Post your sedan pic!
Thread Starter
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 
just about any springs will sag. They were all made for coupe and the sedan has different rates. My prokit is slightly lower in back, but not too noticable. Maybe look for springs that have different part numbers for coupe and sedan.
Originally Posted by flipcrip
just wondering if anyone is riding on tein s-techs springs. i recently just recieved a set, but after reading a couple of threads about them, i am hesitating to slap them on.lol (should have the research before buying em) is it true that the rear will sag on our sedans. any further feed back will be greatly appreciated.
thanx
thanx
the back was low as hell
but now i have the kyb agx and its fine now
i wouldnt ge tthe stech unless you get new shocks.
Joined: Feb 2003
Posts: 9,950
Likes: 0
From: San Diego, Ca
Rep Power: 383
Originally Posted by davidoff1
not mine but it's nice from HFP
Last edited by runner1738; Apr 6, 2005 at 12:22 PM.
My Baby Daddy
iTrader: (14)
Joined: Nov 2002
Posts: 871
Likes: 0
From: Hillsborough, NJ
Rep Power: 0
Originally Posted by infinite012
fock 
majestic refused shipping of the rear bumper. now i have to buy from somewhere else
majestic refused shipping of the rear bumper. now i have to buy from somewhere else
Joined: Sep 2003
Posts: 15,682
Likes: 2
From: VA
Rep Power: 434
Originally Posted by PlasmaGT
What did they say? I just got a bumper from them.
Last time I had this much fun some furniture got broken!
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (1)
Joined: Mar 2004
Posts: 8,839
Likes: 2
From: PA
Rep Power: 360
Originally Posted by gearbox
can you get me those eyelids? looks good 
1. Buy ebay eyelids, Duplicolor paint/clear to match your color, 2x JB Quick
2. Paint eyelids...in a confined arear that you sprayed water in air in the previous day so less dust. Spray one thin layer of clear then get alot of thick layers.
3. Mix one JB Quick (like JB Weld but so much faster). Spread quickly on one eyelid. Push eyelid hard onto headlight housing holding the side that pops up and isnt the same shape as the housings. Clean any excess JB Quick with dry paper towels in other hand. After about 4 minutes clean the area up with the paper towels. repeat for other eyelid.
Reason I used JB Quick is cause now no matter how you try, the eyelids will break before the glue gives. So they are going NOWHERE
Last time I had this much fun some furniture got broken!
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (1)
Joined: Mar 2004
Posts: 8,839
Likes: 2
From: PA
Rep Power: 360
Originally Posted by eddieisaricer
Where can we buy spray paint to match our cars?
Even walmart has it but they cant help you match the color like an auto parts store will.
PPG paint (1 qt.) would have cost $30 + the cost to get is sprayed on + clear coated. (for eyelids and grill im talking about in this case). Cost me $20 in supplies and I did it myself. Saved at least $30.
Joined: Feb 2003
Posts: 9,950
Likes: 0
From: San Diego, Ca
Rep Power: 383
Originally Posted by mini-nsx
^ Find a Honda dealer in Malaysia...
Sounds like big bucks to me...
Sounds like big bucks to me...
