progress rear camber kit
Thread Starter
Registered!!
iTrader: (2)
Joined: Sep 2002
Posts: 324
Likes: 0
From: Long island, New York, US
Rep Power: 0 
progress rear camber kit
i just got a progress rear camber kit for 30 bucks i was wondering if its any good all it its is 4 bolts and spacers.
my question is that is there 2 types af rear camber kits like the ingalls is the whole arm and what i got is just the bolts and hardware. do they both do the same thing??
my question is that is there 2 types af rear camber kits like the ingalls is the whole arm and what i got is just the bolts and hardware. do they both do the same thing??
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 417 do you have a link to the auction? or do you have the part number? i dont think progress has made a kit for our cars yet. i know someone was selling the previous gen's camber kit and saying it would work for ours as well. its probably the same guy.
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 417 eh, theres no part numbers there so i wont know for sure.. but by "JDM PROGRESS CAMBER KIT 01-03 HONDA CIVIC" you should have known something was wrong.. JDM camber kit? come on now..
and if you goto progress camber kit applications you'll notice theres not camber kits for our cars
and if you goto progress camber kit applications you'll notice theres not camber kits for our cars
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 417 ya i would, its a very good price.. i think 138 shipped for both front and back.. if not groupbuycenter has just the rears for 125 shipped. not sure if its ingalls or spc tho
Registered!!
iTrader: (5)
Joined: May 2001
Posts: 2,317
Likes: 0
From: PG county, MD, Maryland, US
Rep Power: 0 i've seen a full set up wit springs and camber for our cars in one of my mags under new items
had to be Super Street cause that's the only one im subscribed to
i 'll check and see if i can find it.......
had to be Super Street cause that's the only one im subscribed to
i 'll check and see if i can find it.......
Registered!!
Joined: Sep 2001
Posts: 1,098
Likes: 0
From: San Mateo, California, US
Rep Power: 0 Just to let you know. The bolts and the spacers will not work on our cars. The bolts on 5th and 6th gens are perpendicular to the car and for our cars they are inserted from the bottom up. Just to let you know. I saw that a couple days ago. And to think I was telling myself, you would have to very intelligent to buy those(sarcastically, if you could not tell). Sorry to burst your bubble.
The Standard One
iTrader: (7)
Joined: Sep 2001
Posts: 11,659
Likes: 1
From: City of Angels, California, US
Rep Power: 417 aswzero, i know its easier to adjust it on the 6th gens civic but.. even when it is from the bottom up on our cars, isnt it possible for the control arm to lower atleast a little bit? i doubt it would stay at the same exact spot if you add 2 metal washers, it'll probably adjust the camber slightly no? i've been meaning to try it but been too lazy
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
juror
Suspension DIY
6
Jul 30, 2019 03:28 AM
NROD315
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
Jul 21, 2015 07:46 PM
