DIY Black Chrome Emblems!!!
Thread Starter
Eternal Blue Member
Joined: Aug 2005
Posts: 327
Likes: 0
From: san diego, CA
Rep Power: 256 
DIY Black Chrome Emblems!!! hey guys here's my latest mod. it was pretty easy to do...if you know how to paint well. i bought this paint from a hobby shop for about 5 bucks. its more of a tint than a spray...
and here's how it turned out. i used a hair dryer to heat up the rear emblems and fishing line to get them off.
as for the front...different people told me i had to take the bumper off but because im lazy i did it this way. i had regular printer paper wedged under the emblem and i taped newspaper all around the hood and bumper.
and it came out like this.
all in all the process took about 2 hours, taking the emblems off, painting, and putting them on. i used 3M red double sided tape to put them back on. all and any input is appreciated. thanks
and here's how it turned out. i used a hair dryer to heat up the rear emblems and fishing line to get them off.
as for the front...different people told me i had to take the bumper off but because im lazy i did it this way. i had regular printer paper wedged under the emblem and i taped newspaper all around the hood and bumper.
and it came out like this.
all in all the process took about 2 hours, taking the emblems off, painting, and putting them on. i used 3M red double sided tape to put them back on. all and any input is appreciated. thanks
I can dig!!! 
Registered!!
Joined: Sep 2005
Posts: 307
Likes: 0
From: So.Cal
Rep Power: 0 Great simple DIY dude +1 rep.
Stock cars or stock civics cause ive seen like the camry se with this but never a stock civic.
Originally Posted by gearbox
sweet ive seen a few stock cars that come like this with dark emblems.
Thread Starter
Eternal Blue Member
Joined: Aug 2005
Posts: 327
Likes: 0
From: san diego, CA
Rep Power: 256
Originally Posted by gearbox
ya stock cars in general. ive seen some tibbys with em too and camry maybe lexus too.
Originally Posted by Sujak
Hmm.. does the 3M tape work well to keep them on? Cause i wanna do this but i dont want them falling off, lol.
Originally Posted by juanotejano
Great simple DIY dude +1 rep.
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 
3m tape, when done right, will hold like a ****. you need to clean both surface with alcohol, make sure theres no dirt or wax, than also make sure its above 65F temp. then apply it with firm pressure holding for at least 30 seconds. do not let anything get wet for 24 hrs so adhesive can cure. when i had eyelids and put a few strips of this stuff, it was so hard to pull them off i was using all my strength i thought they were gonna break.
Looks good, do they have other colors like gunmetal or something so it could match certain rims? I too wonder how they would look on a silver coupe guess theres only one way to find out...
Thread Starter
Eternal Blue Member
Joined: Aug 2005
Posts: 327
Likes: 0
From: san diego, CA
Rep Power: 256
Originally Posted by EggRollBandit05
Looks good, do they have other colors like gunmetal or something so it could match certain rims? I too wonder how they would look on a silver coupe guess theres only one way to find out...
Thread Starter
Eternal Blue Member
Joined: Aug 2005
Posts: 327
Likes: 0
From: san diego, CA
Rep Power: 256
Originally Posted by gearbox
3m tape, when done right, will hold like a ****. you need to clean both surface with alcohol, make sure theres no dirt or wax, than also make sure its above 65F temp. then apply it with firm pressure holding for at least 30 seconds. do not let anything get wet for 24 hrs so adhesive can cure. when i had eyelids and put a few strips of this stuff, it was so hard to pull them off i was using all my strength i thought they were gonna break.
Joined: Feb 2006
Posts: 9,365
Likes: 0
From: Oregon
Rep Power: 347 Nice DIY, very creative and nice looking.
I would think using a heat gun and then using some goo-gone to remove any residue would do the trick.
I would think using a heat gun and then using some goo-gone to remove any residue would do the trick.
Originally Posted by gearbox
3m tape, when done right, will hold like a ****. you need to clean both surface with alcohol, make sure theres no dirt or wax, than also make sure its above 65F temp. then apply it with firm pressure holding for at least 30 seconds. do not let anything get wet for 24 hrs so adhesive can cure. when i had eyelids and put a few strips of this stuff, it was so hard to pull them off i was using all my strength i thought they were gonna break.
Yeah, I'm using the red 3m tape for my eyelids and my emblems and they've held for over 1 year now.
You may want to sand the emblems first... I only say that cuz tiny tiny chips of the black paint are coming off my emblems. If it gets worse, I'll sandpaper them again and repaint or just remove them
Thread Starter
Eternal Blue Member
Joined: Aug 2005
Posts: 327
Likes: 0
From: san diego, CA
Rep Power: 256
Originally Posted by blackonblack
nice. i want to do mine too. has anyone seen a nhb with black emblems?
Thread Starter
Eternal Blue Member
Joined: Aug 2005
Posts: 327
Likes: 0
From: san diego, CA
Rep Power: 256
Originally Posted by 2ME_EM2
josh even more of a drool. me and you are going to be suprised on how much both of our rides have changed.. 
Thread Starter
Eternal Blue Member
Joined: Aug 2005
Posts: 327
Likes: 0
From: san diego, CA
Rep Power: 256
Originally Posted by redrocket600
Isn't the rear H "rivited" in?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Touge
Canada East
0
Sep 18, 2015 12:13 AM
badbaja
6th Generation Civic 1996 - 2000
0
Sep 16, 2015 08:10 PM
