Rep Power: 306

Hey I did this DYI yesturday (march 1st). Jusat wanted to show it... IM not sure if anyone else has done this or not... Either way i like it and i think it looks good. it will look better when I get my other OEM headlights gunmetaled out JDM style.
Tell me what you think the DYI is.... Its pretty easy.

 
Rep Power: 0

looking good man

 
Rep Power: 306

does that mean you know what it is... or just saying it

LOL J/k

Thnx for the comp.

 
Rep Power: 0

you took out the bulbs for the blinkers?

 
Rep Power: 512

you made the parking light go on by itself instead of the turn signal and parking lights at same time. how yo do that? different bulb or what? i like how it looks by itself, but not as much with headligts on. if you could only have parking light on by self and turn signal lights go on with headlights

 
Rep Power: 343

http://www.7thgencivic.com/forums/sh...hreadid=142688

 
Rep Power: 306

No its not a diff bulb... actually it is quite easy... u take your parking light bulb out... and then look at it... you will see to fuse type "thingys" the one on the top is your high beam.. that is when you turn your parking light on, and then the one twards the bottom is your blinker. you follow the wires from the high beam and you can cut them; however, just because i would like to keep the bulb (because im cheap) i put electrical tape over the wires to the high beam so it is not touching positive and negative when you put it back in.... and BAMB... My blinkers work great and then that light does not turn on only when you turn your blinkers on.

 
Rep Power: 0

how about I want the light to come on only when I turn on my driving lights? and off when on parking lights beside the circle bulb?

 
Rep Power: 306

mmm.... To tell you the truth, Im not sure if i could say the correct thing... However, here would be my guess..... And if u were to try this u must be careful.....

ok you would set up everything the same.... however the difference would be... take two wires... connect one to the positive and one to the negative of the Original Headlight bulb Prongs... and then run those wires under the electrical tape of the parking light bulb.. That should work... it may be kinda hard to understand through words... however if it were something u really wanted im sure we could help

 
Rep Power: 0

I see what u're saying, I might just do that and splice the wires instead of using electrical tape to cover it off...if I do I'll let u guys know if I smoked anything lol

 
Rep Power: 306

Good luck! Hopefully it turns out good

 
Rep Power: 0

thnx but u guys would have to wait until march 15th in order to see this DIY b/c I have exams all next week and there's just no time on my hands.