Rep Power: 0

I have notice that some of the civics has RSX Type-S sway bar installed in their car
i have installed that too from my fd. My tech. say that the link to the sway bar doesn't fit perfectly in the civic after installation. Is there any mod. that i need inorder to install it perfectly for there is some parts that need to be change in order to work? Thank you very much for u're reply

 
Rep Power: 367

strange. the endlink fitted fine for me... and many others.

what year civic do you have? and what trim?

 
Rep Power: 0

i have the RSX 19mm rear anti-sway bar in my 01 EX Coupe, and it fit fine and is the most awesome suspension mod i've done

if you have a [US model] 2001 EX, or 2002 LX/EX the sway bar should fit just fine.

 
Rep Power: 0

will it fit on HX coupe?

 
Rep Power: 0

every civic besides the EX/Si needs to be modded, becauxe the LX DX HX etc. dont have a rear swaybar. the RSX type S one fits on a EX civic flawlessly with the right parts that i put in my sway bar kits

 
Rep Power: 318

Didn't Honda add rear sway bars to the '02+ model of the LX/DX?.

 
Rep Power: 0

I have a Canadian 2001 Civic Si and i install a RSX-type S sway bar
the link to the bar fit, but the link is twisted forward for the bar to be installed
i was just worry about would the link break if is like that. thanks for u're reply.

 
Rep Power: 0

I have a EX Coupe with the JDM RSX/Integra Type-R 22mm anti-swaybar, it fit perfectly. So well in fact, the install time was below 10 minutes with the right tools.