pics of lowered sedans?
Thread Starter
YoUnG N SuXsExFul
iTrader: (1)
Joined: Dec 2002
Posts: 4,533
Likes: 0
From: guam--> Bay area
Rep Power: 0 
pics of lowered sedans?
schools over so i can finally have time to lower my sedan...i have ground controls right now and i need pics of lowered sedan...i dont want to lower it too much..i was thinking maybe 1.5 inch or 1.75 inch...like goldlines...can anyone help me out?
Search and Learn
iTrader: (34)
Joined: May 2002
Posts: 14,004
Likes: 0
From: 909, Socal
Rep Power: 431 Originally posted by guamcivic2k1
how much of a drop is that? did you need a camber kit?
how much of a drop is that? did you need a camber kit?
you could do that too,
yes you will need camber kit with more drop than 1.75
Registered!!
iTrader: (6)
Joined: Apr 2002
Posts: 2,555
Likes: 0
From: Tinley Park, Illinois, US
Rep Power: 318 I'm gonna guess mine is somewhere close to 1.75". Maybe closer to 1.6".
Here's a closeup of the wheelgap.
I don't really know how much of a drop I have. I went out and measured the distance from the center of the wheel to the top of the wheelwell and the distance is 12-5/8" on front and back. If someone can measure this same distance on an unlowered EX sedan, we can figure out how much it's dropped.
Here's a closeup of the wheelgap.
I don't really know how much of a drop I have. I went out and measured the distance from the center of the wheel to the top of the wheelwell and the distance is 12-5/8" on front and back. If someone can measure this same distance on an unlowered EX sedan, we can figure out how much it's dropped.
Registered!!
iTrader: (6)
Joined: Apr 2002
Posts: 2,555
Likes: 0
From: Tinley Park, Illinois, US
Rep Power: 318 
I meant to answert that and I forgot. Yes, I have the SPC camber kit front and rear. I doubt the front one is really needed, but the rear will definitly need it. 
Registered!!
Joined: May 2003
Posts: 91
Likes: 0
From: SD
Rep Power: 0 You know you can get The camber set for $70 rear and the front for $20................
I personaly Im getting the ground control($329)
and use my stocks till I can save up for a set of tein or koni's
I will for the time being use the stock rims and tires till I get my rims and tires I want....
I will have the lowered kit done mid June. I will post a picture for ya
02 Lx Sedan
I personaly Im getting the ground control($329)
and use my stocks till I can save up for a set of tein or koni's
I will for the time being use the stock rims and tires till I get my rims and tires I want....
I will have the lowered kit done mid June. I will post a picture for ya
02 Lx Sedan
Search and Learn
iTrader: (34)
Joined: May 2002
Posts: 14,004
Likes: 0
From: 909, Socal
Rep Power: 431 Originally posted by tdog
You know you can get The camber set for $70 rear and the front for $20................
I personaly Im getting the ground control($329)
and use my stocks till I can save up for a set of tein or koni's
I will for the time being use the stock rims and tires till I get my rims and tires I want....
I will have the lowered kit done mid June. I will post a picture for ya
02 Lx Sedan
You know you can get The camber set for $70 rear and the front for $20................
I personaly Im getting the ground control($329)
and use my stocks till I can save up for a set of tein or koni's
I will for the time being use the stock rims and tires till I get my rims and tires I want....
I will have the lowered kit done mid June. I will post a picture for ya
02 Lx Sedan
theres groupbuy for SPC camber kit. 99.95 shipped for rear. 25 for front
Prowlin' with a Purpose
iTrader: (16)
Joined: Nov 2002
Posts: 5,239
Likes: 0
From: Minnesota
Rep Power: 338 
i have neuspeed sport springs, no rims, or camber kit.. yes i do need one for the rear.. the front should be fine and the overall height of ur car will be the same as the stock coupes...
Last edited by WannaBFast; May 28, 2003 at 09:34 PM.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
juror
Suspension DIY
6
Jul 30, 2019 03:28 AM
EM_WON
Suspension Performance Modifications
4
Jul 22, 2015 06:49 PM
