39
Registered!!
Thread Starter
Join Date: Sep 2010
Location: Ottawa, Canada
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 174 Re: DarkSouljur's Build Thread
Hmm the fit ones don't look to bad, how big r they? 15? Cuz i'm looking for 16 possibly 17, not sure about rims yet though.
@Lopes: Oh god i bought the car with dents on the passenger fender, 2 weeks later someone hits me now i have the same dent on both fenders. The there are 3 small dents on the passenger side that form like a triangle shape, when someone leans on my fender they all pop in and make one giant dent so i have to go under the wheel well cover and pop it out with my hand, it's happened so many times lol
@Lopes: Oh god i bought the car with dents on the passenger fender, 2 weeks later someone hits me now i have the same dent on both fenders. The there are 3 small dents on the passenger side that form like a triangle shape, when someone leans on my fender they all pop in and make one giant dent so i have to go under the wheel well cover and pop it out with my hand, it's happened so many times lol
#40
Re: DarkSouljur's Build Thread
Hmm the fit ones don't look to bad, how big r they? 15? Cuz i'm looking for 16 possibly 17, not sure about rims yet though.
@Lopes: Oh god i bought the car with dents on the passenger fender, 2 weeks later someone hits me now i have the same dent on both fenders. The there are 3 small dents on the passenger side that form like a triangle shape, when someone leans on my fender they all pop in and make one giant dent so i have to go under the wheel well cover and pop it out with my hand, it's happened so many times lol
@Lopes: Oh god i bought the car with dents on the passenger fender, 2 weeks later someone hits me now i have the same dent on both fenders. The there are 3 small dents on the passenger side that form like a triangle shape, when someone leans on my fender they all pop in and make one giant dent so i have to go under the wheel well cover and pop it out with my hand, it's happened so many times lol
haha oh man thats rough.. I have MANY small dents and nicks all around, people hey man nice car, and I am just like ya, "Don't come up to close though.."
#42
Re: DarkSouljur's Build Thread
I've been considering bringing my car to a PDR shop. There's a place called dent tec in Ottawa that charges $90 for the first dent and $10 for each additional dent which seems reasonable.
#43
Re: DarkSouljur's Build Thread
Yea, I have a lot of small dents and dings on the passenger door that were there when I bought the car. I always try to park further away from cars at parking lots and walk the extra distance than to risk having a shopping cart or something put anymore dents...
I've been considering bringing my car to a PDR shop. There's a place called dent tec in Ottawa that charges $90 for the first dent and $10 for each additional dent which seems reasonable.
I've been considering bringing my car to a PDR shop. There's a place called dent tec in Ottawa that charges $90 for the first dent and $10 for each additional dent which seems reasonable.
really? I have been thinking about making a trip to maco with my dad, his truck is in rough shape too. Im not sure if any of my dents are worth 90 bucks though..
#44
Registered!!
Thread Starter
Join Date: Sep 2010
Location: Ottawa, Canada
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 174 Re: DarkSouljur's Build Thread
Yea, I have a lot of small dents and dings on the passenger door that were there when I bought the car. I always try to park further away from cars at parking lots and walk the extra distance than to risk having a shopping cart or something put anymore dents...
I've been considering bringing my car to a PDR shop. There's a place called dent tec in Ottawa that charges $90 for the first dent and $10 for each additional dent which seems reasonable.
I've been considering bringing my car to a PDR shop. There's a place called dent tec in Ottawa that charges $90 for the first dent and $10 for each additional dent which seems reasonable.
#45
Registered!!
Thread Starter
Join Date: Sep 2010
Location: Ottawa, Canada
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 174 Re: DarkSouljur's Build Thread
Update: July 4th 2011 - Tinted Tail Lights.
So i've always liked the black tail light look, went out and bought a thing of VHT and tinted my tails last night. I wanted them to have a matte look on purpose, i could have done this properly and made them all shiny but i like them the way they are. All i did was clean them, put one layer of VHT, waited 45 mins, another layer of VHT, came back 3 hours later (recommended time to handle them after spray) and then applied a layer of clear coat, waited and hour and a half them put em on my car and let them sit overnight. The outcome was much nicer than i thought and i'm getting a great amount of light through these things. I think that the law here says you have to have at least one light clearly visible when you brake (don't quote me on that), but i have my spoiler light which shines brighter than the tails ever did so i'm fine. All my friends think it's an improvement, i do too but i know not everyone likes them :P
Pics
I forgot to take pics before install so here's the after:
I also bought type a side skirts and a rear lip today, hoping to put them on in the next couple of days, so i'll keep u updated.
So i've always liked the black tail light look, went out and bought a thing of VHT and tinted my tails last night. I wanted them to have a matte look on purpose, i could have done this properly and made them all shiny but i like them the way they are. All i did was clean them, put one layer of VHT, waited 45 mins, another layer of VHT, came back 3 hours later (recommended time to handle them after spray) and then applied a layer of clear coat, waited and hour and a half them put em on my car and let them sit overnight. The outcome was much nicer than i thought and i'm getting a great amount of light through these things. I think that the law here says you have to have at least one light clearly visible when you brake (don't quote me on that), but i have my spoiler light which shines brighter than the tails ever did so i'm fine. All my friends think it's an improvement, i do too but i know not everyone likes them :P
Pics
I forgot to take pics before install so here's the after:
I also bought type a side skirts and a rear lip today, hoping to put them on in the next couple of days, so i'll keep u updated.
#46
Re: DarkSouljur's Build Thread
Update: July 4th 2011 - Tinted Tail Lights.
So i've always liked the black tail light look, went out and bought a thing of VHT and tinted my tails last night. I wanted them to have a matte look on purpose, i could have done this properly and made them all shiny but i like them the way they are. All i did was clean them, put one layer of VHT, waited 45 mins, another layer of VHT, came back 3 hours later (recommended time to handle them after spray) and then applied a layer of clear coat, waited and hour and a half them put em on my car and let them sit overnight. The outcome was much nicer than i thought and i'm getting a great amount of light through these things. I think that the law here says you have to have at least one light clearly visible when you brake (don't quote me on that), but i have my spoiler light which shines brighter than the tails ever did so i'm fine. All my friends think it's an improvement, i do too but i know not everyone likes them :P
Pics
I forgot to take pics before install so here's the after:
I also bought type a side skirts and a rear lip today, hoping to put them on in the next couple of days, so i'll keep u updated.
So i've always liked the black tail light look, went out and bought a thing of VHT and tinted my tails last night. I wanted them to have a matte look on purpose, i could have done this properly and made them all shiny but i like them the way they are. All i did was clean them, put one layer of VHT, waited 45 mins, another layer of VHT, came back 3 hours later (recommended time to handle them after spray) and then applied a layer of clear coat, waited and hour and a half them put em on my car and let them sit overnight. The outcome was much nicer than i thought and i'm getting a great amount of light through these things. I think that the law here says you have to have at least one light clearly visible when you brake (don't quote me on that), but i have my spoiler light which shines brighter than the tails ever did so i'm fine. All my friends think it's an improvement, i do too but i know not everyone likes them :P
Pics
I forgot to take pics before install so here's the after:
I also bought type a side skirts and a rear lip today, hoping to put them on in the next couple of days, so i'll keep u updated.
#47
That Dude with the Questions
Join Date: Jan 2011
Location: Ottawa, Ontario
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 174 Re: DarkSouljur's Build Thread
The law is that you must have 3 operating tail lights, with at least one being amber in colour. So the third brake light (spoiler or rear window) is all we really need to be amber.
#49
Registered!!
Thread Starter
Join Date: Sep 2010
Location: Ottawa, Canada
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 174 Re: DarkSouljur's Build Thread
I know and i'm so glad i got off my *** and did them. Personally like them better than red, it's different but it doesn't have that rice feel that ebay tails have lol
YES. It's pretty cheap to do if i recall. If you link me to the LEDs i should buy i'll order them asap and do them when it comes in
YES. It's pretty cheap to do if i recall. If you link me to the LEDs i should buy i'll order them asap and do them when it comes in
#50
Kenny the Ricer
iTrader: (1)
Re: DarkSouljur's Build Thread
Here are a few
Havent tried any of em, but they look pretty decent
http://cgi.ebay.com/ebaymotors/2-T10...Q5fAccessories
http://cgi.ebay.com/ebaymotors/2-x-T...Q5fAccessories
http://cgi.ebay.com/ebaymotors/2-X-C...Q5fAccessories
http://cgi.ebay.com/ebaymotors/2-x-T...Q5fAccessories
Or you can just go in ebay and type in T10 SMD LED, that's what I do
Havent tried any of em, but they look pretty decent
http://cgi.ebay.com/ebaymotors/2-T10...Q5fAccessories
http://cgi.ebay.com/ebaymotors/2-x-T...Q5fAccessories
http://cgi.ebay.com/ebaymotors/2-X-C...Q5fAccessories
http://cgi.ebay.com/ebaymotors/2-x-T...Q5fAccessories
Or you can just go in ebay and type in T10 SMD LED, that's what I do
#51
That Dude with the Questions
Join Date: Jan 2011
Location: Ottawa, Ontario
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 174 Re: DarkSouljur's Build Thread
do you think these would work? Or are they too long? .
http://cgi.ebay.ca/LED-WHITE-BACKUP-...item2c5dd1b365
http://cgi.ebay.ca/LED-WHITE-BACKUP-...item2c5dd1b365
#53
Re: DarkSouljur's Build Thread
do you think these would work? Or are they too long? .
http://cgi.ebay.ca/LED-WHITE-BACKUP-...item2c5dd1b365
http://cgi.ebay.ca/LED-WHITE-BACKUP-...item2c5dd1b365
Ya if you get some LED reverse lights let me know how it goes please, I would love to throw some in.
#55
#56
Registered!!
Thread Starter
Join Date: Sep 2010
Location: Ottawa, Canada
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 174 Re: DarkSouljur's Build Thread
Lol make me your guinea pig why don't ya. Well i'm leaving for New York on Monday for a week, so i might order them tomorrow and hope that they don't come in till I'm back, but I'll definitely do it then post results. I'm not sure but i think shift-e wanted to do it to and if that's the case we'll probably do it together.
Here's kenny's thread https://www.civicforums.com/forums/2...installed.html
Here's kenny's thread https://www.civicforums.com/forums/2...installed.html